• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.62-68
• /
• 2017

Coffee sludge and onion shells are known typically as waste resources as well as simultaneously being the raw material for dye having a golden brown color. This research studies the dyeability, functionality, and colors of woolen fabric after being dyed by different dyeing method using coffee sludge and onion shells extract. The woolen fabric was refined and pre-mordanted with tannin. The dyeing process conducted was single-dye, using coffee sludge and onion shells extract, sequential multi-dye, consecutively dyeing with coffee sludge and onion shells, and mixed-dye, blending coffee sludge extract and onion shells extract to dye. The dyeing was measured on the surface color, color fastness, and UV-protection ability. As a result, the expression of various hues of tan using coffee sludge and onion shells extract were shown to be possible. Additionally, single-dye, sequential multi-dye, mixed-dye had generally superiority in color fastness to light, all rating 3 and color fastness to washing, rating 3 or 4, showing relatively stable color fastness to washing. The UV protection ability was shown to be better, especially appearing satisfactory in the UV-B protection, all measured to be over 90%.

• 한국방재안전학회논문집
• /
• 제10권1호
• /
• pp.55-60
• /
• 2017

슬러지를 매립하는 경우 빗물의 유입이나 주변 지하수의 수분을 흡수하여 지반이 전체적으로 연약해 지는 경우가 발생한다. 본 연구에서는 탈수한 염색슬러지를 매립한 경우의 문제점을 확인하기 위해 염색슬러지와 염색슬러지-토사 혼합샘플에 대한 시험을 수행하였다. 염색슬러지가 배수가 원활하지 못한 매립지 내부에서 함수비가 높은 상태로 장기간 방치되면, 염색공장의 염색슬러지와 비교하여 투수성이 약 3/100 수준으로 낮아지고 압축성이 1.4배 증가하는 것으로 나타났다. 매립지의 안정성 확보를 위해 매립지 내부 함수비를 저하시키는 것이 중요하며, 배수로의 확보와 침출수 배제시설을 통한 관리가 필요할 것으로 판단된다.

• 산업기술연구
• /
• 제29권B호
• /
• pp.89-94
• /
• 2009

The dyeing sludge is the major waste generated in Banwol & Sihwa Industrial Complex. The Purpose of this study is to develop BAT (Best available technique) for the treatment and recycling of dyeing sludge. The dyeing sludge was carbonized and the product was tested physical properties and chemical chracterizations and also analyzed chemical compositions. From the test results we expect that the products can be used as adsorbent for the removal of order in the poultry farm and cattle shed. The feasibility of other methods such as manufature of RDF and cement etc. were also studied.

• 한국염색가공학회지
• /
• 제10권6호
• /
• pp.42-48
• /
• 1998

For the effective operation of complex dyeing wastewater treatment plant, the biodegradability of various dyeing agents were investigated. For experiments in biodegradability, activated sludge from aeration tank of wastewater treatment plant was used. Biodegradability of dyeing agents were compared by measuring the $BOD_5/COD_{Cr}$ ratios and $BOD_5$ removal efficiency. $COD_{Cr}$. removal efficiency of dyeing agents was less than 80% , while $BOD_5$ removal efficiency was less than 60% after of days. Therefore, biodegradation by activated sludge were found very difficult. Judging from this, it is necessary to isolate strains biodegrading dyeing agents in order to operate activated sludge process safely.

• 한국건설순환자원학회논문집
• /
• 제4권4호
• /
• pp.425-430
• /
• 2016

산업의 급격한 발달과 함께 사회 또한 급격한 발달을 이루면서 전 세계는 편리한 생활을 이룰 수 있게 되었다. 하지만 이러한 산업의 발달의 이면에는 환경오염으로 인한 지구온난화와 산업부산물 대량 발생 등의 문제가 발생하고 있는 실정이다. 이에 본 연구는 건축분야에서 $CO_2$ 배출 비율이 높은 시멘트의 사용량을 줄이고자 산업부산물인 고로슬래그와 순환 유동층 연소 플라이애시를 사용하였으며, 국내 염색공단에서 배출되고 있는 20만 톤 이상의 슬러지를 재활용하는 방안을 검토하기 위해 염색슬러지 탄화물을 활용한 무시멘트 경화체의 특성에 대한 기초자료를 제시하고자 하였다. 그 결과, 염색슬러지 탄화물의 치환율이 증가함에 따라 공기량은 증가하였고 플로어는 증가하였다. 또한 염색슬러지 탄화물 치환율이 증가함에 따라 휨강도 및 압축강도는 감소하는 경향을 보였다.

