• 한국농공학회지
• /
• 제44권4호
• /
• pp.114-122
• /
• 2002

Up to now, many constitutive models for clay have been proposed and studied based on the elasto-plastic or elasto-viscoplastic theory and it has been recognized that the effect of time on the loading process is a salient feature. In the present study, cyclic behavior characteristics of clay was studied with a viscoelastic-viscoplastic constitutive model for clay based on the non-linear kinematic hardening rule. In order to examine the behavior of clay several cyclic untrained triaxial tests and also their numerical simulations were performed. As results of that, it was found that the proposed model can well describe cyclic behaviors of clay such as frequency dependent characteristics, and have the high feasibility of numerical simulation for dynamic analysis.

• 한국시뮬레이션학회논문지
• /
• 제13권4호
• /
• pp.55-69
• /
• 2004

In MANET(Mobile Ad-hoc Network), unlike in wired networks, a path configuration should be in advance of data transmission along a routing path. Frequent movement of mobile nodes, however, makes it difficult to maintain the configured path and requires re-configuration of the path very often. It may also leads to serious problems such as deterioration of QoS in mobile ad-hoc networks. In this paper, we proposed a Reactive Routing Keyword (RRK) routing procedure to solve those problems. Firstly, we noticed it is possible in RRK routing to assign multiple routing paths to the destination node. We applied this feature into active networks and SNMP information based routing by storing unique keywords in cache of mobile nodes corresponding to present and candidate routings in a path configuration procedure. It was shown that the deterioration of QoS which may observed in Dynamic Source Routing(DSR) protocol was greatly mitigated by using the proposed routing technique.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.188-198
• /
• 1994

The distributed arithmetic approach has been commonly recognized as an efficient method to implement the inner-product type of computation with fixed coefficients such as DCT/IDCT. This paper presents a novel architecture and the implementation of 2-D DCT/IDCT VLSI chip based on distributed arithmetic. The main feature of the proposed architecture is a fully 2-bit serial pipeline and parallel structure with memory-based signal processing circuitry, which is efficient to the implementation of the bit-serial operation of distributed arithmetic. All modules of the proposed architecture are designed with NP-dynamic circuitry to reduce the power consumption and to increase the performance. This chip is applicable in HDTV systems working at video sampling rate up to 75 MHz.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.837-838
• /
• 2006

This paper proposes a method of assembling parts using visual servoing in dynamic environment. We use SSD(Sum of Square Difference) based on adaptive template in order to detect a moving object in the case where the robot and the object both move. And the control input of the robot is obtained from the feed-back signal of the feature movement and the feed-forward signal of the camera movement in image plane.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권1호
• /
• pp.34-42
• /
• 2013

Human faces have been broadly studied in digital image and video processing fields. An appearance-based method, the adaptive boosting learning algorithm using integral image representations has been successfully employed for face detection, taking advantage of the feature extraction's low computational complexity. In this paper, we propose a face-detection postprocessing method that equalizes instantaneous facial regions in an efficient hardware architecture for use in real-time multimedia applications. The proposed system requires low hardware resources and exhibits robust performance in terms of the movements, zooming, and classification of faces. A series of experimental results obtained using video sequences collected under dynamic conditions are discussed.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.217-221
• /
• 2002

In this paper, we propose a new scheme of motion tracking based on fuzzy inference (FI)and wavelet transform (WT) from image sequences. First, we present a WT to segment a feature extraction of dynamic image . The coefficient matrix for 2-level DWT tent to be clustered around the location of important features in the images, such as edge discontinuities, peaks, and corners. But these features are time varying owing to the environment conditions. Second, to reduce the spatio-temporal error, We develop a fuzzy inference algorithm. Some experiments are peformed to testify the validity and applicability of the proposed system. As a result, proposed method is relatively simple compared with the traditional space domain method. It is also well suited for motion tracking under the conditions of variation of illumination.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.31-39
• /
• 2013

The conventional non-isolated boost converter has some drawbacks such as poor dynamic performance and a discontinuous output current, which make it unsuitable for battery charging applications. In spite of its compactness and lightness, it is not preferred as a charger of portable electronic devices. In this paper, a non-isolated boost converter topology for Li-ion batteries suitable for fuel cell powered laptop computers is proposed and analyzed. The proposed converter has an additional inductor at the output to make a continuous output current. This feature makes it suitable for charger applications by eliminating the disadvantages of the conventional non-isolated boost converter mentioned above. A prototype of the proposed converter is built for the Li-ion battery charger of a laptop computer to prove the validity and advantages of the proposed topology.

• 대한전기학회논문지
• /
• 제38권9호
• /
• pp.671-683
• /
• 1989

A controller of interconnected power systems is investigated using an optimal multidimensional variable structure control. The switching hyperplane of the variable structure stabilizer is obtained by minimizing a quadratic performance index in continuous-time. A special feature of the optimal multidimensional variable structure stabilizer is that, when it is operated in the so-called sliding mode, the system response becomes insensitive to changes in the plant parameters. A digital simulation is performed by a digital computer using the Advanced Continuous Simulation Language (ACSL) package, which shows that the dynamic performance of the power system in response to mechanical torque changes is improved when optimal multidimensional variable sturcture stabilizers are employed.

• 전기학회논문지P
• /
• 제54권2호
• /
• pp.101-107
• /
• 2005

The reduced power quality due to some of disturbances on power system has great influence on the efficient and life of load for bad with serious economic loss. The response of load about disturbance needs to analysis quantitatively in detail to improve load characteristics. In this research, a power supply device is developed to supply disturbed power similar to that of power system. The developed device can output a voltage and frequency from 180[V] to 240[V], 55[Hz] to 65[Hz] respectively. The most outstanding feature of this device is a function to be performed steady and dynamic state characteristic experiment on load or appliances. Also, this device is designed to include high accuracy ouput and simple measurement.

• Journal of Information Technology Applications and Management
• /
• 제20권2호
• /
• pp.177-191
• /
• 2013

Social network has been expected to increase the value of social capital through online user interactions which remove geographical boundary. However, online users in social networks face challenges of assessing whether the anonymous user and his/her providing information are reliable or not because of limited experiences with a small number of users. Therefore. it is vital to provide a successful trust model which builds and maintains a web of trust. This study aims to propose a prediction method for the interpersonal trust which measures the level of trust about information provider in Facebook. To develop the prediction method. we first investigated behavioral research for trust in social science and extracted 5 antecedents of trust : lenience, ability, steadiness, intimacy, and similarity. Then we measured the antecedents from the history of interactive behavior and built prediction models using the two decision trees and a computational model. We also applied the proposed method to predict interpersonal trust between Facebook users and evaluated the prediction accuracy. The predicted trust metric has dynamic feature which can be adjusted over time according to the interaction between two users.