• 제목/요약/키워드: Duty 비

검색결과 344건 처리시간 0.025초

Heavy-duty HCNG엔진의 연소 및 배기성능 최적화에 관한 연구 (A Study on the Optimization of Combustion and Emission Performance in a Heavy-duty HCNG Engine)

  • 최영;박철웅;원상연;김창기
    • 한국가스학회지
    • /
    • 제15권2호
    • /
    • pp.15-20
    • /
    • 2011
  • 도심 대기오염을 줄이고자 도입된 CNG 버스는 현재의 배기규제 기준을 만족시켜 도시 대기환경 개선에 많은 기여를 했지만 추가적인 후처리 장치의 도움 없이는 차기 배기기준인 유로6 배기규제를 만족시키기 매우 어렵다. 수소는 매우 활발하고 빠른 반응성을 가지고 있으며 희박가연한계 또한 매우 넓어 기존 연료와 함께 사용 시 개선된 연소 및 배기성능을 기대할 수 있다. 따라서 본 연구에서는 시내버스용 대형 CNG 엔진에 수소를 일정 부분 CNG와 혼합한 HCNG 연료를 공급하여 희박연소를 시킴으로서 연소 및 배기성능을 개선하는 실험을 수행하였다. 수소혼합비율, 공연비, 점화시기 변화에 따른 연소 및 배기성능을 살펴보고 최적운전조건을 찾아내었으며 산화촉매 성능평가를 통해 11리터 버스용 HCNG 엔진의 상용화 가능성을 검토하였다.

경찰관의 성격 및 창의적 인성이 직무만족에 미치는 영향에 관한 연구 (The study of influence of policeman's personality to job satisfaction)

  • 이상원;박제일
    • 시큐리티연구
    • /
    • 제16호
    • /
    • pp.209-228
    • /
    • 2008
  • 경찰공무원은 임무의 특수성 때문에 다른 공무원들이 가지는 권한행사에 비해 제약 요인이 많다고 볼 수 있다. 이러한 특수성 때문에 경찰관들은 업무 수행 시 돌발적 상황들과 직면하게 되고 심각한 스트레스나 문제들을 유발할 수 있다. 경찰활동이 최상의 효율성을 낳기 위해서는 경찰관들의 직무에 대한 만족이 있을 때만 가능한 것이다. 최근, 다양한 직무만족에 관한 연구에서 개인의 만족도를 결정짓는 요인에 대한 관심이 증대되고 있고, 경찰조직에서도 조직구성원의 관리에 신경을 쓰고 있는 실정이다. 본 연구는 경찰관의 성격 및 창의적 인성이 직무만족에 미치는 영향을 규명하는데 연구의 목적을 두고 있다. 본 연구를 위한 측정은 설문조사방법을 사용하였고, 경기지방경찰학교에 입소한 경찰관 151명을 대상으로 하였다. 성격검사는 LCSI검사법을 사용하여 5개요인(도전성, 사교성, 수용성, 신중성, 안정성)을 측정하였고, 창의성(CPI)검사는 5개요인(개념화, 변화지향, 상상, 독창성, 심미성)의 검사를 하였다. 직무만족도 검사는 14개 문항에 대한 요인검사를 실시하였다. 검사결과 성격과 창의적 인성은 직무만족이라는 측면에서 경찰관의 자기개발, 교육 등에서 고려해야 할 중요한 요소임이 검증되었다.

  • PDF

의료행위의 특질 재론 ( A Re-discussion on the Characteristics of Medicine)

  • 석희태
    • 의료법학
    • /
    • 제25권1호
    • /
    • pp.3-58
    • /
    • 2024
  • It has become a general idea today that the characteristics of medicine should be considered as a basis when discussing a medical personnel's duty of care and whether or not it has been violated, and when discussing its duty of explanation and whether or not it has been fulfilled in medical practice. However, in the discussion of its characteristics, some shortcomings still exist, so the need for a re-discussion has been raised. Firstly, existing discussions on characteristics have failed to comprehensively grasp and explain the characteristics of medical practice. Secondly, in some researchers' arguments, there are discrepancies between the terms used to express characteristics and their conceptual definitions or content. Thirdly, the lack of exemplified cases that reflect the characteristics of medicine - especially Supreme Court precedents - has led some to think negatively about the recognition and reflection of certain characteristics. In my early writings, I have described five characteristics of medical practice: 'conflict in medical goals', 'initiating appropriate medical actions (progression of illness)', 'dynamics of medical intervention (diversity of symptoms)', 'diversity of medical effects', 'inherent risk of medical treatment (invasiveness)'. In this paper, keeping in mind the reasons for the need for reconsideration, I aim to analyze the characteristics of medicine in detail and cite key parts of representative Korean Supreme Court precedents that reflect each characteristic. The characteristics of medicine extracted from this paper are; There are ten factors, including the legitimacy of the essence of medical practice, timeliness of medical execution, dynamics of medical progress, diversity of medical effects, risk of medical invasion, non-uniformity of medical methods, limitations of medical capabilities, intervention of the medical subject, high degree of medical standards, and maldistribution of medical data.

