• Journal of KSNVE
• /
• v.10 no.4
• /
• pp.584-595
• /
• 2000

We design a new actuator for high density optical device in order to control the radial tilting motion. The newly designed actuator makes it possible to control the tilting motion actively, while the coventional actuator compress tilting motion with passive spring. First of all, We present 3-dimensional modeling of actuator and accomplish the modal analysis and magnetic analysis of actuator. Due to these results, a new designed actuator has performance of high sensitivity and high second resonance frequency. Secondly, We present the 3-DOF dynamic modeling of the 4-wire spring type actuator. sensitivity analysis is performed to consider the assembling error, such as the difference of mass center and force center. From these results, the sensitivities of rotation due to the assembly error are revealed and design criteria of rotation is presented. And experimental results of a newly designed actuator are presented and compared with theoretical results. Finally, We propose a dynamic tilt compensation and high acceleration actuator for high density optical storage devices.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.40-47
• /
• 2014

An average current mode control scheme that consistently offers good dynamic performance for LLC series resonant DC-to-DC converters irrespective of the changes in the operational conditions is presented in this paper. The proposed control scheme employs current feedback from the resonant tank circuit through an integrator-type compensation amplifier to improve the dynamic performance and enhance the noise immunity and reliability of the feedback controller. Design guidelines are provided for both current feedback and voltage feedback compensation. The performance of the new control scheme is demonstrated through an experimental 150 W converter operating with 340 V to 390 V input voltage to provide a 24 V output voltage.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.11 s.188
• /
• pp.85-92
• /
• 2006

For the improvement of a conventional railway speed, tilting train(Tilting Train express) is under the development aiming for a maximum speed 180km/h. Compared to the existing conventional rolling-stock, tilting train could take an advantage of speed improvement about $20{\sim}30%$ on curve sections due to the improvement of cowing performance. However, this speed increasement creates a severe load at wheels, thus it is necessary to study the safety of wheel for tilting train preferentially. On the other hand, it is under consideration that the wheel for conventional railway rolling-stock at speeds of 150km/h will be applied to tilting train at speeds of 180km/h. In this paper, we have studied the strength of wheel structure, the geometrical contact characteristics, and the dynamic performance of wheel to evaluate the safety of wheel for tilting train.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.854-855
• /
• 2011

Active suspension technology of railway vehicles has received attention as the way to replace the current passive suspension. This paper deals with the dynamic performance of an active suspension system for a railway vehicle. To verify performance of an active suspension, the dynamic performance of the railway vehicle with active suspension system analyzed and compared with conventional suspension system by using the VI-rail program.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10A
• /
• pp.1756-1763
• /
• 2001

In this paper, we propose an ATM-LAN IWU(interworking unit) with threshold based dynamic bandwidth allocation scheme. We analyze a discrete-time based finite queueing model with deterministic service times in order to investigate the performance of the proposed scheme. It is known that the arrival process of IP packets is bursty. So we use an MMPP(Markov Modulated Poisson Process) to model the bursty input traffic. As performance measures, we obtain the packet loss probability and the mean packet delay. We present some numerical results to show the effects of the thresholds on the performance of the DBAS(dynamic bandwidth allocation scheme).

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.1
• /
• pp.125-129
• /
• 2016

In this paper, we propose an efficient dynamic workload balancing strategy which improves the performance of high-performance computing system. The key idea of this dynamic workload balancing strategy is to minimize execution time of each job and to maximize the system throughput by effectively using system resource such as CPU, memory. Also, this strategy dynamically allocates job by considering demanded memory size of executing job and workload status of each node. If an overload node occurs due to allocated job, the proposed scheme migrates job, executing in overload nodes, to another free nodes and reduces the waiting time and execution time of job by balancing workload of each node. Through simulation, we show that the proposed dynamic workload balancing strategy based on CPU, memory improves the performance of high-performance computing system compared to previous strategies.

• International Journal of Reliability and Applications
• /
• v.2 no.1
• /
• pp.37-48
• /
• 2001

This paper presents a new dynamic human reliability analysis method and its application for quantifying the human error probabilities in implementing management action. For comparisons of current HRA methods with the new method, the characteristics of THERP, HCR, and SLIM-MAUD, which are most frequency used method in PSAs, are discussed. The action associated with implementation of the cavity flooding during a station blackout sequence is considered for its application. This method is based on the concepts of the quantified correlation between the performance requirement and performance achievement. The MAAP 3.0B code and Latin Hypercube sampling technique are used to determine the uncertainty of the performance achievement parameter. Meanwhile, the value of the performance requirement parameter is obtained from interviews. Based on these stochastic obtained, human error probabilities are calculated with respect to the various means and variances of the things. It is shown that this method is very flexible in that it can be applied to any kind of the operator actions, including the actions associated with the implementation of accident management strategies.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.5 s.27
• /
• pp.78-88
• /
• 2005

Given the trend of increased apartment buildings and high-rise buildings, the maintenance of apartment buildings has been set a higher value. For this reason, a total performance evaluation model of the existing buildings has recently been developed. But, it has a lack of the management work analysis. The purpose of this study, therefore, is the management work analysis for items selection of maintenance performance evaluation of apartment buildings. Candidate items of Maintenance performance evaluation was made with the existing literature and business system analysis. Easy systemicity of performance evaluation supplemented doing question to academic experts and housing managers. Finally decided maintenance performance evaluation items are to classify 14 administrative and 15 technical items.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.357-362
• /
• 2002

Most of battery industries are growing explosively as a core strategy industry for the development of the semi-conductor, the LCD, and the mobile communication device. In this thesis, dynamic characteristics of the steel can labeling machine on the automatic cell assembly line are studied. Dynamic characteristic analysis consists of dynamic behavior analysis and finite element analysis and is necessary for effective design of machines. In the dynamic behavior analysis, the displacement, velocity, applied force and angular velocity of each components are simulated according to each part. In the FEA, stress analysis, mode analysis, and frequency analysis are performed for each part. The results of these simulations are used for the design specification investigation and compensation for optimal design of cell manufacturing line. Therefore, Virtual Engineering of the steel can labeling machine on the automatic cell assembly line systems are modeled and simulated. 3D motion behavior is visualized under real-operating condition on the computer window. Virtual Prototype make it possible to save time by identifying design problems early in development, cut cost by reducing making hardware prototype, and improve quality by quickly optimizing full-system performance. As the first step of CAE which integrates design, dynamic modeling using ADAMS and FEM analysis using NASTRAN are developed.

• Journal of information and communication convergence engineering
• /
• v.15 no.1
• /
• pp.28-36
• /
• 2017

The medium access control (MAC) protocol based on dynamic time division multiple access/time division duplex (TDMA/TDD) is responsible for random access control and radio resource allocation in dynamic traffic environments. These functions of random access and resource allocation are very important to prevent wastage of resources and improve MAC performance according to various network conditions. In this paper, we propose new random access and resource allocation schemes to guarantee quality of service (QoS) and provide priority services in a dynamic TDMA/TDD system. First, for the QoS guarantee, we propose an adaptive random access and resource allocation scheme by introducing an access probability. Second, for providing priority service, we propose a priority-based random access and resource allocation scheme by extending the first adaptive scheme in both a centralized and a distributed manner. The analysis and simulation results show that the proposed MAC protocol outperforms the legacy MAC protocol using a simple binary exponential backoff algorithm, and provides good differential performance according to priorities with respect to the throughput and delay.