• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.34-42
• /
• 1996

This Study was made to investigate alkaline dyeing systems for a new dyeing applicable polyester fibers. Disperse dyes for dyeing of polyester fibers were C.I. Red 60, Blue 56 and Yellow 54 as three primary colors of E type which used widely on the scene. Dyeing properties of dispers dyes on the polyester fibers are discussed according to variation of pH values for application of alkaline dyeing method compared with to ordinary acidic dyebath. Alkaline pH of the dyebath was controlled to pH 9 and 10.5 with buffer solutions using each hydrochloride and disodiumtetraborate, disodiumtetraborate and sodium hydroxide to promote the reproducibility of dyeing. Dyeing properties of dispers dyes on the polyester fibers by alkaline dyeing method compared with to ordinary acidic dyebath were discussed by estimation of color, wash-fastness, bleeding and migration of dyed polyester fabric.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.49-50
• /
• 2008

Dyeing and levelness properties of dyed PET woven fabric using a ultra low liquor ratio laboratory dyeing machine have been compared with those of PET woven fabric using a regular laboratory dyeing machine. The dyeing and levelness properties of dyed fabrics using a ultra low liquor ratio laboratory were better than those of dyeing using regular laboratory.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.545-549
• /
• 2003

Dyeing properties such as migration of disperse dye and color fastness of 4 types of the carrier[Carrier-I(methyl napthalene). Carrier-II(chloro benzene). Carrier-III(aromatic ether) and Carrier-IV(o-phenyl phenol)] were evaluated for the study. For the results, the optimum dyeing time and concentration of the carrier was 30min at $110^{\circ}C$ and 2g/l, respectively. The redyeing ratio of the fabric samples treated with Carrier-II and III was higher than that treated with Carrier-I and IV, thus, if was conclude that the redyeing ratio of the samples treated with Carrier-II and III was excellent. The light fastness of the samples treated with Carrier-III and IV was higher than that of Carrier-I and II in order of 2-4 grades. However, there were little changes in terms of washing and sublimation and rubbing fastness for the samples.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.47-52
• /
• 2008

Nylon textured yarn is usually manufactured by disk type false twist texturing. Dyeing properties of nylon textured yam have not been studied yet. In this study, dyeing properties of nylon textured yam according to draw ratio out of process parameters were investigated. The fact that microstructure of nylon textured yarn in amorphous region particularly is transformed by draw ratio was confirmed indirectly by measurement of dyeing rate because dyeing rate was affected by the structure of amorphous region. Dyeing rate at draw ratio 1.29 was the lowest because the higher draw ratio increase amorphous orientation and disturb dye diffusion into amorphous region. The microstructure according draw ratio was indirectly confirmed by 5% strength, tenacity, elongation. But difference in K/S value and fastness was insignificant.

• Textile Coloration and Finishing
• /
• v.6 no.2
• /
• pp.40-46
• /
• 1994

In order to study the properties of cochineal color, variation of uv, visible spectra by pH, dyeing properties on the silk in several dyeing conditions and thermodynamic parameter were investigated. Cochineal colors had an unusual to pH, especially had instability in alkali condition. An increase in the dyeing temperature and in time resulted in an increase in the dye content of silk fibers. Concentration of cochineal color in the silk fiber was related to pH and the maximum exhaustion of cochineal colors showed at about pH 3. The value of apparent diffusion coefficients and standard affinities of dyeing increased with the increase of dyeing temperature. The standard heats of dyeing(ΔH°), variation of entropy(ΔS°) and activation energy(E/sub act/) were caculated to be -1.72kcal/mo1, -3.77cal/mo1ㆍdeg and 1.26kcal/mo1, respectively. Silk fabrics were dyed bright red by tin chloride, reddish purple by copper sulfate, and bluish gray by iron sulfate, respectively. Lightfastness of silk fabrics mordanted by metal ion was weak.

