• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.235-238
• /
• 2004

The simple motor construction and low cost, fault tolerant power electronic drive has made the switched reluctance drive a strong contender for many applications. But the switched reluctance drive does exhibit higher levels of vibration and acoustic noise than that of most competing drives. The main source of vibration in the switched reluctance drive is generated by rapid change of radial force when phase current is extinguished during commutation action. In this paper, a hybrid excitation method is proposed to reduce vibration and acoustic noise of the switched reluctance drive. The hybrid excitation has 2-phase excitation by long dwell angle as well as conventional 1-phase excitation. The vibration and acoustic noise are reduced because the scheme reduces abrupt change of excitation level by distributed and balanced excitation.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.28-37
• /
• 2006

State-dependent call admission control (SDCAC) is proposed to make efficient use of scarce wireless resource in a hierarchical wireless network with heterogeneous traffic. With SDCAC, new calls are accepted according to an acceptance probability taking account of not only cell dwell time but also call holding time and system state (i.e., occupied bandwidth). An analytical method is developed to calculate performance measures of interest, e.g., new call blocking probability, forced termination probability, over. all weighted blocking probability. Numerical results with not only stationary but nonstationary traffic loads are presented to show the robustness of SDCAC. It is shown that SDCAC performs much better than the other considered schemes under nonstationary traffic load.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.877-879
• /
• 2001

The switched reluctance motor (SRM) has a simple motor construction with no rotor windings. It also has simple concentrated windings on the stator windings. Thus it is expected to be a lower cost machine to manufacture than other motors. This paper has computed an optimal parameters asking for SRM drives using by PC-SRD that was programmed by T. J. E. Miller/M. Mcgilp. According to advanced angle and dwell angle, the output, efficiency, currents and torque were computed. The experiments with 8/6 SRM have tested.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.219-221
• /
• 2006

In an attempt to optimize friction spot joining process of Al alloys for automobiles, Friction spot joining was used make lap feint on strips of AA5052-H32 and AA6022-T4 aluminium alloy. The effects of joining parameters such as tool rotating speed, plunging depth, joining time and kind of upper plate on the joints properties were investigated. An optimal tensile shear strength parameter of a tool rotating speed of 1000rpm, dwell time 2.5sec with upper plate 6022 can be found to make a good joint.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.2
• /
• pp.101-106
• /
• 1999

The main consideration factor to design a magnetron of the sputtering system for TFT-LCD metallization is high sheet resistance (Rs) uniformity which is provided by the high target erosion and high current efficiency. The present study has developed a rectangular magnetron for TFT-LCD to bve considered full target erosion and high film uniformity. After an aluminum-2 at.% and alloy target was installed in a magnetron source and the film was deposited on the glass of 600${\times}$720 mm, the Rs uniformity of the deposited film was measured as functions of the magnet tilt and magnet scanning configuration. And the target erosion profile was observed with the target voltage. When sputtered at 4mtorr and 10kW, the magnet tilt for the high Rs uniformity of 8.38% was 7mm. The plasma voltage at the dwell home and end for full-face target erosion, when scanned the magnetron was 120% compared to the mean voltage of the other area.

• Animal Systematics, Evolution and Diversity
• /
• no.spc9
• /
• pp.30-36
• /
• 2016

As a part of the commemorative joint faunal survey for the 30th anniversary of the Korean Society of Systematic Zoology, the molluscan fauna of Jindo Island was investigated based on sample collection from 6 localities from the 6 to the 8 of Jul 2016. A total of 114 molluscan species from 47 families were collected and identified. Among these, 42 species from 11 families are newly reported from Jindo Island and combining the previous records with the present study totals 157 species from 57 families. Distribution of species records indicates that marine biogeography of Jindo Island represent an overlapping zone for marine organisms which dwell in the Yellow sea and the southern sea areas of Korean waters.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.23-25
• /
• 1998

Many of the currently used PN code acquisition algorithms detect the phase of the incoming PN signal on the basis of ML estimation principle and utilize statistics grounded in taking inner products. By showing that any set of 2n-1 PN sequences arising in SSRG or MSRG (those typically used in IS'95 implementations) configuration constitutes a linearly independent set and that the number of candidate PN sequences has to equal the dimension of the span of the candidate PN sequences, we prove that the lowerbounding computational complexity involved in any PN code acquistion, utilizing (only) inner product computations at each stage of acquisition, corresponds precisely to those, such as double dwell acquistion circuitries, currently used.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.5
• /
• pp.439-444
• /
• 2012

In this study, we address the formation control problem of coupled unicycle-type mobile robots, each of which can interact with its neighboring robots by communicating their position outputs. Each communication link between two mobile robots is assumed to be established according to the given time-varying interconnection topology that switches within a finite set of connected fixed undirected networks and has a non-vanishing dwell time. Under this setup, we propose a distributed formation control algorithm by using the dynamics extension and feedback linearization methods, and by employing a consensus algorithm for linear multi-agent systems which provides arbitrary fast convergence rate to the agreement of the multi-agent system. Finally, the proposed result is demonstrated through a computer simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2527-2534
• /
• 2002

An efficient method is proposed for the design of six-bar function generators with complex design tasks. Especially, the desired functions are defined for the entire motion ranges of the input variables. The design problem is defined as a nonlinear optimization problem. A concept of a weighted structural error is introduced for the definition of the objective function. Also simple branch identifiers are incorporated to eliminate the branch problems commonly encountered in a typical linkage synthesis problem. Two example problems of designing a Watt-II type double dwell mechanism and a Stephenson-III type double beat-up mechanism are demonstrated with numerical results. Constraints such as on the Grashof conditions and on the transmission angles are included for practical solutions.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.55-60
• /
• 2011

Recently, the application of electronics in vehicle is increasing, in order to assess the reliability of the electronics, highly accelerated life test is used, highly accelerated life test can assess the reliability of the electronics in the short time. In this study, optimized HALT technique can be applied to the electronics is proposed. The main results are as follows; i) HALT is proceed to the 8-step process. ii) The test mode of HALT is composed of the cold step stress, hot step stress, vibration step stress and combined environments stress. iii) The time dwell is set to at least 20 minutes.