• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.211-214
• /
• 2005

Recently, Deterioration of the concrete sewer concrete structures by biochemical corrosion has been issued and a development of the inhibition system of corrosion that has been demanded. The sulfuric acid may react with the hardened cement paste and originate expansive products which can induce swelling and breakless of concrete. Also, a sulphuric acid reacts with calcium hydroxide to from $CaSO_4\;\cdot\;2H_2O$. This reaction accounts for consumption of the calcium hydroxide present in hardened cement paste. In this study, To present from biochemical corrosion of the sewer repair mortar that was spread with liquefied antibiotic and then its experimental properties were experimentally investigated and to estimate the effect of absorbed condition of restorative mortar, the number of coating times and coating contents with antibiotic on the durability properties of restorative mortar spread with antibiotics. Also, testing items such as carbonation depth, choloride ion penetration depth and chemical resistance was tested to estimate the durability properties in third study. In results, the novellus bacillus inhabiting in sewer concrete structures was restrained by antibiotics developed in this study. And carbonation depth, choloride ion penetration depth and chemical resistance of restorative mortar spread with antibiotics was superior to that of plain mortar.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권1호
• /
• pp.66-71
• /
• 2018

Purpose: Performance recovered from SCR through cleaning was studied, measuring differential pressure, NOx reduction efficiency, fuel consumption and engine power before and after cleaning. Ideal cleaning intervals are proposed based on SCR mileage and differential pressure. SCR endurance and reliability improvements through cleaning were studied through physicochemical testing of SCR durability at 43,000km 50,000km, and 110,000km respectively. Methods: Engine power, fuel consumption and exhaust gas were measured using engine full load tests and ND-13 MODE by installing the SCR before cleaned at total engine mileages of 400,000 km, 300,000km and 200,000km. The same tests were performed after cleaning the SCR catalytic converter. Endurance and reliability of the SCR cleaning was studied through the same test by SCR catalyst after each 43,000km 50,000km, 110,000km, durability test on SCR cleaning. Conclusion: We confirmed the low-performance of the SCR due to clogging is restored by SCR cleaning technology. The NOx reduction efficiency was restored to 82%, 86% and 88% from 69%, 72% and 79%. As well as the NOx reduction efficiency, it was confirmed that the engine power, fuel consumption and back pressure was restored to fresh SCR levels. As a result of the durability and reliability achieved through SCR cleaning, we confined the appearance and reduction efficiency through visual inspection and ND-13 MODE are similar to new SCR catalysts. Finally, it was judged that there was no change in performance even when driving the SCR without cleaning throughout the 100,000 km mileage warranty.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.215-221
• /
• 2014

본 논문에서는 RF 고전력 스트레스에 의한 SAW 디바이스의 신뢰성 분석을 위하여 향상된 내전력 시험시스템 및 시험방법을 제안하고 고장분석을 통해 고장메카니즘을 분석하였다. 광학현미경, SEM(Scanning Electron Microscope) 및 EDX(Energy Dispersive X-ray Spectro-scopy)장비를 이용하여 고장 분석한 결과, SAW 디바이스의 고장메카니즘은 고전류 밀도 및 고온 조건에서 줄열에 의한 Electromigration으로 분석하였다. Electromigration은 IDT전극에 void와 hillock을 생성하고, 그 결과로 전극이 단락과 단선되어 삽입손실이 증가하는 것이다. 제안된 내전력 시험시스템과 방법을 이용하여 450MHz CDMA용 SAW 필터의 가속수명시험을 수행하고, 아이링 모델과 와이블 분포를 이용하여 SAW 필터의 $B_{10}$수명은 98,500시간으로 추정하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권5호
• /
• pp.27-33
• /
• 2014

