• Journal of KIISE:Software and Applications
• /
• v.37 no.7
• /
• pp.584-589
• /
• 2010

The dynamic time warping algorithm generally used in time series pattern recognition spends most of the time in generating the correlation table, and it establishes the global path constraint to reduce the corresponding time complexity. However, the constraint restrains just in terms of the time axis, not considering the contents of input patterns. In this paper, we therefore propose an efficient branch and bound dynamic time warping algorithm which sets the global constraints by adaptively reflecting the patterns. The experimental results show that the proposed method outperforms conventional methods in terms of the speed and accuracy.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.4 no.2
• /
• pp.20-28
• /
• 2008

According to IAEA regulations, a transportation package of radioactive material should perform its intended function of containing the radioactive contents after the drop test, which is one of hypothetical accident conditions. Impact limiters attached to a transport cask absorb the most of impact energy. So, it is appreciated to determine properly the shape, size and material of impact limiters. A material data needed in this determination is a dynamic one. In this study, several materials considered as those of impact limiters were tested by a drop weight facility to acquire dynamic material characteristics data. Impact absorbing volume of the impact limiter was derived mathematically for each drop condition. A size optimization of impact limiter was conducted. The derived impact absorbing volumes were applied as constraints. These volumes should be less than critical volumes generated based on the dynamic material characteristics. The derived procedure to decide the shape of impact limiter can be useful at the preliminary design stage when the transportation package's outline is roughly determined and applied as input value.

• Journal of Digital Convergence
• /
• v.6 no.1
• /
• pp.53-61
• /
• 2008

For the domestic digital contents, a proactive cooperation system or framework between the government, the businesses and research institutions, which would allow for free flow of interaction among these players, can play that role. We have proposed and realized the Dynamic Coordinating Framework(DCF) to bridge these gaps among the major players in the industry. The the Dynamic Coordinating Framework rests on the following major functions. The first major function of the DCF is to decipher any ambiguity that may be embedded in external inputs by stratified role and bias. The second function is to create cooperative groups that will deal with the ambiguities based on its consequent situation. The third is a feedback function that will draw out a new cooperative way by re-feeding the capacities and the conflicts that stem from the existing organizations and strategies into cooperation and adjustment process. Our DCF has compared and evaluated with England and Australia digital content industry models under AHP(Analytic Hierarchy Process) method. DCF has turned out to be well designed and have strong points based on OECD innovation and cooperation criteria.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.10
• /
• pp.27-35
• /
• 2018

In this paper, a fundamental study for developing and introducing a new assessment method of the 'Energy Performance' in G-SEED that uses dynamic building energy simulations was conducted by comparing and analyzing the corresponding issues of domestic and foreign green building certification systems. The most significant part of the new assessment method to be developed was a development of a modeling guideline for a reference building using dynamic building energy simulations. In this paper, the composition and detailed contents of the guideline was created to comply with domestic energy codes. In addition, one of the most influential part of the result in the simulations, the 24-hour building operation schedule for a reference building, was created considering the equity with the ECO2 program that is the evaluation tool of one of the current assessment methods in the "Energy Performance". In order to improve the completeness of this guideline, it is necessary to continue the process of supplementation in the future, however, this paper is expected to be of great significance as the beginning of the research.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.6
• /
• pp.5-21
• /
• 2014

It has been pointed out that the collapses of unsaturated road embankments caused by earthquake are attributed to high water content caused by the seepage of the underground water and/or the rainfall infiltration. Hence, it is important to study influences of water content on the dynamic stability and deformation mode of unsaturated road embankments for development of a proper design scheme including an effective reinforcement to prevent severe damage. This study demonstrates dynamic centrifugal model tests with different water contents to investigate the effect of water content on deformation and failure behaviors of unsaturated road embankments. Based on the measurement of displacement, the pore water pressure and the acceleration during dynamic loading, dynamic behavior of the unsaturated road embankments with about optimum water content and the higher water content than the optimum one have been examined. In addition, an image analysis has revealed the displacement field and the distributions of strains in the road embankment, by which deformation mode of the road embankment with higher water content has been clarified. It has been confirmed that in the case of higher water content the settlement of the crown is large mainly owing to the volume compression underneath the crown, while the small confining pressure at the toe and near the slope surface induces large shear deformation with volume expansion.

