• Journal of radiological science and technology
• /
• 제36권4호
• /
• pp.291-297
• /
• 2013

This study is aimed to evaluate the effect of $T_{1/2}$ upon count rates in the analysis of dynamic scan using NaI (Tl) scintillation camera, and suggest a new quality control method with this effects. We producted a point source with $^{99m}TcO_4^-$ of 18.5 to 185 MBq in the 2 mL syringes, and acquired 30 frames of dynamic images with 10 to 60 seconds each using Infinia gamma camera (GE, USA). In the second experiment, 90 frames of dynamic images were acquired from 74 MBq point source by 5 gamma cameras (Infinia 2, Forte 2, Argus 1). There were not significant differences in average count rates of the sources with 18.5 to 92.5 MBq in the analysis of 10 to 60 seconds/frame with 10 seconds interval in the first experiment (p>0.05). But there were significantly low average count rates with the sources over 111 MBq activity at 60 seconds/frame (p<0.01). According to the second analysis results of linear regression by count rates of 5 gamma cameras those were acquired during 90 minutes, counting efficiency of fourth gamma camera was most low as 0.0064%, and gradient and coefficient of variation was high as 0.0042 and 0.229 each. We could not find abnormal fluctuation in $x^2$ test with count rates (p>0.02), and we could find the homogeneity of variance in Levene's F-test among the gamma cameras (p>0.05). At the correlation analysis, there was only correlation between counting efficiency and gradient as significant negative correlation (r=-0.90, p<0.05). Lastly, according to the results of calculation of $T_{1/2}$ error from change of gradient with -0.25% to +0.25%, if $T_{1/2}$ is relatively long, or gradient is high, the error increase relationally. When estimate the value of 4th camera which has highest gradient from the above mentioned result, we could not see $T_{1/2}$ error within 60 minutes at that value. In conclusion, it is necessary for the scintillation gamma camera in medical field to manage hard for the quality of radiation measurement. Especially, we found a tendency that count rate changes over time at this study, and we proved that it can effect $T_{1/2}$. And also, there is need of appropriate phantoms and the method of quality management like this study, because there are not any advice or limitation degrees for domestic medical purpose scintillation camera.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제37권3호
• /
• pp.163-173
• /
• 2001

The dynamic behavior characteristics of a small fishing crane for inshore and coastal fishing vessels was experimentally analyzed in order to improve the fishing operation and to reduce considerably manual work of fisherman. The small fishing crane was designed to be controlled electro-hydraulically by means of proportional valves and solenoid valves, and also to be controlled the speed of each operation. The dynamic behavior characteristics was investigated by measuring the changes of parameters such as oil pressure, swing angle of load, load tension, the lifting angle and the swing angle of crane arm when the arms extended in a side way was given a test load. The results obtained are summarized as follows: 1. The designed small fishing crane can be proportionally controlled by means of proportional valves and rapidly by operating the solenoid valves, respectively. The capacity, turning angle, maximum reach of crane were 2 T-M, $180^\circ$, 3.7m, respectively. 2. The vertical change of crane arm on the extension of lifting cylinder was $1.2^\circ$/cm, and the swing speed of crane arm due to the extension of swing cylinder by on/off operations of solenoid valves was $15^\circ$/sec, with the swing period of 1.4 sec and the angle fluctuation of $\pm$11.0$^{\circ}$. 3. When changing simultaneously the horizontal and vertical positions of the lifting load by on/off operations of solenoid valves, the swing and lifting speeds of crane arm were $4.46^\circ$/sec and $6.4^\circ$/sec, respectively. 4. The movements of the designed crane were particularly smooth as they are controlled with the aid of proportional valves than by means of solenoid valves.

• Environmental and Resource Economics Review
• /
• 제13권4호
• /
• pp.593-619
• /
• 2004

This study analyzes the interfuel substitution of energy demand in Korean manufacturing sector using static and dynamic linear logit models. For the period of 1981~2002, this study uses petroleum, electricity, natural gas and coal as energy sources. According to the empirical results, firstly, the own-price elasticity of coal has been increased steadily even though its elasticity is smallest compared with those of other energy sources. On the other hand, price elasticity of natural gas is largest, but its value has been decreased after 1997. Price elasticities of petroleum and electricity are very stable over the sample period. One of the main features in trends of interfuel substitution is as follows. Substitution effect of a change in price of natural gas on both petroleum and coal has been increased especially after 1997. The implication of the empirical results is summarized as follows: First, the fact of inelastic own-price elasticity of petroleum implies that the dependency of Korean manufacturing sector on petroleum and coal will be persistent even in a sharp fluctuation of petroleum price. Second, the effects of price increase in natural gas on demand for petroleum and coal are very significant. Thus, price decline of natural gas rather than price declines of coal and petroleum could be more effective as an energy price policy for the reduction of $CO_2$ emission. The assessment on this implication will remain for future researches.