전기저항은 콘크리트의 내구성을 판단하기 위하여 빠르고 간단히 측정하여 활용될 수 있으나, 탄산화가 진행되면 콘크리트의 미세구조가 크게 변화하기 때문에 측정의 오차를 초래한다. 본 연구의 목적은 콘크리트의 탄산화가 전기저항에 미치는 영향을 분석하고 정량화 하는데 있다. 다양한 물시멘트비 조건에서 시험편을 제조하여 330일동안 탄산화 촉진을 시키면서 전기저항의 변화율을 고찰하였다. 탄산화된 콘크리트에서 전기저항 측정치가 높은 것으로 나타났으며, 이러한 경향은 탄산화가 진행됨에 따라 더욱 뚜렷한 경향을 보였다. 전기저항과 탄산화깊이와의 상관관계를 도출하였으며, 기중 상태 대비 탄산화된 콘크리트의 전기저항 비율은 일정한 탄산화깊이까지는 급격히 낮아지는 경향을 보였으나, 포화상태 대비 탄산화된 콘크리트의 전기비율은 탄산화 깊이와 선형관계를 보였다. 본 연구를 토대로 탄산화로 인하여 전기저항치의 측정오차를 보정할 수 있는데 실질적으로 활용될 수 있을 것으로 기대된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.525-528
• /
• 2008

건전하게 시공된 콘크리트는 충분한 내구성으로 장기수명을 갖는 것으로 알려졌다. 그러나 대다수의 콘크리트 표면에 존재하는 균열은 염소이온의 침투에 대한 빠른 침투 통로가 되어 내구성능을 저하시키는 것은 분명하다. 균열이 발생한 콘크리트의 수명을 연장하기 위한 중요한 사항은 염소이온으로 인한 부식의 위험성을 재고하는 것이다. 균열폭은 높은 철근비로 감소시킬 수 있으나, 실질적으로 균열이 발생한 콘크리트의 내구성 저하이다. 이처럼 균열폭이 작은 경우, 표면도장공법은 균열이 발생한 콘크리트의 내구성을 간단히 향상시킬 수 있는 하나의 방안으로 고려될 수 있다. 따라서, 다양한 표면도장공법이 균열이 발생한 콘크리트를 실링할 수 있는지에 대한 검토가 필요하다. 본 연구는 이와 같이 표면도포공법이 미세균열을 통한 염소이온 침투에 미치는 영향을 실험적 측면에서 고찰하고자 하였다. 실험변수로 침투재와 도포재의 단일 적용과 복합적용이 실험변수로 고려되었으며, 급속염소이온 침투 실험을 통하여 균열대비 염소이온 침투깊이를 검토하였다.

• 한국재난정보학회 논문집
• /
• 제8권4호
• /
• pp.391-400
• /
• 2012

최근 건설 산업에서 FRP는 재료적 장점들 때문에 구조물의 보강 재료로서 많이 사용되어지고 있다. FRP 외부부착보강은 중량에 비하여 높은 강도 및 강성, 우수한 내구성과 시공성 등 여러 가지 장점을 가지는 공법이다. 그러나 외부부착보강은 구조물이 투수성이 낮은 보강재로 밀폐되고 수분이 외부로 배출되지 못함으로 인하여, 장기적인 구조물의 손상을 발생시키는 문제점이 있다. 본 연구에서는 인발성형으로 제작되었으며, 기존의 FRP와 재료역학적 성질은 동등하면서 투수성을 지녀 구조물의 내구성, 부착성능에 유리한 유리섬유패널(GP)에 대해서 정적실험을 통해 실험체의 반복하중 하에서의 하중-처짐 선도, 파괴형태, 하중-변형율 관계 등을 조사하였다. 실험결과 2,000,000회 피로실험 후에도 파괴에 도달하지 않았으며, 보의 처짐이나 콘크리트 압축변형률이 기준 콘크리트 시험체보다 현저히 낮은 것으로 측정되어 장기 부착력 및 장기 내구성능이 우수함을 알수 있었다.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.3587-3595
• /
• 2015

본 연구에서는 저비용의 저심도 도시철도시스템을 구축하기 위하여 산업부산물인 고로슬래그 미분말, 플라이애시 및 급냉 전기로 산화슬래그를 사용하여 개발된 저탄소 친환경 PC 박스용 콘크리트의 역학적 성능 및 내구성을 평가 하였다. 역학적 특성을 평가한 결과, 재령 1일 압축강도는 모든 조건에서 설계기준강도($f_{ck}$) 35MPa의 90% 이상 강도 발현 하는 것으로 나타나 공기단축 가능으로 건설비용을 절감할 수 있을 것으로 판단된다. 또한, 소요의 물성 및 설계기준강도($f_{ck}$) 35MPa를 만족하는 범위에서 시멘트 단독 사용 조건보다 염소이온침투성 및 확산계수가 낮게 나타나 내염성능이 우수한 것으로 나타났으며, 동결융해 저항성 및 화학저항성의 경우에도 내구성능이 우수한 것으로 나타났다. 따라서 저탄소 친환경 PC 박스용 콘크리트를 사용할 경우, 시멘트 제조 시 발생되는 이산화탄소 및 환경부하를 저감할 수 있을 것으로 기대된다.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.43-55
• /
• 2016

