• Journal of the Korean Ceramic Society
• /
• v.34 no.10
• /
• pp.1053-1059
• /
• 1997

The dynamic fatigue behavior of alumina ceramics was observed at room temperature using four point bending system. The dynamic fatigue fracture strength and the dynamic fatigue lifetime were observed as a function of crosshead speed and the notch length. The notched specimen showed the smaller deviation in dynamic fatigue fracture strength than the unnotched specimen. The crack growth exponent n and the material constant A of the notched specimen could be represented as functions of the notch length. Fracture strength of the specimen calculated from the notch length, when the notch length was regarded as the crack size, was in good agreement with the measured 4 point bending strength. Fracture surface of the specimen showed the different fracture modes according to the crosshead speed. The four point flexural strength, fracture toughness, Young's modulus and Weibull modulus of the alumina were measured as 360 MPa, 3.91 MPa.m1/2, 159GPa, 17.64, respectively.

• STI Policy Review
• /
• v.6 no.1
• /
• pp.1-23
• /
• 2015

Based on the work of Anand et al. (2013) we measure inclusive income growth, which combines growth in gross domestic product (GDP) per capita and growth in the equity of the income distribution. Extending the work of Causa et al. (2014), we estimate a dynamic simultaneous structural equations model of GDP per capita and inclusive income on panel data for 63 countries over the 1990-2013 period. We estimate both equations in error correction form by difference GMM (generalized method of moments). Among the explanatory variables of the level and the distribution of GDP per capita we include R&D (research and development) expenditure per capita. In OECD countries we obtain a large positive effect of R&D on GDP. R&D is found to have a positive effect on the social mobility index but its impact on the income equity index at first decreases, then switches around to become slightly positive in the long run. In non- OECD countries, R&D is found to decrease inclusive income, mostly through a negative growth effect but also because of a slightly increasing income inequity effect.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.90-99
• /
• 2023

This paper deals with studying strategy about impact of deep learning (DL) on the factor of Korean economic growth. To study classification of impact factors of Korean economic growth, we suggest dynamic equation of microeconomy and study methods on economic growth impact of deep learning. Next step is to suggest DL model to dynamic equation with Korean economy data with growth related factors to classify what factor is import and dominant factors to build policy and education. DL gives an influence in many areas because it can be implemented with ease as just normal editing works and speak including code development by using huge data. Currently, young generations will take a big impact on their job selection because generative AI can do well as much as humans can do it everywhere. Therefore, policy and education methods should be rearranged as new paradigm. However, government and officers do not understand well how it is serious in policy and education. This paper provides method of policy and education for AI education including generative AI through analysing many papers and reports, and experience.

• Transactions of Materials Processing
• /
• v.22 no.8
• /
• pp.450-455
• /
• 2013

In the current study, a new dynamic recrystallization model for predicting high temperature flow stress is developed based on a physical model and the mean field theory. In the model, the grain aggregate is assumed as a representative volume element to describe dynamic recrystallization. The flow stress and microstructure during dynamic recrystallization were calculated using three sub-models for work hardening, for nucleation and for growth. In the case of work hardening, a single parameter dislocation density model was used to calculate change of dislocation density and stress in the grains. For modeling nucleation, the nucleation criterion developed was based on the grain boundary bulge mechanism and a constant nucleation rate was assumed. Conventional rate theory was used for describing growth. The flow stress behavior of pure copper was investigated using the model and compared with experimental findings. Simulated results by cellular automata were used for validating the model.

• East Asian Economic Review
• /
• v.20 no.2
• /
• pp.229-275
• /
• 2016

We study the effect of the high-skilled emigration rate on the growth rate of the source countries. We incorporate the foreign direct investment and the policy variables into the panel model and also their interactions with the high-skilled emigration rate, as they are related to the network externality that may be created by the high-skilled emigrants working abroad. We apply the static fixed-effects model and compare it with the results obtained in the dynamic panel model with system generalized methods of moments estimators. We find the negative effect of the high-skilled emigration rate by itself and in its interaction with the foreign direct investment only in the dynamic model. However, we find positive coefficient for the interaction of the high-skilled emigration rate and the civil liberties index, which holds across the static and dynamic specifications. This implies that the effect of the high-skilled emigration rate on the growth rate of the source countries can be positive, and the extent is larger for countries with 'poor' civil liberties. The developing countries with low levels of foreign direct investment inflows and 'poor' civil liberties can best benefit from the high levels of skilled emigration outward. Through finding significant interactions with other variables, we confirm that the high-skilled emigration should be considered along with other related variables in measuring its impact on growth. The implications offer suggestions for the international trade and aid policies.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.266-278
• /
• 2012

