• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.592-592
• /
• 2013

We synthesized BiOI nanostructures with various doped-concentrations of Ag (0.1, 1.0, 5.0, 10.0 mol%) and Ti (1.0, 5.0, 10.0, 30.0, 50.0 mol%). They show spherical echinoid-like structures examined by scanning electron microscope. The BET surface areas were measured to be in the range of 40~70 $m^2$/g, which is reduced by doping. The indirect band gap was estimated to be 1.8 eV for undoped BiOI with no change and 1.0 eV increase upon Ag and Ti doping, respectively. The structures were further examined by X-Ray diffraction analysis, FT-IR, and photoluminescence. We also demonstrated adsorption and photocatalytic degradation performances for methyl orange and Rhodamine B on the echinoid-like BiOI structures.

• KSBB Journal
• /
• 제17권3호
• /
• pp.241-246
• /
• 2002

오늘날 섬유 염색공정에서 발생하는 염색폐수로 인해 많은 문제점들을 야기한다. 염색폐수에는 난분해성의 EG, PVA, TPA, 여러 종류의 계면활성제가 포함되어 있어 완전하게 처리하기가 어렵다. 현재 일반적으로 사용하고 있는 물리화학적 처리와 활성오니공정의 처리성을 향상하기 위하여 jet-loop reactor (JLR)와 물리화학적 처리를 결합한 새로운 공정을 개발하였다. JLR의 부피산소전달계수는 air-lift 반응기에 비해 아주 우수하였다. 또한 좀더 효율적인 처리를 위하여 JLR에 활성탄 담체를 적용하여 (JLRAS) 실험하였다. 체류시간이 8시간일 때 BOD, $COD_{Mn}$, $COD_{Cr}$, 색도 제거율은 각각 99, 86, 84, 83%로 우수하였다. JLRAS 성능은 $COD_{Mn}$의 부하 변동에도 아주 빠르게 회복되었다. 2차 물리화학적 응집처리의 최적 응집제로는 폴리황산제2철이며 130 mg/L 투입하였을때 $COD_{Mn}$과 색도의 제거율은 자각 85, 73%였다. 결론적으로 이 공정으로 난분해성의 많은 유기물을 효율적으로 처리할 수 있으며 운전비용도 감소시킬 수 있었다.

• KSBB Journal
• /
• 제10권3호
• /
• pp.241-248
• /
• 1995

염색가공 폐수 중 난분해성 물질이 PYA를 처리 하기 위하여, 한천-acrylamide를 이용한 bead를 제 조한 후 air-lift 반응기에서 연속실험을 행하였다. 합성폐수의 PYA놓도가 $3,100mg/\ell$. 체류시간 24hr일 때 유출수의 농도는 $4500mg/\ell$ 이며, 제거효율은 85% 이상을 나타내었다. 실제 호발폐수의 경우 PYA 및 COD농도가 $3,253mg/\ell$, $4,500mg/\ell$일 때, 체류시간 24hr에서 유출수의 농도는 $840mg/\ell, 480mg/\ell$이며, 제거효 율은 81.3%와 85.2%로 각각 나타났다. bead의 지름이 lmm일 때는 내부의 미생물 성장 이 양호하였으나 bead의 지름이 2mm일 때는 기질 과 산소전달저항에 의하여 반지름의 48% 이상은 미 생물의 성장이 저해를 받았다. 고정화 반응기에서 전체 기질 제거속도 중 bead 내 고정화 cell의 제거 분율은 평균 70%로 나타났다. 현탁 반응기에서 희석율 $0.083hr^{-1}$ 이상에서는 기질 이용속도가 감소하였으나 고정화 반응기에서는 희석율 $0.125hr^{-1}$까지 거의 선형척으로 증가하였다. PYA 제거속도식에서 포화상수 $K_s=6.60(g PVA/\ell)$와 최대 비기질 이용속도 k=0.175(g PVA/g cell.hr)를 얻었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.993-994
• /
• 2008

