• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.245-250
• /
• 1999

The experimental study of die-sinking electrical discharge machining for alloy tool steel of STD-11 with circular electrode was conducted for various conditions of the peak current and duty factor with the change of internal size of electrode for distributing the amount of dielectric flow through the electrode. From this study, the material removal rate(MRR) was found to be increased with the peak current and duty factor. The more MRR was obtained for the case of electrode inside diameter of 10mm. The surface roughness and roundness values were analyzed regularity under various conditions, and these values were not affected by the inside diameter change of electrode.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.423-424
• /
• 2014

본 논문에서는 배터리 충 방전을 위한 새로운 고승압 양방향 DC-DC 컨버터를 제안한다. 제안 회로는 하나의 회로로 양방향 스위치가 가능하게 하였다. 기존 DC-DC 컨버터는 고주파 스위칭 동작 시 손실분 저항의 증가로 승압이 어려운 문제점이 있다. 이를 위해 기존 Boost converter 회로 방식보다 승압비가 높은 회로를 제안하였다. 그리고 기존 충전회로는 10배 이상의 입 출력 강압변환 시, 낮은 duty cycle로 소자 스트레스가 높아 고 사양의 소자를 사용해야 했다. 제안회로는 충전 시, Buck converter 동작을 하면서 기존 duty cycle 보다 3배가량 높아 소자 스트레스를 줄였다. 이를 모의실험 및 실험을 통해 타당성을 검증하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.208-208
• /
• 2003

RF 마그네트론 스퍼터링법을 이용하여 Ar과 $O_2$의 유량을 25sccm씩 흘리면서 $SiO_2$/Si기판 위에 Sn $O_2$ 박막을 증착하였다. 증착된 박막은 columnar 구조로 성장하였으며 많은 입자들이 뭉쳐서 형성된 양배추꽃(cauliflower) 형태의 뭉친 입자(agglomerates)를 가지는 표면형상이 관찰되었다. 분위기에 따른 어닐링 효과를 확인하기 위하여 50$0^{\circ}C$에서 공기와 질소 분위기하에서 열처리하였다. 열처리한 후 표면거칠기가 개선되었으며, 표면형상의 변화가 발생하였다. 특히 50$0^{\circ}C$, 질소분위기에서 어닐링한 경우는 양배추꽃 형태의 표면형상이 소수의 작은 입자가 뭉친 형태로 분리되면서 입도분포가 개선되었다. 이러한 결과는 어닐링 과정에서 발생되는 응력을 완화시키기 위하여 표면형상의 변화가 발생하는 것으로 판단된다. XPS 측정 결과, 질소 분위기에서 어닐링한 후에 OIs와 Sn5/3d 피크가 낮은 결합에너지에 위치하고 있어 산소공공의 농도가 어닐링 전에 비하여 증가하였음을 확인할 수 있다. 어닐링 전후에 Sn $O_2$ 박막의 면저항 측정 값은 XPS 결과와는 달리 질소 분위기 어닐링한 후에 오히려 면저항값이 크게 증가하였다. 이러한 결과는 질소 분위기 어닐링한 후 표면형상의 변화에 기인하여 입자간의 연결성이 저하되어 면저항값이 증가한 것으로 추정된다. 산소분위기에서 어닐링한 후에 전체적으로 전기적 특성의 재현성이 개선되었으며 Sensitivity( $R_{air}$/ $R_{gas}$)가 향상되었음을 확인하였다.하였다.석을 통하여 La의 분포를 확인하였으며, HRTEM 분석을 통하여 미세구조분석을 실시하였다.2463eV였다. 10K에서 광발광 봉우리의 919.8nm (1.3479eV)는 free exciton(Ex), 954.5nm (1.2989eV)는 donor-bound exciton 인 I2(DO,X)와 959.5nm (1.2921eV)는 acceptor-bound exciton 인 I1(AO,X) 이고, 964.6nm(1.2853eV)는 donor-acceptor pair(DAP) 발광, 1341.9nm (0.9239eV)는 self activated(SA)에 기인하는 광발광 봉우리로 고찰되었다.가 높을수록 방출전류가 시간에 따라 급격히 감소하였다. 각 duty비에서 방출전류의 양이 1/2로 감소하는 시점을 에미터의 수명으로 볼 때 duty비 대 에미터 수명관계를 구해 높은 duty비에서 전계방출을 시킴으로써 실제의 구동조건인 낮은 duty비에서의 수명을 단시간에 예측할 수 있었다. 단속적으로 일어난 것으로 생각된다.리 폐 관류는 정맥주입 방법에 비해 고농도의 cisplatin 투여로 인한 다른 장기에서의 농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았다이 낮았으나 통계학적 의의는 없었다[10.0%(4/40) : 8.2%(20/244), p>0.05]. 결론: 비디오흉강경술에서 재발을 낮추기 위해 수술시 폐야 전체를 관찰하여 존재하는 폐기포를 놓치지 않는 것이 중요하며, 폐기포를 확인하지 못한 경우와 이차성 자연기흉에 대해서는 흉막유착술에 더 세심한 주의가 필요하다는 것을 확인하였다. 비디오흉강경수술은 통증이 적고, 입원기간이 짧고,