The objective of this study was developing dynamic stand growth model to predict diameter at breast height (DBH) growth by thinning intensity and cycle for major tree species of South Korea. The yield table, one of static stand growth models, constructed by Korea Forest Service was employed to prepare dynamic stand growth models for 8 tree species. In the process of model development, the thinning type was designated to thinning from below and equations for predicting the DBH change after thinning by different intensities was generated. In addition, stand density (N/ha), age and site index were adopted as explanatory variables for DBH prediction model. Thereafter, using the model, DBH growth under various silvicuture through integrating such equations considering thinning intensities, and cycles. The dynamic stand growth model of DBH developed in this study can provide understanding of effectiveness in forest growth and growing stock when thinning practice is performed in forest. Furthermore, results of this study is also applicable to quantitatively assess the carbon storage sequestration capability.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 2004.05a
• /
• pp.316-335
• /
• 2004

This paper builds a system dynamics model analyzing first mover effect and growth strategy of online retailer, a major segment of B2C e-commerce. The dynamic model in this paper is calibrated to the online book market and Yes24.com as major test cases. The model consists of eight key value chain sectors. Five of these(Users, Site Operations, Human Resources, Financial Accounting, and Fundraising) are internal to the company, and three others(Market, Financial Market, and Relative Performance) are external to the company. With the model, this paper suggests research propositions representing positive feedback loops and negative feedback loops that lead to corporate growth and limits to growth according to dynamic causal relationships among eight key value chain sectors, and simulate these propositions.

• The Journal of Information Systems
• /
• v.33 no.2
• /
• pp.143-168
• /
• 2024

Purpose This study highlights the crucial role of external APIs in driving dynamic evolution within a digital ecosystem. Drawing on the concept of evolutionary network biology perspective, this study hypothesizes that APIs' (non)network properties can significantly impact a digital ecosystem's product variety. Design/methodology/approach This study analyzes plug-in source code data from WordPress.org between January 2004 and December 2014, using survival analysis to test this hypothesis. Findings The empirical results demonstrate that external APIs have a more significant impact on promoting ecosystem evolution over time than those offered by a focal platform system. This research enhances our understanding of ecosystem dynamics and emphasizes the critical role of the generative nature of APIs in fostering ecosystem growth.

• Journal of Biosystems Engineering
• /
• v.24 no.5
• /
• pp.445-452
• /
• 1999

This study was conducted to develop a searching algorithm for optimal daily temperature setpoint greenhouse. An algorithm using crop growth and energy models was developed to determine optimum crop growth environment. The results of this study were as follows: 1. Mathematical models for crop growth and energy consumption were derived to define optimal daily temperature setpoint. 2. Optimum temperature setpoint, which could maximize performance criterion, was determined by using Pontryagin maximum principle. 3. Dynamic control of daily temperature using the developed algorithm showed higher performance criterion than static control with fixed temperature setpoint. Performance criteria for dynamic control models were with simulated periodic weather data and with real weather data, increased by 48% and 60%, respectively.

• Korean Management Science Review
• /
• v.32 no.2
• /
• pp.91-109
• /
• 2015

The M&A of firms has been emerged as the effective means of fast diversification and growth in dynamic environment. However, the empirical research about M&A in Korea has not been implemented rich due to the difficulty of obtaining M&A data. In this research, we empirically investigate the relationships among M&A, environment and firms' performance focused on Korean manufacturing firms, understanding the current practice of M&A in Korea. We use the Manufacturing Productivity Panel Survey Data, which are collected by Korea Productivity Center in 2013. The sample size is 575 and the sample is divided into M&A group and non-M&A group. We conduct logit analysis with the independent variables of environment factors (munificence, dynamic, uncertainty), and firms' performance (sales growth, ROS, labor productivity and Inventory turnover), and dependent variable of M&A group or non M&A group. The results show that M&A is closely related to environment feature and firm performance: M&A firms are likely to be the higher munificence and dynamic and the lower sales growth and higher profitability than non-M&A group. In addition, we also examine the characteristics of firms by M&A types (competitors, customer/supplier and firms from unrelated industry). These results imply that if firms confront the pressure of uncertainty (dynamic) and the lower growth, they tend to choose M&A. Futhermore, to profoundly understand the behavior of firms about M&A, it is required to classify the M&A firms by merge types.