• Journal of Korea Water Resources Association
• /
• 제40권4호
• /
• pp.325-334
• /
• 2007

In this study, a long-term unsteady simulation model has been developed using rigid water column theory which is more accurate than Extended-period model and more efficient comparing with water-hammer simulation model. The developed model is applied to 24-hours unsteady simulation considering daily water-demand and water-hammer analysis caused by closing a valve. For the case of 24-hours daily simulation, the pressure of each node decreases as the water demand increase, and when the water demand decrease, the pressure increases. During the simulation, the amplitudes of flow and pressure variation are different in each node and the pattern of flow variation as well as water demand is quite different than that of KYPIPE2. Such discrepancy necessitates the development of unsteady flow analysis model in water distribution network system. When the model is applied to water-hammer analysis, the pressure and flow variation occurred simultaneously through the entire network system by neglecting the compressibility of water. Although water-hammer model shows the lag of travel time due to fluid elasticity, in the aspect of pressure and flow fluctuation, the trend of overall variation and quantity of the result are similar to that of water-hammer model. This model is expected for the analysis of gradual long-term unsteady flow variations providing computational accuracy and efficiency as well as identifying pollutant dispersion, pressure control, leakage reduction corresponding to flow-demand pattern, and management of long-term pipeline net work systems related with flowrate and pressure variation in pipeline network systems

• Journal of the Korean Institute of Landscape Architecture
• /
• 제37권6호
• /
• pp.96-105
• /
• 2010

This study identified the dynamic process of sandbar and vegetation distribution of the sandbar on the Tan-cheon River. The study area is located in the lower reaches of the Tan-cheon River that has been managed as an Ecosystem Reserve Area since 2002. For the study, the geomorphological process was analyzed through mapping analysis using a satellite image followed by analysis of the vegetation distribution through an on-site survey. The major findings were as follows : First, In the fluvial geomorphic process, various kinds of sandbars were developed in 1990s, the morphologic characteristics changing continuously. Second, In the distribution of vegetation on the sandbar, the sandbar shore was covered with bare sand substrate or intermittent annual vegetation because of the periodic fluctuation of the water-level due to intensive disturbances. Third, In the relationship between the sandbar formation and vegetation, four types of sandbars were classified: channel-shore stable bar, channel-shore unstable bar, mid-channel stable bar and mid-channel unstable bar, according to the fluvial disturbance & vegetation process. The study verifies that the vegetation distribution is reciprocally related to the geomorphological process. Accordingly, it is meaningful in the selection of plant species and the planting area of the sand bar. However, it is limited to the planting guidelines on river restoration projects. More diverse on-site experimental studies should be conducted.

• Journal of the Korean Institute of Navigation
• /
• 제23권1호
• /
• pp.75-84
• /
• 1999

Although many studies on modelling of port competitive situation have been conducted, both theoretical frame and methodology are still very weak. In this study, therefore, a new algorithm called ESD (Extensional System Dynamics) for the evaluation of port competition was presented, and applied to simulate port systems in northeast asia. The detailed objectives of this paper are to develop Unit fort Model by using SD(System Dynamics) method; to develop Competitive Port Model by ESD method; to perform sensitivity analysis by altering parameters, and to propose port development strategies. For these the algorithm for the evaluation of part's competition was developed in two steps. Firstly, SD method was adopted to develop the Unit Port models, and secondly HFP(Hierarchical Fuzzy Process) method was introduced to expand previous SD method. The proposed models were then developed and applied to the five ports - Pusan, Kobe, Yokohama, Kaoshiung, Keelung - with real data on each ports, and several findings were derived. Firstly, the extraction of factors for Unit Port was accomplished by consultation of experts such as research worker, professor, research fellows related to harbor, and expert group, and finally, five factor groups - location, facility, service, cargo volumes, and port charge - were obtained. Secondly, system's structure consisting of feedback loop was found easily by location of representative and detailed factors on keyword network of STGB map. Using these keyword network, feedback loop was found. Thirdly, for the target year of 2003, the simulation for Pusan port revealed that liner's number would be increased from 829 ships to 1,450 ships and container cargo volumes increased from 4.56 million TEU to 7.74 million TEU. It also revealed that because of increased liners and container cargo volumes, length of berth should be expanded from 2,162m to 4,729m. This berth expansion was resulted in the decrease of congested ship's number from 97 to 11. It was also found that port's charge had a fluctuation. Results of simulation for Kobe, Yokohama, Kaoshiung, Keelung in northeast asia were also acquired. Finally, the inter port competition models developed by ESB method were used to simulate container cargo volumes for Pusan port. The results revealed that under competitive situation container cargo volume was smaller than non-competitive situation, which means Pusan port is lack of competitive power to other ports. Developed models in this study were then applied to estimate change of container cargo volumes in competitive relation by altering several parameters. And, the results were found to be very helpful for port mangers who are in charge of planning of port development.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제30권10A호
• /
• pp.886-895
• /
• 2005

