• 한국농공학회지
• /
• 제38권5호
• /
• pp.74-84
• /
• 1996

Dynamic loading of structures often causes excursions of stresses well into the inelastic range and the influence of geometric changes on the dynamic response is also significant in many cases. Therefore, both material and geometric nonlinearity effects should be considered in case that a dynamic load acts on the structure. For developing a program to analyze the dynamic response of an axisymmetric shell in this study, the material nonlinearity effect on the dynamic response was formulated by the elasto-viscoplastic model highly corresponding to the real behavior of the material. Also, the geometrically nonlinear behavior is taken into account using a total Lagrangian coordinate system, and the equilibrium equation of motion was numerically solved by a central difference scheme. A complete finite element program has been developed and the results obtained by it are compared with those in the references 1 and 2. The results are in good agreement with each other. As a case study of its application, the developed program was applied to a dynamic response analysis of a nuclear reinforced concrete containment structure. The results obtained from the' numerical examples are summarized as follows : 1. The dynamic magnification factor of the displacement and the stress were unrelated with the concrete strength. 2. As shown by the results that the displacement dynamic magnification factor were form 1.7 to 2.3 and the stress dynamic magnification factor from 1.8 to 2.5, the dynamic magnification factor of stress were larger than that of displacement. 3. The dynamic magnification factor of stress on the exterior surface was larger than that on the interior surface of the structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.850-854
• /
• 2009

Approximate analysis for a building installed with a friction damper is revisited to get insight of its dynamic behavior. Energy balance equation is used to have a closed analytical form solution of dynamic magnification factor (DMF) for the building with combined viscous and friction damping. It is found out that DMF is dependent on friction force ratio and resonance frequency. Linear transfer function from input external force to output building displacement is obtained by simplifying DMF equation. Root mean square of building displacement is derived under earthquake-like random excitation. Finally, design of friction damper is proposed by processing target control ratio, damping ratio factor, and friction force in sequence.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1631-1635
• /
• 2011

To consider dynamic magnification effect at the static design stage, impact load factor is applied to design load. Current impact load factor adopted EUROCODE without verification while Japan suggested impact load factor including velocity of high-speed train throughout theoretical and experimental studies. On the purpose of evaluate current impact load factor, this study investigated the calculation of impact load factor from dynamic response of running train.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1636-1640
• /
• 2011

To consider dynamic magnification effect at the static design stage, impact factor is applied to design load. Current impact factor adopted EUROCODE without domestic verification through theoretical and experimental studies. This study evaluated impact factor of railway bridges from dynamic response under KTX running. Moving Average Method was applied to calculate impact factor. Investigation considering different type of bridges and tracks including velocity was conducted.

• Coupled systems mechanics
• /
• 제9권4호
• /
• pp.311-323
• /
• 2020

This paper deals with the effect of the mode shapes on the dynamic response of a multi-storey frame subjected to moving train loads which are modelled as loads of constant intervals with constant velocity using the finite element method. The multi-storey frame is modelled as a number of Bernoulli-Euler beam elements. First, the first few modes of the multi-storey frame are determined. Then, the effects of force span length to beam length ratio and velocity on dynamic magnification factor (DMF) are evaluated via 3D velocity-force span length to beam length ratio-DMF graphics and its 2D projections. By using 3D and 2D graphics, the directions of critical speeds that force the structure under resonance conditions are determined. Last, the mode shapes related to these directions are determined by the time history and frequency response graphs. This study has been limited by the vibration of the frame in the vertical direction.

• 한국소음진동공학회논문집
• /
• 제20권1호
• /
• pp.22-28
• /
• 2010

Approximate analysis for a building installed with a friction damper is performed to get insight of its dynamic behavior. Energy balance equation is used to have a closed analytical form solution of dynamic magnification factor(DMF). It is found out that DMF is dependent on friction force ratio and resonance frequency. Approximation of DMF and equivalent damping ratio of a friction damper is proposed with such assumption that the building with a friction damper shows harmonic steady-state response and narrow banded response behavior near resonance frequency. Linear transfer function from input external force to output building displacement is suggested from the simplified DMF equation. Root mean square of a building displacement is derived under earthquake-like random excitation. Finally, design procedure of a friction damper is proposed by finding friction force corresponding to target control ratio. Numerical analysis is carried out to verify the proposed design procedure.