Electrochromic (EC) devices are capable of reversibly changing their optical properties upon charge injection and extraction induced by the external voltage. The characteristics of the EC device, such as low power consumption, high coloration efficiency, and memory effects under open circuit status, make them suitable for use in a variety of applications including smart windows and electronic papers. Coloration due to reduction or oxidation of redox chromophores can be used for EC devices (e-paper), but the switching time is slow (second level). Recently, with increasing demand for the low cost, lightweight flat panel display with paper-like readability (electronic paper), an EC display technology based on dye-modified $TiO_2$ nanoparticle electrode was developed. A well known organic dye molecule, viologen, was adsorbed on the surface of a mesoporous $TiO_2$ nanoparticle film to form the EC electrode. On the other hand, ZnO is a wide bandgap II-VI semiconductor which has been applied in many fields such as UV lasers, field effect transistors and transparent conductors. The bandgap of the bulk ZnO is about 3.37 eV, which is close to that of the $TiO_2$ (3.4 eV). As a traditional transparent conductor, ZnO has excellent electron transport properties, even in ZnO nanoparticle films. In the past few years, one-dimension (1D) nanostructures of ZnO have attracted extensive research interest. In particular, 1D ZnO nanowires renders much better electron transportation capability by providing a direct conduction path for electron transport and greatly reducing the number of grain boundaries. These unique advantages make ZnO nanowires a promising matrix electrode for EC dye molecule loading. ZnO nanowires grow vertically from the substrate and form a dense array (Fig. 1). The ZnO nanowires show regular hexagonal cross section and the average diameter of the ZnO nanowires is about 100 nm. The cross-section image of the ZnO nanowires array (Fig. 1) indicates that the length of the ZnO nanowires is about $6\;{\mu}m$. From one on/off cycle of the ZnO EC cell (Fig. 2). We can see that, the switching time of a ZnO nanowire electrode EC cell with an active area of $1\;{\times}\;1\;cm^2$ is 170 ms and 142 ms for coloration and bleaching, respectively. The coloration and bleaching time is faster compared to the $TiO_2$ mesoporous EC devices with both coloration and bleaching time of about 250 ms for a device with an active area of $2.5\;cm^2$. With further optimization, it is possible that the response time can reach ten(s) of millisecond, i.e. capable of displaying video. Fig. 3 shows a prototype with two different transmittance states. It can be seen that good contrast was obtained. The retention was at least a few hours for these prototypes. Being an oxide, ZnO is oxidation resistant, i.e. it is more durable for field emission cathode. ZnO nanotetropods were also applied to realize the first prototype triode field emission device, making use of scattered surface-conduction electrons for field emission (Fig. 4). The device has a high efficiency (field emitted electron to total electron ratio) of about 60%. With this high efficiency, we were able to fabricate some prototype displays (Fig. 5 showing some alphanumerical symbols). ZnO tetrapods have four legs, which guarantees that there is one leg always pointing upward, even using screen printing method to fabricate the cathode.

• 폴리머
• /
• 제29권6호
• /
• pp.593-598
• /
• 2005

Layer-by-layer(LbL) 자기 조립법에 의한 poly(ethylene-alt-maleic anhydride)(PEMAh)/poly(4-vinyl pyridine)(P4VP) 다층막의 염료 흡착 거동 및 pH 변화에 의한 염료 방출 거동을 Rodamine 6G(R6G)를 지시제로 사용하여 조사하였다. UV-vis 분광 분석을 이용하여 (PEMAh/P4VP)n 다층막의 두께 및 R6G의 흡착 및 방출 거동을 조사하였다. 다층막에 흡착되는 R6G의 흡착량은 필름의 두께 증가에 따라 선형적으로 증가하였다. (PEMAhAh/P4VP)n 다층막의 투과성은 pH 조건에 민감한 거동을 보였으며, 방출액의 pH가 감소할수록 R6G 방출 속도와 방출량은 증가하였다. PEMAh/poly(ethyleneimine)(PEI) capping layer를 (PEMAh/P4VP)n 다층막에 추가로 적층함으로써 흡착된 R6G의 방출 속도를 조절할 수 있었다.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.94-100
• /
• 2010