높은 에너지 효율로 개선된 S-MAC 프로토콜을 이용한 센서 네트워크 시스템의 구현 (An Implemention for the Sensor Network System using S-MAC Protocol which is improved in Energy Consumption)

  • 한성덕;문호선;김용득
    • 전자공학회논문지CI
    • /
    • 제44권2호
    • /
    • pp.25-30
    • /
    • 2007
  • 무선 센서 네트워크에서는 기본적으로 교환이나 충전이 어려운 배터리로 동작하는 센서 노드들로 구성된다. 따라서 센서 노드들의 에너지 소모를 줄이는 것이 매우 중요하다. 본 논문에서는 근거리 무선 통신 기술인 지그비에 높은 에너지 효율을 갖도록 개선된 S-MAC 프로토콜을 이용하여 센서 네트워크 시스템을 구현하였다. S-MAC 프로토콜에서 활성 구간에서의 duty cycle을 줄임으로써 전력 소모를 줄이는 방법을 사용하여서 노드의 전력을 줄였다. 실험결과 제안된 알고리즘을 사용하면 S-MAC 프로토콜보다 약 $25\sim30%$정도의 에너지 소모를 줄이는 것으로 나타났다.

회절격자구조를 갖는 도파로 소자의 엄밀한 광선광학적 결합계수 계산 (Ray-optical determination of the coupling coefficients of waveguide gratings by use of the rigorous coupled wave theory)

  • 박선택;송석호;오차환;김필수
    • 한국광학회지
    • /
    • 제10권4호
    • /
    • pp.348-353
    • /
    • 1999
  • 엄밀한 결합파를 적용하는 광선광학적 방법에 의해, 임의의 격자구조를 갖는 도파로 회절소자의 결합계수를 계산하였다. 엄밀한 광선광학적 방법으로 다양한 격자구조(사각형, 정현파, 삼각형, 사다리꼴)에 대한 결합계수를 계산하였으며, 기존의 근사적 광선광학적 방법이나 결합모드 방법들과 비교 분석하였다. 특히, 사각형 격자의 경우에는 격자의 깊이 변화뿐만 아니라 격자영역비(duty-cycle)에 따른 결합계수를 구하였다. 엄밀한 광선광학적 방법은 강한 결합조건에서도 기존의 방법들에 비하여 도파로 회절격자의 결합계수를 매우 정확하게 결정할 수 있음을 확인하였다.

  • PDF

신품종 통일 벼(IR667)의 용수량측정시험 (Experiment for the duty of Water in paddy fields of New Variety Tongil (IR667))

  • 황은;김철규
    • 한국농공학회지
    • /
    • 제13권4호
    • /
    • pp.2439-2444
    • /
    • 1971
  • 기적의 법씨라 불리우는 통일(統一)(IR 667)의 출현(出現)으로 답용수량산출(畓用水量算出)에 변동(變動)이 생기지 않을까하여 본시험(本試驗)을 실시하였던바 다음과같은 사실(事實)을 알게되었다. (1) 엽수면증발량(葉水面蒸發量)과 증발계증발량(蒸發計蒸發量)의 비(比)는 식양토(埴壤土) ET/V=1.84, 양토(壤土) ET/V=2.00로 지금까지의 어느 품종(品種)보다 그 값이 컷다. (2) 생육기별(生育期別) ET/V를 볼 때 분약후기(分藥后期)와 유수형성기(幼穗形成期)에 $3.30{\sim}3.77$로 그 값이 커진다. (3) 증산비(蒸散比)는 식양토(埴壤土) 260.4, 양토(壤土) 275.0으로 모두 300이하(以下)이었다.