• Korean Security Journal
• /
• no.10
• /
• pp.127-147
• /
• 2005

This study (research) has been done on the job, job-satisfaction and job dedication of body guards from many sectors in Korea. This research is focused on the relationship of job, job-satisfaction and job-dedication in diverse aspects in order to build up a detailed theory, As a result, teams of body guard can enhance their systematic efficiency through the theory. Therefore in this chapter, it will re-examine the result of this research and discuss about the theoretical and practical aspect of the result. This study(research) will be the outset(start) for the organizational behavior study of the body guards in Korea. Especially, this research tries to distinguish the duty aspect and the general feature of the body guards, satisfaction along with the level of dedication. Therefore it will give the persons concerning the bodyguards many theoretical and practical points to consider. But there is a limitation as crossing research that in this research we didn't research in compensation for all internal body guards and accomplishment of research has achieved in a short-time. Though it will be necessary to accomplish in henceforth research, if at all possible, in compensation for all body guards and much more diverse security service classification, also for a long time extended vertical research.

• Journal of Climate Change Research
• /
• v.3 no.4
• /
• pp.235-243
• /
• 2012

Mobile sources are one of the most significant contributors to the inventory of greenhouse gas (GHG). The administration in Korea has set a goal of cutting GHG emissions of vehicles by 34.3% compared to Business As Usual (BAU) by 2020. To achieve this goal, GHG emission standards for vehicles have been applied since 2012, and now light-duty trucks are under consideration to be included to the vehicle types that will be regulated in the new version of GHG emission standards. Therefore, this study focuses on analyzing characteristics of exhaust GHGs (CO2, CH4, and N2O) emissions of diesel light-duty trucks according to their various driving modes. GHGs emissions of diesel light-duty trucks reduced in inverse proportion to the speed of the vehicles. GHGs emissions from the combined mode were 8% and 14% lower than those from the CVS- 75 and NEDC modes, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.537-548
• /
• 2022

It is important to design the pavement thickness considering heavy-duty traffic loads, which can cause excessive stress and strain in the pavement. Port-rear roads and industrial roads have many problems due to early stress in pavement because these have a higher ratio of heavy loads than general roads such as national roads and expressways. Internationally, composite pavement has been widely applied in pavement designs in heavy-duty areas. Composite pavement is established as an economic pavement type that can increase the design life by nearly double compared to that of existing pavement while also decreasing maintenance and user costs. This study suggests a thickness design method for composite pavement using roller-compacted concrete as a base material to ensure long-term serviceability in heavy-duty areas such as port-rear roads and industrial roads. A three-dimensional finite element analysis was conducted to investigate the mechanical behavior and the long-term pavement performance ultimately to suggest a thickness design method that considers changes in the material properties of the roller-compacted concrete (RCC) base layer. In addition, this study presents a user-friendly catalog design method for RCC-base composite pavement considering the concept of linear damage accumulation for each container trailer depending on the season.

