• 한국전문물리치료학회지
• /
• 제29권1호
• /
• pp.1-10
• /
• 2022

Background: Neck pain is a major health problem in developed countries and has a lifetime prevalence of 50%. Major problems include a reduced cervical range of motion, muscle stiffness, dysfunction, postural changes, and decrease in psychosocial level. Objects: This study aimed to investigate the effects of applying the upper trapezius inhibition dynamic taping to patients with chronic neck pain on their neck pain, functional level, cervical range of motion, psychosocial level, and neck posture. Methods: The study design was a randomized controlled trial. A total of 40 patients with neck pain participated in this study and were randomly assigned to a Dynamic Taping group (n = 20) or Sham Taping group (n = 20). In both groups, basic intervention cervical pain control therapy and shoulder stabilization exercise program were performed. In addition, dynamic taping and sham taping were applied to participants in the Dynamic Taping and Sham Taping groups to inhibit the trapezius muscle, respectively. All interventions were performed three times a week and a total of 12 times for 4 weeks, and the participants' neck pain, functional impairment level, cervical range of motion, psychosocial level, and neck posture were measured and compared before and after the intervention. Results: Both groups showed significant differences in neck pain, functional level, cervical range of motion, psychosocial level, and neck postural before and after the intervention (p < 0.05). Moreover, there were significant differences between the two groups regarding the functional level and neck posture (p < 0.05). Conclusion: Inhibition dynamic taping of the upper trapezius muscle suppression is an effective method with clinical significance in reducing pain in individuals with chronic neck pain and improving the functional level, cervical range of motion, psychosocial level, and neck posture.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1322-1326
• /
• 1990

In this paper, compliant motion control of a manipualator in manipulator is proposed by using the self-tuning adaptive controller. Compliant motion is needed in order to applicated to complicated and accurate fields such as assembly operation in which several parts are matched. For a control method of compliant motion hybrid control is used so forces and position control are proposed selectively through a closed feedback loop. By contacting with environment, the uncertainties higher. Self-tuning controller which adapts to variable dynamic response is applied to compliant motion control in order to satisfy the desired operation. The applicability of the suggested algorithm was confirmed by simulation of the contour tracking task of four joint manipulator.

• Journal of Mechanical Science and Technology
• /
• 제16권1호
• /
• pp.83-93
• /
• 2002

This paper presents a motion control method and its simulation results of a mobile robot for a lattice type welding. Its dynamic equation and motion control methods for welding speed and seam tracking are described. The motion control is realized in the view of keeping constant welding speed and precise target line even though the robot is driven for following straight line or curve. The mobile robot is modeled based on Lagrange equation under nonholonomic constraints and the model is represented in state space form. The motion control of the mobile robot is separated into three driving motions of straight locomotion, turning locomotion and torch slider control. For the torch slider control, the proportional-integral-derivative (PID) control method is used. For the straight locomotion, a concept of decoupling method between input and output is adopted and for the turning locomotion, the turning speed is controlled according to the angular velocity value at each point of the corner with range of 90$^{\circ}$ constrained to the welding speed. The proposed control methods are proved through simulation results and these results have proved that the mobile robot has enough ability to apply the lattice type welding line.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.57-62
• /
• 2003

This paper describes the design and simulation of a multivariable optimal control system for the combined speed, heading and depth control of a Semi-Autonomous Underwater Vehicle (SAUV) developed in Korea Ocean Research and Development Institute (KRODI). The SAUV is a test-bed for the evaluation of the navigation and manipulator technologies developed for a mine disposal vehicle (MDV) in military use and for a light working underwater vehicle in scientific use. The vehicle was designed to control its cruising speed, heading and depth with 4 horizontal thrusters installed at the rear of the hull. Therefore, the decoupled control methods are limited to apply to the SAUV because the thrust forces are highly coupled with the surging, yawing, and pitching motion of the vehicle. The multivariable Linear Quadratic (LQ) control method is chosen to control steering and diving in variable speed motion automatically. A series of simulation is carried out with fully nonlinear six degree of freedom dynamic model to validate the controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.765-768
• /
• 2000

Linearization of the biped dynamic equations and design of linear controller for the linearized equations are studied in this paper. The biped robot with inverted pendulum type trunk, used to stabilize the dynamic balancing of the biped robot during dynamic walking period, is modelled with 14 DOF and simulated. Despite of well defined linear control theories so far, the linear control methods was limited to the applications for a walking robot, because they have been inherently strong nonlinear properties, such as a modeling parameter uncertainties, external forces as noise, inertial and Coriolis terms by three dimensional modeling and so on. To linearize the nonlinear equations of motion of biped robot on MIMO and time varying linear equations of motion, 1st order Taylor series is used to formulate the linear equation. And a 2nd order numerical perturbation method Is used to approximate partial differential equations. Using the linearized equations of motion, a linear controller is designed by pole placement method with feed forward compensation. Using the obtained linearized equations and linear controller, the continuous walking simulation is performed.