• Food Science and Biotechnology
• /
• v.17 no.1
• /
• pp.90-94
• /
• 2008

Dynamic rheological properties of honey samples with 3 different moisture contents (17.2, 19.0, and 21.0%) were evaluated at various low temperatures (-15, -10, -5, and $0^{\circ}C$) using a controlled stress rheometer. The honey samples displayed a liquid-like behavior, with loss modulus (G") predominating over storage modulus (G') (G">>G'), showing the high dependence on frequency ($\omega$). The magnitudes of G' and G" decreased with an increase in temperature and water content while a predominant increase of G' was noticed at $-15^{\circ}C$. The time-temperature superposition (TTS) principle was applied to bring G" values for honeys at various temperatures together into a master curve. The G" over the temperature range of -15 to $0^{\circ}C$ obeyed the Arrhenius relationship with a high determination coefficient ($R^2=0.98-0.99$). Activation energy value (Ea=112.4 kJ/mol) of honey with a moisture content of 17.2% was higher than those (Ea=98.8-101.1 kJ/mol) of other honey samples with higher moisture contents.

• Journal of Digital Convergence
• /
• v.10 no.2
• /
• pp.171-182
• /
• 2012

The many companies and developers develop new mobile applications for serving to users. But, most of it is disappeared in a brief. Because Many applications weren't satisfy the needs of user. In this paper, it analysis to reason short life of mobile application in the smart terminals and mobile applications. Therefore, we develop dynamic user usability analysis system of applications to solve the problem. User usability analysis method is surveyed users and masters at present and then occurs high cost. In this paper, we develop dynamic user usability analysis system for real users. If usage of mobile applications upgrading, benefit of developers increased and serviced target contents to users.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.239-246
• /
• 2000

It has been generally much fine contents in West Coast of Korea. When cyclic shear stress causing liquefaction was estimated as using cyclic triaxial tests in these grounds, it didn't appear linear relations between deviator stress and confining stress where σ'₃ was more than 150 kpa. Namely, due to no normalization of cyclic shear stress ratio, the errors of this is increased. Therefore, more confining stress is increased, more increment of deviator stress is decreased. So, using linear relations between tanø'/sub d/ of dynamic internal friction angle and CSR where σ'₃ was less than 150 kpa, liquefaction of these grounds was evaluated. Also, as doing detail evaluation which had carried response analysis of earthquake, this appeared good results which was well compatible with empirical methods using N-value of SPT. It was thought that these result evaluated vulnerable liquefaction area more correct than existing methods. Also, characteristics of liquefaction in West Coast grounds was compared with clean sands, with analysis of behavior of pore pressure ratio and axial strain affected by fine contents, as cyclic loading was applied.

• The Journal of the Korea Contents Association
• /
• v.14 no.1
• /
• pp.14-23
• /
• 2014

There have been many researches for XML as the international standard to store and exchange data on the internet. Among these research fields, we focus on the techniques labeling the nodes of the XML tree that is required for querying the structural information. A labeling scheme assigns the unique label to the nodes and supports the queries for the structural information such as Ancestor-Descendant and Parent-Child relationships. In this paper, we propose a labeling scheme using vector representation where the assigned labels are not altered although XML documents are changed dynamically. Our labeling scheme reduces the storage requirement for the labels of the XML tree and provides the efficient query by using the fixed-length labels with a short size. Result of performance evaluation shows that our labeling scheme is superior to the previous approaches.

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.115-121
• /
• 2013

Recently an extension to DMB AF (Digital Multimedia Broadcasting Application Format) standard has been proposed in such a way that the extended DMB AF can include stereoscopic video and stereoscopic images for interactive service data, i.e., MPEG-4 BIFS (Binary Format for Scene) data, in addition to the existing 2D video and 2D images for BIFS services. In this paper we developed a service that provides the streaming of 3D contents in DMB AF by using MPEG-DASH (Dynamic Adaptive Streaming over HTTP) standard and validated it by implementing the client software.