Colored compounds adsorption from the textile dyeing effluents on activated carbons produced from various indigenous vegetable sources by zinc chloride activation is studied. The most important parameters in chemical activation were found to be the chemical ratio of $ZnCl_2$ to feed (3:1), carbonization temperature (460-470 $^{\circ}C$) and time of activation (75 min). The absorbance at 511 nm (red effluent) and 615 nm (blue effluent) are used for estimation of color. It is established that at optimum temperature ($50^{\circ}C$), time of contact (30-40 min) and adsorbent loading (2 g/L), activated carbons developed from rain tree (Samanea saman) saw dust and blackberry (Randia formosa) tree saw dust showed great capability to remove color materials from the effluents. It is observed that adsorption of reactive dyes by all types of activated carbons is more than that of disperse dyes. It is explained that because of its acidic nature the activated carbon can adsorb better reactive dye particles containing large number of nitrogen sites and $-SO_3Na$ group in their structure. The use of activated carbons from the indigenous biomass would be economical, because saw dusts are readily available waste worldwide.

• 한국대기환경학회지
• /
• 제13권3호
• /
• pp.207-214
• /
• 1997

We collected airborne complex mixtures in a industrial area of Yeochun, and examined whether these complex mixtures could affect gap junctional intercellular communication (GJIC) in a cultured WBF-344 rat liver epithelial cells (LEC). Since the reduction of GJIC plays an important role in chemical carcinogenesis, measurement of changes of GJIC is a meaningful method to screen carcinogenicity of these mixtures. High and low volume samples were dissolved in dimethyl sulfoxide (DMSO) and tested. Blank filter extractions were also examined for exclud-ing possible toxicity of filter itself, and TPA (12-O-tetradecanoylphorbol-13-acetate) and DMSO were used as positive and negative control, respectively. When the cells were exposed to samples at concentration below that required to maintain rather than 85% cell viability based on the result of neutral red uptake assay, maximal inhibition of GJIC was observed at 1hr after treatment with both high and low volume samples by scrape-loading dye transfer assay. In fluorescence recovery after photobleaching assay, recovery rates via gap junctions were 33%/min in high volume sample and 62%/min in low volume sample. In together, airborne samples collected in Yeochun inhibited GJIC in a cultured WBF-344 rat LEC. These results suggest airborne samples tested in this experiment may attribute to cause a certain type and degree of cancers in in vivo when exposured for some periods.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.256-257
• /
• 2014

The effects of the preparation conditions of ZnO-modified TaON on the photocatalytic activity for degradation of rhodamine B dye (Rh. B) under simulated solar light were investigated. The ZnO/TaON nanocomposite were prepared by loading particulate $Ta_2O_5$ with ZnO using different ZnO contents, followed by thermal nitridation at 1123 K for 5 h under $NH_3$ flow (20 ml min.1). The asprepared samples were characterized by XRD, UV-Vis-DRS, and SEM-EDX. The results revealed that the band gap energy absorption edge of as prepared nanocomposite samples was shifted to a longer wavelength as compared to ZnO and $Ta_2O_5$, and the 60 wt% ZnO/TaON nanocomposite exhibited the highest percentage (99.2 %) of degradation of Rh. B and the highest reaction rate constant ($0.0137min^{-1}$) in 4 h which could be attributed to the enhanced absorption of the ZnO/TaON nanocomposite photocatalyst. Hence, these results suggest that the ZnO/TaON nanocomposite exhibits enhanced photocatalytic activity for the degradation of rhodamine B under simulated solar light irradiation in comparison to the commercial ZnO, $Ta_2O_5$, and TaON.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.3039-3045
• /
• 2013