• 한국터널지하공간학회 논문집
• /
• 제19권5호
• /
• pp.717-732
• /
• 2017

최근 급증하는 도로 교통량을 원활히 처리할 수 있는 대안으로 복층터널과 같은 지하구조물의 건설이 증가하고 있다. 복층터널은 내부에 상부와 하부를 분리하는 중간슬래브가 존재한다. 중간슬래브는 차량이 주행할 때 발생하는 차량의 동적하중으로 인하여 동적거동을 하게 되며, 그 동적거동을 정확히 파악하여 설계 및 해석에 이용하는 것이 중요하다. 본 연구에서는 복층터널 중간슬래브의 구조형식, 설계속도, 주행차량 및 노면조도 등을 고려한 해석모델을 작성하고 노면에 차량이 일정속도로 주행하는 경우에 대해 3차원 동적해석을 수행하여 복층터널 중간슬래브의 동적거동을 분석하였다. 그 결과, 중간슬래브의 동적영향을 대표하는 동적확대계수는 탄성받침 지지조건 및 보통의 노면조도 조건에서 가장 크게 증폭되는 경향을 보였고, 양호한 노면조도와 강결연결 조건에 의해 동적영향을 작게 할 수 있음을 확인하였다.

• Composites Research
• /
• 제16권6호
• /
• pp.23-32
• /
• 2003

복합 신소재의 건설 분야 적용은 확대되고 있는 추세이고, 높은 비강도 비를 지닌 복합 신소재 교량 바닥 판의 개발은 국내외에서 활발히 진행되고 있다. 본 연구의 목적은 이동 하중을 받는 비등방성 복합재료 적층판의 동적 응답을 정식화하고, 유한요소법을 사용하여 적층에 따른 동적거동 특성을 분석하는 것이다. 수치 해석 모델에 대해서 이동하중의 속도를 증가시키면서 동적 확대 계수를 계산하였다. 또한 적층형식 및 순서, 섬유 보강 각도 등의 변화에 따른 동적 거동 특성을 분석하였다. 본 연구 프로그램의 타당성을 확보하기 위해 휨과 자유 진동 해석에 관한 기존 문헌 결과와 비교하여 검증하였다. 또한 이동 하중에 의한 동적 해석에 대해 모우드 중첩법과 Newmark 직접 적분법을 사용하였다. 이러한 이동 하중과 적층 수, 적층 순서 및 섬유 보강 각도에 따른 수치 해석 결과는 완전 복합 신소재 교량 바닥 판을 개발하는데 있어서 중요한 기초 자료로 제시될 수 있을 것이다.

• 한국강구조학회 논문집
• /
• 제12권4호통권47호
• /
• pp.407-416
• /
• 2000

본 연구는 실험적인 방법으로 이동하중을 받는 판형교의 동적 응답을 연구하였다. 판형교의 상부 슬래브는 판요소로, 거더는 보요소로 이상화였다. 이동하중과 판형교는 각각 소규모 차량모델과 교량모델로 제작하였다. 이동 하중을 받는 판형교의 동적 응답은 변형계, 변위계, 가속도계 및 변형도 측정기를 이용하여 측정하였고 측정한 자료로부터 얻은 최대동적응답을 유한요소법의 결과와 비교하였다. 실험적인 모형실험으로 판형교의 동적응답을 얻을 수 있음을 알 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.393-398
• /
• 2002

Rubber isolator has properties that can adjust easily stiffness and can be formed various shape. Also, it has high damping and is effective about structure-borne noise at high frequency range, So, rubber mount has widely used to isolate vibration at industrial equipment and construction field. However, rubber material is nonlinear and require enough consideration about shape factor whenever it is designed. The purpose of this paper is to develop conical rubber mount using compression and shear elasticity. The first, the dimension of mount is calculated by theoretical analysis considering design condition and static characteristics have been analyzed by FEM method. In addition, the fatigue test of rubber mount is performed to get reliability for product life and dynamic stiffness test is executed to get dynamic magnification factor. Finally, transmissibility test of vibration isolator has been carried out to suggest normal quantity data about vibration isolation.