• 한국환경보건학회지
• /
• 제30권2호
• /
• pp.167-172
• /
• 2004

In this study, we carried out the research for the recycling potential of the dyeing wastewater treatment sludges as construction materials. The incineration ash of sludges were solidified as interlocking block in condition of sludge/cement ratio 2.5%, 5.0% and 10%, respectively. Those interlocking blocks were cured for 3days, 7days and 28days in ambient air condition, respectively. The results of this research were summarized as follows: The dyeing wastewater treatment sludges was below the Korea Leaching Limit. After incineration, the ash was manufactured as interlocking block. Bendable strength over 50kg$_{f}$/$\textrm{cm}^2$ suitable for interlocking block was obtained only when the sample was cured for 7days at sludge/cement ratio 2.5% and 5.0%. Hygroscopic ratio of interlocking block was above the Korea Industry Standard. We think that recycling of the incineration ash from dyeing wastewater treatment sludges to interlocking block will have high potential possibility.y.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.453-458
• /
• 2001

This study was performed to reuse the dyeing wastewater sludge treated by Fenton process through the solidification/stabilization technique. To solidify the dyeing sludge the industrial by-products such as blast furnace slag, fly ash and waste sand with cement were used. The laboratory scale and pilot scale test were conducted at room temperature to make construction brick which has high compressive strength and low leaching of heavy metals. The experimental results showed that blast furnace slag and fly ash could be used instead of cement and the products satisfied the regulation of Korean Standards. The blast furnace slag increased the compressive strength and the optimum ratio of slag/dyeing sludge on dry basis was found 0.4. The solidifying agent of SB series could increase rapidly the compressive strength and the optimum ratio of solidifying agent/sludge on dry basis was 0.26 at which the strength was two times compared with non-added condition. The portion of waste and industrial by-products in matrix was over 80%. From the pilot test the optimum pressure in molding was 100kg/$\textrm{cm}^2$ at which the compressive strength was over 100kg/$\textrm{cm}^2$. And the strength increased continuously to 160kg/$\textrm{cm}^2$ until 120 days curing time due to pozzolanic reaction. When SB-20 as a solidifying agent was used, the unconfined compressive strength of dyeing sludge could be obtained 110kg/$\textrm{cm}^2$ which satisfied the regulation of cement brick in Korea Standard(KS).

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.215-216
• /
• 2009

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.267-270
• /
• 2014

Since contaminants of syngas obtained from the biomass gasification are removed, the syngas is clean fuel. In this study a high-efficiency energy production system is developed. The system produces electricity using a waste pressure and feeds a low-pressure steam to Dyeing industrial complex. Also, iron oxide derived from dyeing sludge is utilized as a self-catalyst to reform a tar and reduce a tar emission from gasifier. This system increases the amount of syngas and finally achieves a highly efficient gasification.

• 방사선산업학회지
• /
• 제8권2호
• /
• pp.71-76
• /
• 2014

Endocrine disrupting chemicals (EDCs) and potential EDCs are mostly man-made, found in various materials such as pesticides, additives or contaminants in food, and personal care products. The high energy ionizing radiation has the ability to remove the EDCs with a very high degree of reliability and in a clean and efficient manner. The ionizing radiation interacts with EDCs both directly and indirectly. Direct interaction takes place with EDCs and the structure of EDCs is destroyed or changed. During indirect interaction, radiolysis products of water result in the formation of highly reactive intermediates which then react with the target molecules, culminating in structural changes. To confirm the radiation reduction of EDCs in industrial sludge, a pilot scale experiment up to 50 kGy of electron beam (EB) was conducted with samples from the textile dyeing industries. The experimental result showed the over 90% of reduction of Nonylphenol (NP) and Di(2-ethylhexyl) phthalate (DEHP) at around 10 kGy of absorbed doses.