• 제어로봇시스템학회논문지
• /
• 제15권8호
• /
• pp.823-830
• /
• 2009

For developing automotive parts and telematics devices the real car test often shows limitation because it needs high cost, much time and has the possibility of the accident. Therefore, a Vehicle Driving Simulator (VDS) instead of the real-car test has been used by some automotive manufactures, research centers, and universities. The VDS is a virtual reality device which makes a human being feel as if one drives a vehicle actually. Unlike actual vehicle, the simulator has limited kinematic workspace and bounded dynamic characteristics. So it is difficult to simulate dynamic motions of a multi-body vehicle model fully. In order to overcome these problems, a washout algorithm which restricts workspace of the simulator within the kinematic limits is needed, and analysis of dynamic characteristics is required also. However, a classical washout algorithm contains several problems such as time delay and generation of wrong motion signal caused by characteristics of filters. Specially, the classical washout algorithm has the simulator sickness when driver hardly turns brakes and accelerates the VDS. In this paper, a new washout algorithm is developed to enhance the motion sensitivity and improve the simulator sickness by using the vehicle tilt signal which is generated in the real time vehicle dynamic model.

• 한국전산구조공학회논문집
• /
• 제16권1호
• /
• pp.77-86
• /
• 2003

비행체의 선회운동 시 액체연료 저장탱크의 동응답을 ALE(arbitrary Lagrangian-Eulerian) 유한요소법을 이용하여 해석하였다. 연료탱크는 선회운동 시 내부 연료의 관성력에 의해 상당한 양의 충격하중을 받게 된다. 또한 이로 인해 유발된 큰 동 하중과 모멘트는 구조물의 안정성과 제어시스템에 영향을 미친다. 본 논문에서는 내부연료의 동적 영향력을 억제하기 위하여 링형배플을 채용하였다. 배플개수와 배플위치에 따른 연료탱크의 파라메트릭 해석을 통하여 연료탱크의 동응답 특성에 미치는 배플의 영향을 분석하였다. 유체와 구조물 사이의 연계는 ALE 유한요소법을 통하여 정확하고 효과적으로 처리되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.18-23
• /
• 1990

In this paper, the dynamic modeling and a tip-position controller of a single-link flexible manipulator are developed. To design the controller of a flexible manipulator, at first, it is required to obtain the accurate dynamic model of manipulator describing both rigid motion and flexible vibration. For this purpose, FEM(Finite Element Method) and Lagrange approach are utilized to obtain the dynamic model. After obtaining the dynamic model of a single-link manipulator, a controller which computes the input torque to perform the desired trajectory is developed using neural network.

• 전기학회논문지P
• /
• 제56권4호
• /
• pp.161-167
• /
• 2007

This paper introduces a dynamic walking control of biped walking robot using intelligent sensor interface and shows an intelligent control method for biped walking robot. For the dynamic walking control of biped walking robot, serious motion controllers are used. They are main controller(using INTEL80C296SA MPU), sub controller(using TMS320LF2406 DSP), sensor controller(using Atmega128 MPU) etc. The used sensors are gyro sensor, tilt sensor, infrared sensor, FSR sensor etc. For the feasibility of a dynamic walking control of biped walking robot, we use the biped walking robot which has twenty-five degrees of freedom(D.O.F.) in total. Our biped robot is composed of two legs of six D.O.F. each, two arms of five D.O.F. each, a waist of two D.O.F., a head of one D.O.F.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.127-132
• /
• 1998

Mobile wheeled robots are nonholonomically constrained systems. Generally, it is very difficult to describe the motion of mechanical systems with nonintegrable nonholonomic constraints. An objective of this study is to describe the motion of a robot with a free wheel. The motion of holonomically and/or nonholonomically constrained system can be simply determined by Generalized Inverse Method presented by Udwadia and Kalaba in 1992. Using the method, we describe the exact motion of the robot and determine the constraint force exerted on the robot for satisfying constraints imposed on it. The application illustrates the ease with which the Generalized Inverse Method can be utilized for the purpose of control of nonlinear system without depending on any linearization, maintaining precision tracking motion and explicit determination of control forces of nonholonomically constrained system.