As the networked media technology have been grown in recent, there have been many research works to deliver high-quality video such as HDV and HDTV over the Internet. To realize high-quality media service over the Internet, however, the network adaptive streaming scheme is required to adopt to the dynamic fluctuation of underlying networks. In this paper, we design and implement the network-adaptive HD(high definition) MPEG-2 streaming system employing the frame-based prioritized packetization. Delivered video is inputted from the JVC HDV camera to the streaming sewer in real-time. It has a bit-rate of 19.2 Mbps and is multiplexed to the MPEG-2 TS (MPEG-2 MP@HL). For the monitoring of network status, the packet loss rate and the average jitter are measured by using parsing of RTP packet header in the streaming client and they are sent to the streaming server periodically The network adaptation manager in the streaming server estimates the current network status from feedback packets and adaptively adjusts the sending rate by frame dropping. For this, we propose the real-time parsing and the frame-based prioritized packetization of the TS packet. The proposed system is implemented in software and evaluated over the LAN testbed. The experimental results show that the proposed system can enhance the end-to-end QoS of HD video streaming over the best-effort network.

• Korean Journal of Environmental Biology
• /
• 제34권1호
• /
• pp.56-62
• /
• 2016

Pest population density models are very important to monitor the initial occurrence and to understand the continuous fluctuation pattern of pest in pest management. This is one of the major issues in agriculture because these predictions make pesticides more effective and environmental impact of pesticides less. In this study, we combined and predicted the mortality change of pest caused by pesticides with temperature change and population dynamic model. Sensitive strain of two-spotted spider mite (Tetranychus urticae Koch) with kidney bean leaf as host was exposed to mixed acaricide, Acrinathrin-Spiromesifen and organotin acaricide, Azocyclotin, at 20, 25, 30, and $35^{\circ}C$, respectively. There was significant difference in mortality of T. urticae among pesticides and temperatures. We used DYMEX to simulate population density of T. urticae and predicted that the initial management time and number of chemical control would be changed in the future with climate change. There would be implications for strategies for pest management and selection process of pesticide in the future corresponding climate change.

• Journal of the Society of Naval Architects of Korea
• /
• 제33권3호
• /
• pp.35-47
• /
• 1996

A surface panel method treating a boundary-value problem of the Dirichlet type is presented to design a three dimensional body with free surface corresponding to a prescribed pressure distribution. An integral equation is derived from Green's theorem, giving a relation between total potential of known strength and the unknown local flux. Upon discretization, a system of linear simultaneous equations is formed including free surface boundary condition and is solved for an assumed geometry. The pseudo local flux, present due to the incorrect positioning of the assumed geometry, plays a role f the geometry corrector, with which the new geometry is computed for the next iteration. Sample designs for submerged spheroids and Wigley hull and carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. For the calculation of the wave resistance, normal dipoles and Rankine sources are distributed on the body surface and Rankine sources on the free surface. The free surface boundary condition is linearized with respect to the oncoming flow. Four-points upwind finite difference scheme is used to compute the free surface boundary condition. A hyperboloidal panel is adopted to represent the hull surface, which can compensate the defects of the low-order panel method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but by experiment.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제9권2호
• /
• pp.58-67
• /
• 1995

The paper describes the variation of magnetic fields caused by the operation of induction motors. The measuring system consists of the self-integrating magnetic field sensor, amplifier, and active integrator. From the calibration experiments, the frequency bandwidth of the magnetic field measuring system ranges from 20[Hz] to 300[kHz] and sensitivity is 0.234(mV/$\mu\textrm{T}$]. The magnetic fields generated under steady state and starting operations of duction motor are recorded by the proposed measuring system, and the fast Fourier transformation(FFT) of the measured data is performed to analyze the harmonic components. A single pulsed magnetic field is strongly caused by direct starting the induction motor, and its peak value is greater than 5 times as compared with the steady state value. The long transient duration and high intensity originates from the large inductance and dynamic characteristic of the induction motor, During the steady state operation of induction motor, subharmonics of magnetic field components, which depend on the pole number of induction motor, are observed. The lower order power-line harmonics can be inferred from the voltage flicker and current ripple which are derived from the torque fluctuation of induction motor. In the case of the induction motor drived by inverter, the harmonics of magnetic field are much more than those caused by direct starting method and are found generally to increase with decreasing the driving frequency.