• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.321-326
• /
• 2017

We analyzed spectral data of the astrophysical diffuse emission obtained with the low-resolution spectroscopy mode on the AKARI InfraRed Camera (IRC) in the $1.8-5.3{\mu}m$ wavelength region. Advanced reduction methods specialized for slit spectroscopy of diffuse sky spectra have been developed, and a catalog of 278 spectra of the diffuse sky covering a wide range of Galactic and ecliptic latitudes was constructed. Using this catalog, two other major foreground components, the zodiacal light (ZL) and the diffuse Galactic light (DGL), were separated and subtracted by taking correlations with ZL brightness estimated by the DIRBE ZL model and with the $100{\mu}m$ dust thermal emission, respectively. The isotropic emission was interpreted as the extragalactic background light (EBL), which shows significant excess over the integrated light of galaxies at <$4{\mu}m$.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.12-17
• /
• 2013

Heavy metal contamination of soil and water from industrial sources remains a worldwide environmental concern. Concentrations of toxic metals were measured in soil from banks of the Han and Anyang rivers. Pre-monsoon samples contained the highest heavy metal concentrations (Cu > As > Pb > Cd > $Cr^{6+}$; up to 57.80, 38.23, 25.43, 2.21, 0.32 mg/kg, respectively), but concentrations decreased at all sites during the monsoon and post-monsoon seasons. Higher heavy metal concentrations in pre-monsoon samples may be attributed to dust pollution, especially from roads near the river. A gradual reduction in heavy metal concentrations during the rainy season may be due to washing out. The high concentration of metals could cause health problems, especially in residential areas.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.2
• /
• pp.185-193
• /
• 2004

A catalyst with CuO ceramic filter for simultaneous treatment of dust and HAP was prepared and characterized. Catalytic ceramic filter can not only potentially achieve the substantial savings in energy but provide with effective optimization and integration of process for simultaneous removal of SO$_2$, NO$_{x}$ and particulates from flue gases. Catalytic ceramic filters remove simultaneously particulates on exterior surface of filters and reduce NO to $N_2$ and $H_2O$ by SCR (Selective Catalytic Reduction) process. Preparation of catalyst impregnated ceramic filter with disk shape (Ψ 50) follow the processing of alumino-silicate ceramic filter, support impregnation and catalyst impregnation (copper oxide). Preparation routes of alumino-silicate catalyst carrier suitable for production of catalytic filters practically were studied and developed using the sol-gel and colloidal processing, homogeneous precipitation and impregnation method. Characterization of the catalyst, catalyst carrier catalytic filter materials have been performed the using various techniques such as BET, XRD, TGA, SEM. Combination of the sol-gel and colloidal processing and impregnation method is recommended to prepare catalyst carriers economically for catalytic filter applications.s.

• Journal of Environmental Science International
• /
• v.15 no.11
• /
• pp.1035-1043
• /
• 2006

Large scale of fish kills by red tides has been occurred every year in coastal water fisheries of Korea. To suppress red tide spreading out over the south coastal water of the Korean Peninsula large amount of loess has been applied every year because loess is known to be effective in removing red tide organisms. Effects of loess application in ecosystem of underwater near sea shore were investigated with some physical characteristics of loess. Loess used for the red tide reduction consisted of very fine particles, of which size was mostly less than 0.1 mm. Particles of loess blocked light penetration, which is essential for the underwater ecosystem. Loess also pushed pH down by the hydrolysis activities of aluminium and iron It was found that underwater ecosystems where loess was applied near sea shore were devastated. Sea plants such as sea weeds were gone leaving only their roots. Clams and snails were dead under the loess dust blanket. And fishes were not found at all where loess has been sprayed lot long time. It was found that even if loess has some capacity to reduce red tide temporarily, loess application should be slopped to protect underwater ecosystems.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.5
• /
• pp.1639-1648
• /
• 1996

Protection of gas turbine blade from its erosion and abrasion at high temperature and pressure is the first goal to cleanup the hot gas upstream for IGCC and PFBC. Ceramic filters represent an attractive technology for particle removal at high temperature and high pressure condition. They have demonstrated being a good system for improvement of thermal efficiency and reduction of effluent pollutants in advanced coal-based power systems such as IGCC and PFBC. Ceramic filter elements currently being developed were evaluated in the previous paper. In this paper, we measured the ash size and distribution on cleaning of ceramic candle filter. The results are as follows : in this experimental range, ceramic candle filter was shown to be fully adequate for the removal process of dust under high temperature and pressure. Also filtration efficiency of ceramic candle filter was higher than 98% compared with the regulation limit of particle size in gas turbine inlet.