PURPOSES : This study aims to develop a repair material that can enhance pavement performance, inducing rapid traffic opening through early strength development and fast setting time by utilizing MgO-based patching materials for repairing road pavements. METHODS : To consider the applicability of MgO-based patching materials for repairing domestic road pavements, first, strength development and setting time of the materials were evaluated, based on MgO to $KH_2PO_4$ ratio, water to binder ratio, and addition ratio of retarder (Borax), by which the optimal mixture ratio of the developed material was obtained. To validate the performance of the developed material as a repair material, the strength(compressive strength and bonding strength) and durability (freezing, thawing, and chloride ion penetration resistance) was checked through testing, and its applicability was evaluated. RESULTS : The results showed that when an MgO-based patching material was used, the condensation time was reduced by 80%, and the compressive strength was enhanced by approximately 300%, as compared to existing cement-based repair materials. In addition, it was observed that the strength (compressive strength and bonding strength) and durability (freezing and thawing, and chloride ion penetration resistance) showed an excellent performance that satisfied the regulations. CONCLUSIONS : The results imply that an emergent repair/restoration could be covered by a rapid-hardening cement to meet the traffic limitation (i.e. the traffic restriction is only several hours for repair treatment). Furthermore, MgO-based patching materials can improve bonding strength and durability compared to existing repair materials.

• 한국태양에너지학회 논문집
• /
• 제37권4호
• /
• pp.35-47
• /
• 2017

Energy efficiency solutions are being pursued as a sustainable approach to reducing energy consumption and related gas emissions across various sectors of the economy. Vacuum Insulation Panel (VIP) is an energy efficient advanced insulation system that facilitates slim but high-performance insulation, based on a porous core material evacuated and encapsulated in a barrier envelope. Although VIP has been applied in buildings for over a decade, it wasn't until recently that efforts have been initiated to propose and adopt a global standard on characterization and testing of VIP. One of the issues regarding VIP is its durability and aging due to pressure and moisture dependent increase of the initial low thermal conductivity with time; more so in building applications. In this paper, the aging of commercially available VIP was investigated experimentally; thermal conductivity was tested in accordance with ISO 8302 standard (guarded hot box method) and long-term durability was estimated based on a non-linear pressure-humidity dependent equation based on study of IEA/ECBCS Annex 39, with the aim of assessing durability of VIP for use in buildings. The center-of-panel thermal conductivity after 25 years based on initial 90% fractile with a confidence level of 90 % for the thermal conductivity (${\lambda}90/90$) ranged from 0.00726-0.00814 (W/m K) for silica core VIP. Significant differences between manufacturer-provided data and measurements of thermal conductivity and internal pressure were observed.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.163-170
• /
• 2019

Durability of instrument is one of the most important factor to ensure accurate treatment and decrease failure for the orthopedic surgical operation. Normally, a set-screw driver tip has been processed with hard coating for their higher durability and wear resistance. And several surface modification methods were obtained such as titanium nitride (TiN) coating, diamond like carbon coating, other nitriding, and etc. In this study, we have surface modified on set-screw driver tip with TiN and DLC, investigated whether the TiN and DLC coatings affect the mechanical properties and durability of the set-screw driver tip in the pedicle screw system. The surface morphologies were observed with scanning-electron microscopy (SEM), and the static/dynamic torsional properties were investigated with universal testing machine based on ASTM F543. Coating thickness of each coatings were commonly around $1^{\circ}C$. Static torsional stiffness, and ultimate torque values for DLC and TiN coated samples were significantly higher than those of non-coated sample by the pared T-test. Surface morphology of after the dynamic torsional test was more clean with less scratch or friction traces from DLC coating than that of TiN coating and non-coated sample.