Dual-frequency ultrasound assisted photocatalysis (DUAP) method was proposed to degrade a stable organic model effluent, cresol red (CR), using the prepared $Fe^{3+}$-doped $TiO_2$ with active carbon fiber loading ($Fe^{3+}-TiO_2/ACF$) as photocatalyst. The influence of key factors, including Fe doping amount and power density of dual-frequency ultrasounds (20/40 kHz), on the degradation efficiency was investigated. The degradation efficiency rises to 98.7% in 60 min accompanied by the color removal of CR liquid samples from yellow to colorless transparent at optimal conditions. A synergy index of 1.40 was yielded by comparison with single ultrasound assisted photocatalysis (SUAP) and the photocatalysis without ultrasound assisted (UV/$TiO_2$), indicating that a clear synergistic effect exists for the DUAP process. Obvious enhancement of degradation efficiency for the DUAP process should be attributed to production of large amount of free radicals by strong cavitational effects of dual ultrasounds.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.408-415
• /
• 1999

수산화칼슘은 높은 항균성으로 인해 최근에 근관소독제로 사용이 추천되고 있는 약제이다. 본 연구자는 근관내에 수산화칼슘을 투약한 후에 산화아연유지놀계 시멘트로 근관 충전을 하는 경우 근관시멘트의 물성의 변화를 경험할 수 있었다. 본 연구의 목적은 수산화칼슘을 근관내에 투약 후 근관충전재로 산화아연유지놀계 시멘트를 사용하는 경우 발생하는 근관시멘트의 물성변화를 알아보기 위함이다. 이를 위하여 수산화칼슘-유지놀 화합물의 불성 중 용해도, 흡수성, 피막도 및 변연폐쇄성을 기성 산화아연유지놀계 근관 시멘트인 Tubli-seal$^{(R)}$과 비교하여 연구하였다. 용해도와 흡수생의 측정을 위하여 ADAS No. 57에 따라 지름 20mm 두께 15mm인 시편을 제작하여 $37^{\circ}C$ 50ml의 증류수에 7일간 침잠후 무게의 변화를 측정하였고, 피막도 측정을 위하여 ADAS No. 57에 따라 두 유리판 사이에 실험물질을 위치시키고 15 Kg의 하중을 가한 후에 두께의 증가를 측정하였다. 마지막으로 변연폐쇄성 측정을 위해서는 우치 상아질 면과 아크릴 봉 사이에 실험물질을 위치시킨 후 3일 동안 Pelican ink에 침잠시킨 후 색소의 침투 면적을 계산하여 다음과 같은 결과를 얻었다. ${\cdot}$ 수산화칼슘-유지놀 화합물의 흡수성은 59.72${\pm}$17.75%로 측정되어 3.15${\pm}$0.76%로 측정된 Tubli-seal$^{(R)}$에 비해 유의하게 높게 나타났다(p<0.05). ${\cdot}$ 수산화칼슘-유지놀 화합물의 용해도가 20.98${\pm}$2.94%로 측정되어 2.52${\pm}$0.49%로 측정된 Tubli-seal$^{(R)}$에 비해 유의하게 높게 나타났다(p<0.05). ${\cdot}$ 수산화칼슘-유지놀 화합물의 피막도가 0.36${\pm}$0.03 mm로 측정되어 0.12${\pm}$0.01mm로 측정된 Tubli-seal$^{(R)}$에 비해 유의하게 높게 나타났다(p<0.05). ${\cdot}$ 수산화칼슘-유지놀 화합물의 미세누출은 3일 동안의 색소 침투면적이 57.63${\pm}$25.85%로 측정되어 28.05${\pm}$23.46%로 측정 된 Tubli-seal$^{(R)}$에 비해 유의하게 높게 나타났다(p<0.05).