• Textile Coloration and Finishing
• /
• v.20 no.5
• /
• pp.35-40
• /
• 2008

Dyeing and washing fastness properties of polyurethane-impregnated polyester (PU-impregnated PET), and the distribution of two disperse dyes between PET and PU film were studied to investigate the effect of PU portion to exhaustion and washing fastness. Dyeing properties of PU-impregnated PET were quite different with those of PET: PU-impregnated PET absorbed disperse dye linearly from the early stage of dyeing to equilibrium, and it exhibited excellent build-up property up to 4 %owf dyeing. The absorbed dye on PU film at early dyeing stage migrated to more substantive PET at the temperature higher than $115^{\circ}C$. The amount of exhausted dye on PET portion was larger than on PU film and the distribution ratio was $2.08{\sim}2.34$. The grade of washing fastness of PU-impregnated PET was the same as or lower by $0.5{\sim}1$ grade than PU film whose washing fastness was lower by $0.5{\sim}1$ than PET.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.8
• /
• pp.971-977
• /
• 1998

For the purpose of standardization and practicability of nautral dyeing, the mordanting and dyeing properties of Rhusjara ica was studied. Appropriate extraction, dyeing and mordanting condition of Rhusjara ica were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The most absorbance of Rhusjara ica solution was 299 nm. The color of Rhusjara ica solution was affected by pH 8~9. The optimum temperature to extract Rhusjara ica was 6$0^{\circ}C$ and dyeing solution for 1 hour. Effective dyeing time to silk was 60min. Effective mordanting temperature was 80~10$0^{\circ}C$, and its time was 30 min. K/S value of dyeing fabrics was recoginazed by mordanting treatment, specially Fe, Al, Cu. K/S value of pre-mordanting was higher than post-mordanting. In the case of Rhusjara ica fastness was increased by mordanting treatment.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.10-18
• /
• 1997

In order to study the properties of safflower yellow colors, thermodynamic parameters and dyeing properties on the silk in several dyeing conditions were investigated. The uv-visible spectra of safflower yellow colors in several solvents show hypsochromic shift with the polarity of solvent but bathochromic shift with increasing acidity of solution. The apparent diffusion coefficients and standard affinities of dyeing increased with the increase of dyeing temperature. The standard heat of dyeing(${\Delta}H^0$), entropy change(${\Delta}S^0$) and activation energy($E_{act}$) were calculated to be - 1.144kcal/mol, -7.498(5$0^{\circ}C$)~-3.804(9$0^{\circ}C$)cal/molㆍdeg and 0.123kcal/mol, respectively. The concentration of safflower yellow colors in the silk fiber increased with dyeing temperature, time, concentration of colors and acidity of initial dyebath. Silk fabrics were dyed bright yellow by pre-mordanting with tin chloride. Lightfastness of silk fabrics pre-mordanted by tin chloride was not excellent.

• Textile Coloration and Finishing
• /
• v.11 no.4
• /
• pp.39-49
• /
• 1999

In order to study the properties of cochineal colors, uv-visible spectra of cochineal colors solution, dyeing properties on the wool in several dyeing conditions and thermodynamic parameters were investigated. UV-visible spectra of cochineal colors solution showed hypochromic effect with the lapse of irradiation time but bathochromic shift with decreasing acidity of solution and addition of metallic ions. The concentration of cochineal colors in wool fiber increased with the increase of dyeing temperature, time, and acidity of initial dyebath. The value of apparent diffusion coefficients and standard affinities of dyeing decreased with the increase of dyeing temperature. The standard heats of dyeing$(\Delta{H}^\circ)$ and variation of entropy$(\Delta{S}^\circ)$ increased with the increase of concentration of initial dyebath. The activation energy$(E_a)$ were calculated to be 1.399~2.595kcal/mol in condition of 6~1%(o.w.f) dyebath. Wool fabrics were dyed reddish blue by iron sulfate, copper sulfate, aluminum acetate and tannic acid, and red by tin chloride, respectively. Lightfastness of wool fabrics dyed by cochineal colors were increased by mordant treatment, especially copper sulfate and iron sulfate treatment.

• Korean Journal of Human Ecology
• /
• v.8 no.4
• /
• pp.5-12
• /
• 2005

The Purpose of this study is to investigate dyeing properties of fabrics with rhubarb colorants. Rhubarb colorants were extracted with water from sliced dry root of rhubarb. Using rhubarb extract, wool fabric specimens were dyed under various conditions(temperature, time, pH, mordants). Effects of dyeing conditions and mordanting on dyeing properties and colorfastness were studied. The color of the dyed fabric specimens were predominantly yellow for all of the pH range. The optimum condition for dyeing with rhubarb extract was dyeing at $80^{\circ}C$ for 30minutes. Al of 4 kinds of mordating agents and pre-mordanting showed the highest chroma value. Washfastness was 3-4, but the dyed wool fabrics became darker on light exposure.