• The Korean Society of Law and Medicine
• /
• v.24 no.2
• /
• pp.119-145
• /
• 2023

The Pharmaceutical Affairs Act stipulates medication counseling as an obligatory requirement in the case of preparation of medicine. In fact, there are many cases where pharmacists only tell patients the dose and time and do not properly guide them on taking medications. However, in light of the current situation where non-face-to-face treatment is being attempted, there is a high possibility of drug-taking accidents due to insufficient medication guidance. In addition, as an aging society progresses, the need for explanations on pharmaceuticals is increasing. If a pharmacist causes damage to a patient by failing to give appropriate medication guidance, the patient can claim compensation for damages. In addition, if a drug accident occurs due to a conflict between the pharmacist's duty to guide medication and the doctor's duty to explain, a joint tort is established between the pharmacist and the doctor. Nevertheless, there are cases in which only doctors are judged to bear the tort liability. However, the Pharmaceutical Affairs Act includes providing information for the selection of over-the-counter drugs in the medication guidance as part of the medication guidance obligation. Therefore, in order to reconsider the importance of the medication-taking guidance duty, it is necessary to define the medicationaking information provision method and the medication-taking guidance duty as separate concepts. In addition, it is necessary to amend related regulations centered on patients so that medication guidance, such as side effects of medicines and interactions with concomitant medications, can be made in detail.

• Korean Journal of Human Ecology
• /
• v.14 no.1
• /
• pp.217-221
• /
• 2005

In this study, the effect of microwave treatment on physico-chemical properties and microbial changes of beef and pork loin was investigated. Beef and pork were heated in microwave with an adjusted electric output at 500 W and operating frequency 2,450 MHz. The beef and pork samples were treated with microwave for 10 s or 20 s at 50% duty cycle. Drip losses and TBA values of beef and pork samples increased due to the microwave treatment. The samples became darker and more yellowish through microwaves, whereas their redness was unchanged. Microbial content of beef and pork samples declined as the treatment time increased. When pork samples were heated in a microwave oven, organisms were reduced by 2 log cycles in 20 s. It was concluded that a 20 second-long microwave treatment can great1y enhance the microbial safety of the pork sample.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1596-1602
• /
• 2021

Battery-operated IoT devices in IoT systems require low power consumption. In general, IoT devices enter a sleep state synchronously to reduce power consumption. A problem arises when an IoT device has to handle asynchronous user requests, as the duty cycle must be reduced to enhance response time. In this paper, we propose a new low-power-consumption scheme, called Repetitive Wake-up scheme for IoT systems of asynchronous environments such as indoor lights control. The proposed scheme can reduce power consumption by sending wake-up signals from the smartphone repetitively and by retaining the IoT device in sleep state to the smallest possible duty cycle. In the various environments with IoT devices at home or office space, we showed that the proposed scheme can reduce power consumption by up to five times compared to the existing synchronous interlocking technique.

• Journal of agricultural medicine and community health
• /
• v.38 no.4
• /
• pp.229-242
• /
• 2013

Objectives: The objective of this study was to identify the influence of shift work on sleep quality, daytime sleepiness, and perceived errors during nursing work among hospital nurses. Methods: The study subjects were 209 hospital nurses working in two general hospitals in South Korea. The data were collected through self-administered questionnaires in May 2013. Sleep quality was measured using Korea Pittsburgh Sleep Quality Index (PSQI-K), daytime sleepiness was measured using Epworth Sleepiness Scale (ESS), and perceived errors in past 6 months during nursing duty hours with the tool developed in this study. Results: The sleep quality was significantly worse among rotating shift nurses when compared to fixed day duty nurses. However, the odds ratio (OR) of 1.92 [95% confidence interval(CI): 0.58-6.37] adjusted for sociodemographic variables, health behaviors, and working environment in logistic regression was not significant. There was no significant difference in the daytime sleepiness between rotating shift nurses and fixed day duty nurses in both simple and multivariable analyses. There were significantly more perceived errors in rotating shift nurses than fixed day duty nurses. However, the OR of 1.26 (95% CI: 0.38-4.21) adjusted for sociodemographic variables, health behaviors, working environment, sleep quality, and daytime sleepiness in logistic regression was not significant. Depression (OR=3.31, 95% CI: 1.11-9.84) and daytime sleepiness(OR=1.18, 95% CI: 1.07-1.30) were significantly associated with perceived errors in logistic regression. Conclusion: This study suggested shift work among hospital nurses had no independent influence of sleep quality, daytime sleepiness, and perceived errors. However, daytime sleepiness had independent influence of perceived errors. More studies are warranted to achieve more reliable conclusion.