• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.358-366
• /
• 2019

본 연구는 현재 작업자의 경험과 감각에만 의존하고있는 표면 마감작업시간 판정을 Durometer 측정치와 Proctor 관입저항 시험치를 비교하여 응결시간 판정에 듀로미터를 활용함으로써 실무 구조체의 과학적이고 정량적인 표면 마감시간의 추정 가능성을 분석하고자 하였다. 연구 결과로 Durometer 측정치와 Proctor 관입저항 시험치는 상관성이 높다고 판단되어 콘크리트의 경우 초결 측정시에는 Durometer C type으로 42HD전후 일 때 표면 마감작업 개시가능 시간결정에, 종결 측정시에는 Durometer D type으로 10HD 전후일때 표면마감 한계시간, 양생개시 시간 등에 유용하게 사용할 수 있을 것으로 사료되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.73-74
• /
• 2020

In this study, the feasibility of the durometer into super retarding concrete was studied by comparing the penetration resistance with the hardness of each durometer using the penetration resistance and the improved Durometer and Durometer A-Type according to the ultra-delay mixture rate. The test results showed that initial setting time by improved Durometer and Durometer A-Type were fixed at 25, 50 HD, respectively, and the 35, 80 HD showed at final setting time. It was also found that the use of the durometer can be available to measure the setting time of the concrete.

• 대한건축학회논문집:구조계
• /
• 제35권9호
• /
• pp.143-150
• /
• 2019

본 연구는 고무경도계인 Durometer를 사용하여 콘크리트의 표면마감 작업시간 결정과 관련있는 응결시간을 판정하는 방법에 대하여 제안하고자 하였다. 연구의 결과로 Durometer 사용시 모르타르와 콘크리트의 두가지 요소 모두에서 Proctor 관입저항기와 높은 상관성이 있는 것으로 분석되어 Durometer를 사용한다면 콘크리트의 과학적이고 정량적인 응결시간을 확인 할수 있을 것이라 판단된다. 따라서 Durometer C 타입의 경우는 초결 측정으로 40 HD로 하여 마감작업 가능 시간결정에, D 타입의 경우는 10 HD로 하여 종결시간 측정으로 마감작업의 한계시간, 양생개시 시간 확인 등에 유용하게 활용될 수 있는 것으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.87-88
• /
• 2020

The purpose of this study is to explore the possibility of estimating optimum surface finish time of the fresh concrete placed at the job site by applying a surface hardness test meter(Durometer). Tests are carried out by measuring and comparing the Penetration resistance test and hardness test by Durometer. Penetration resistance tester and improved Durometer are similar, but the higher the temperature, the higher the setting time, and the higher the correlation was shown. When the hardness value of the improved Durometer is about 50 HD, it is found that the initial and 80 HD represent the end. It is expected that this will be useful in determining the finish time of the surface at the actual site.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.169-170
• /
• 2020

The purpose of this study is to explore the possibility of estimating optimum surface finish time of the fresh concrete placed at the job site by applying a surface hardness test meter(Durometer). Tests are carried out by measuring and comparing the Penetration resistance test and hardness test by Durometer. Penetration resistance tester and improved Durometer are similar, but the higher the temperature, the higher the setting time, and the higher the correlation was shown. When the hardness value of the improved Durometer is about 50 HD, it is found that the initial and 80 HD represent the end. It is expected that this will be useful in determining the finish time of the surface at the actual site.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.238-239
• /
• 2019

In this study, it was intended to confirm the possibility of using the Durometer in estimating the setting time by comparing the Proctor penetration resistance with the Durometer type A of hardness in concrete substituting CBS Dust. With the hardness of Durometer type A, it is expected to be used conveniently in the field of practice as it is determined to be about 18 HD for the initial determination and 31 HD for the end measurement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.118-119
• /
• 2019

In this study, we compared the proctor penetration resistance test value of the concrete using CGS for Fine Aggregate and the hardness value of the Durometer. The results are summarized as follows. 1) Surface finish The Durometer C type setting time measurement value was about 45 HD, and the hardness value of the Durometer D type was about 5HD. 2) The proctor penetration resistance test value and the hardness value of the Durometer are highly correlated and are expected to be easy to use.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.187-188
• /
• 2018

For the concrete construction, finishing process is inevitable for crack control and improving permeability. The finishing process is closely related with setting time, but currently, the timing of the finishing process is not managed with scientifically but feeling of the workers. In this research, therefore, by comparing with the setting time measured with penetrating method, the feasibility of durometer for measuring setting time was analyzed. As a result, there was a high relationship between setting time measured with penetration method and durometer. Therefore, it is expected that using durometer can be a good solution for assessing setting time for finishing process.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.116-117
• /
• 2019

In this research, Proctor insertion resistance test values and Durometer A type hardness values were compared and analyzed between the setting times of the concrete using CGS for Fine Aggregate, and the results are summarized as follows. 1) The Proctor penetration resistance test value and the hardness value of Durometer A type showed a high correlation in the form of a curve. 2) About surface finish The resolution exceeding the hardness value of the Durometer A type uses about 25 HD, and in the case of termination, about 35 HD, and is considered to be effective for determining the surface finishing work time. The possibility to do is expected.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.81-82
• /
• 2019

In this study, the Proctor penetration resistance test value and the hardness value of the improved Durometer were compared and analyzed for the change in the FA replacement rate of the concrete using CGS fine aggregate. The results are summarized as follows. It is. 1) The Proctor penetration resistance test value and the hardness value of the improved Durometer showed a high correlation in the form of a curve. 2) About surface finish Super-resolution with the improved Durometer is considered to be useful when using about 50 HD and about 80 HD in the end to determine the surface finishing work time.