• Journal of Veterinary Clinics
• /
• v.34 no.4
• /
• pp.245-248
• /
• 2017

Modified rush ASIT protocol has been performed to identify the ideal schedule that allows the dose considered effective to be reached in the shortest possible time with the fewest adverse effects. Ten atopic dogs of this study includes fulfillment of Favrot's criteria. Offending allergens were identified by the use of IDST. During the induction period, the dogs were received a total of 15 injections. Ten injections were administrated every 30 minutes in a day with gradually increasing amounts and concentrations of allergens, and the last 5 injections were administered every 3 days. Disease severity was quantified by using the canine atopic dermatitis extent and severity index (CADESI). During induction period, reduction rate from baseline scores varied between 1% and 67% and the improvement of ${\geq}50%$ was recorded after induction period of therapy for CADESI-03 score in 6 of the 10 dogs. This study of ten dogs with atopic dermatitis provide evidence for the efficacy and safety of modified rush ASIT for clinical improvement.

• Journal of ILASS-Korea
• /
• v.24 no.4
• /
• pp.178-184
• /
• 2019

Diesel engines have the advantages of higher thermal efficiency and lower CO2 emissions than gasoline engines, but have the disadvantages that particulate matter (PM) and nitrogen oxides (NOx) emissions are greater than those of gasoline engines. In particular, nitrogen oxides (NOx) emitted from diesel engines generates secondary ultrafine dust (PM2.5) through photochemical reactions in the atmosphere, which is fatal to humans. In order to reduce nitrogen oxides (NOx), pre-treatment systems such as EGR, post-treatment systems such as LNT and Urea SCR have been actively studied. The Urea SCR consists of an injection device injecting urea agent and a catalytic device for reducing nitrogen oxides (NOx). The nitrogen oxide (NOx) reduction performance varies greatly depending on the urea uniformity in the exhaust pipe. In this study, spray characteristics according to the spray hole structure were confirmed, and the influence of spray uniformity on spray characteristics was studied through engine evaluation.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.82-90
• /
• 1998

The study was carried out to investigate on the response of environmental sanitation problems in action of the volume based waste charge system in Seoul. The responses from the 396 persons who dwelled in Seoul was stimulatively answered, this system was considered as a successful one 69.6% of total answers, but little portion (21.2%) of those was unknown on the mean of this system. And we knew that this system was need to the communication and education through the press media about this one. After the action of the volume based waste charge system, the volume of refuse discharged in a day was decreased 30-50% than before. In the problems of environmental sanitation after this system, the number of sanitary insect(cockroach etc) and rat was decreased, also the production of order and dust caused by refuse was decreased in comparison with those before. This results were considered that the Separate Collection should be perfectly performed. In response, the regular envelope of refuge was serious problems, the improvement for this one was demanded, The kind of difficult refuse treated was waste foodstuffs> electric products> rubbers> furniture> bottles, cans>papers, pulps etc. and the next proposal for this system should be prepared. Conclusively, the volume based waste charge system should be remarkable system in terms of resources recycling as well as wastes reduction. Above all in order to conform this system the separate collection system should be systematically performed, the next improvable proposal of the detailed methods in this system should be prepared.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.82-86
• /
• 2013

The automotive weather strip has the functions isolating of dust, water, noise and vibration from outside. The core of weather strip is made of steel with stiffness. By using the wire formed as the core of weather strip, weight can be reduced as much as 35% by comparing with existing steel core. For this reason, forming wire is necessary to keep the zigzag shape as it is. The deformation which is occurred during forming process can be predicted and it can be used in case of manufacturing dies through CAE. In this paper, rolling process conditions are deduced and the springback amount is predicted after rolling process by using the simulation. The springback amount of product is measured by using optical microscope, and measurement result is compared with the simulation result of springback as the same condition. The suitable gap between dies to compensate springback after rolling process is predicted through simulation and it is used for manufacturing dies.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.140-146
• /
• 1998

Methods and systems to remove static electricity are requested necessarily because the static electricity causes a flammable gas explosion, a fire, reduction of production rate in manufacturing VLSI semiconductor device and so on. In this paper, abrasion and dust contaminant of needle electrode are studied experimentally. And, frequencies and pulse durations of a high frequency pulse source were controlled effectively to minimize the abrasion of needle electrode and control generated numbers of ions. As a result, it is verified experimentally that the ion generation of charge neutralizer increases by using a high frequency pulse source.