  • PDF

고승압비와 넓은 ZVS 영역을 갖는 비절연 DC-DC 컨버터 (A Non-isolated DC-DC Converter with High Step-up Ratio and Wide ZVS Range)

  • 박성식;최세완;최우진;이교범
    • 전력전자학회논문지
    • /
    • 제14권4호
    • /
    • pp.315-322
    • /
    • 2009
  • 기존의 부스트 컨버터는 출력 전압이 커질수록 스위치와 다이오드의 전압, 전류 스트레스가 커지고 다이오드 역 방향회복에 의한 서지로 인해 실제 사용 가능한 승압비가 제한된다. 본 논문에서는 고승압 응용에 적합한 새로운 비절연 부스트 컨버터를 제안한다. 제안한 컨버터는 듀티비 0.5로 약 6배의 승압비를 가지며 CCM에서도 ZVS 스위칭이 가능하므로 넓은 ZVS 영역을 갖는다. 또한 스위치와 다이오드 전압정격이 출력전압의 1/3로 작고 인터리빙이 가능하여 입출력 수동소자의 정격도 작다. 다이오드도 ZCS 턴오프 동작으로 인해 역방향 회복에 의한 서지가 거의 없다. 제안하는 컨버터의 동작원리를 설명하였고 이론적 해석과 시뮬레이션 및 실험을 통해 타당성을 검증하였다.

열전발전을 위한 DC-DC Converter의 입력측 전압·전류 센서없는 최대전력점 추적방식 (Maximum Power Point Tracking Method Without Input side Voltage and current Sensor of DC-DC Converter for Thermoelectric Generation)

  • 김태경;박대수;오성철
    • 한국산학기술학회논문지
    • /
    • 제21권3호
    • /
    • pp.569-575
    • /
    • 2020
  • 최근, 화석연료 고갈과 온실 가스 배출에 대한 우려가 높아지면서 신·재생 에너지 기술에 대한 연구가 주목을 받고 있다. 휴대용 전자기기 및 웨어러블 디바이스의 수요가 증가하고 IT기기들이 소형화되면서 배터리의 크기, 사용시간 등의 한계를 극복하기 위한 기술로 에너지 하베스팅이 있다. 본 논문에서는 열전소자의 V-I 특성곡선과 내부저항을 분석하고, 기존의 MPPT제어방식을 비교하였다. P&O제어방식은 열전소자의 전압, 전류를 측정하기 위한 센서 2개를 사용해야하기 때문에 경제적으로 비효율적이다. 따라서 본 논문에서는 출력전압 조절을 위한 센서1개만을 이용하여 MPP를 추적하는 새로운 MPPT제어방식을 제안한다. 제안하는 MPPT제어방식은 duty ratio와 부하의 출력전압의 관계를 이용하였으며, DC-DC Converter의 출력전압을 주기적으로 샘플링하여 duty ratio를 증가 또는 감소시켜 최적의 duty ratio를 찾아 MPP를 유지하도록 제어된다. DC-DC Converter는 Two-Switch 토폴로지인 Cascaded boost-Buck Converter를 이용하여 회로도를 설계하였다. 제안된 MPPT 제어방식은 PSIM 시뮬레이션을 이용한 모의실험을 통하여 검증하였고, 그 결과 열전소자의 V-I 특성곡선으로부터 얻어지는 MPP에서 전압×전류 및 전력값(V=4.2V, I=2.5A, P=10.5W)과 일치함을 확인하였다.

비선형 순시추종형 PWM 제어기법을 적용한 강압형 DC-DC 컨버터 (The Buck DC-DC Converter with Non-Linear Instantaneous Following PWM Control Method)

  • 김상돈;라병훈;이현우;김광태
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2002년도 전력전자학술대회 논문집
    • /
    • pp.470-475
    • /
    • 2002
  • Instantaneous following PWM control technique is pulsed nonlinear dynamic control method. This new control technique using analog integrator is proposed to control the duty ratio D of do-dc converter. In this control method, the duty ratio of a switch is exactly equal In or proportional to the control reference in the steady state or in a transient. Proposed control method compensates power source perturbation in one switching cycle, and the average value of the dynamic reference in one switching cycle. There is no steady state error nor dynamic error between the control reference and the average value of the switched variable. Experiments with buck converter have demonstrated the robustness of the control method and verified theoretical prediction. The control method is very general and applicable to all type PWM

  • PDF

강압형 컨버터의 비선형 순시추종 PWM 제어기의 특성 분석 (Characteristic Analysis of Buck Converter by using the Non-Linear Instantaneous Following PWM Controller)

  • 라병훈;김상돈;권순걸;이현우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.378-381
    • /
    • 2002
  • Instantaneous following PWM control technique is pulsed nonlinear dynamic control method. This new control technique using analog integrator is proposed to control the duty ratio D of DC-DC converter. In this control method, the duty ratio of a switch is exactly equal to or proportional to the control reference in the steady state or in a transient. Proposed control method compensates power source perturbation in one switching cycle, and the average value of the dynamic reference in one switching cycle. There is no steady state error nor dynamic error between the control reference and the average value of the switched variable. Experiments with buck converter have demonstrated the robustness of the control method and verified theoretical prediction. The control method is very general and applicable to all type PWM.

  • PDF