• 콘크리트학회논문집
• /
• 제18권2호
• /
• pp.219-226
• /
• 2006

본 연구에서는 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 압축, 휨 및 충격강도, 흡수율 및 동결융해저항성에 미치는 결합재 첨가량 및 PA 혼입량의 영향에 대하여 연구하였다. 그 결과 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 압축, 휨 및 충격강도는 PA 혼입량에 관계없이, 결합재 첨가량 및 충전제 혼입량의 증가에 따라 증가하는 경향을 나타냈다. 하지만, PA 혼입량의 증가에 따라서는 감소하는 경향을 보였다. 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 흡수율은 PA 혼입량에 관계없이, 결합재 첨가량의 증가에 따라 감소하는 경향을 나타냈다. 하지만 PA 혼입량의 증가에 따라서는 증가하는 경향을 나타냈다. 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 내구성 지수는 결합재 첨가량의 증가에 따라 증가하였으나, PA 혼입량에 따라서는 감소하는 경향을 보였다.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.17-23
• /
• 2006

Rubber materials have the nonlinear, large deformation and viscoelastic behavior. W.D. Kim et al. studied these characteristics through the static, fatigue, dynamic, aging and viscoelastic test. This paper discussed that the properties of engine mounting rubber, such as static stiffness, fatigue life and damping factor, are predicted based on CAE by using material properties acquired by the report of Kim et al. In result, the static stiffness of engine mounting rubber is predicted approximately in comparison with test value. Also, it was confirmed that the relationship of fatigue life and Green-Lagrange strain in specimen was the valid tool to predict the fatigue life of engine mounting rubber. From the results of transient viscoelastic analysis the damping factor changed rapidly at the range less than 8hz.

• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.157-166
• /
• 2005

This article involves architecting prototype-fuzzy expert system for designing the nominal cover thickness by means of fuzzy inference for quantitatively representing the environment affecting factor to reinforced concrete in chloride-induced corrosion environment. In this work, nominal cover thickness to reinforcement in concrete was determined by the sum of minimum cover thickness and tolerance to that defined from skill level, constructability and the significance of member. Several variables defining the quality of concrete and environment affecting factor (EAF) including relative humidity, temperature, cyclic wet and dry, and the distance from coast were treated as fuzzy variables. To qualify EAF the environment conditions of cycle degree of wet-dry, relative humidity, distance from coast and temperature were used as input variables. To determine the nominal cover thickness a qualified EAF, concrete grade, and water-cement ratio were used. The membership functions of each fuzzy variable were generated from the engineering knowledge and intuition based on some references as well as some international codes of practice.

• International Journal of Concrete Structures and Materials
• /
• 제19권1E호
• /
• pp.41-48
• /
• 2007

Addition of latex to concrete is known to increase its durability and permeability. The purpose of this study is to analyze air void systems in latex-modified concretes using a reasonable and objective method of image analysis with such experimental variables as water-cement (w/c) ratios, latex contents (0%, 15%) and cement types (ordinary portland cement (OPC), high-early strength (HES) cement and very-early strength (VES) cement). The results are analyzed by spacing factor, air volume (content) after hardening, air void distribution and structure. Additionally, air void systems and permeability of latex-modified concrete (LMC) are compared by a correlation analysis. The results are as follows. The LMC of the same w/c ratio showed better air entraining (AE) effect than OPC with AE water reducer. The VES-LMC showed that the quantity of entrained air below $100{\mu}m$ increased more than four times. For the case of HES-LMC, microscopic entrained air between the range of 50 to $500{\mu}m$ increased greater than 7 times even in the absence of anti-foamer. Although spacing factor was measured rather low, the permeability of latex-modified concrete was good. It is construed that air void system does not have a considerable effect on the property of latex-modified concrete, but latex film (membrane) has a definite influence on the durability of LMC.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권3호
• /
• pp.139-144
• /
• 2015

Track drive unit adopted in the small sized excavator generally have been used in the construction equipment under the 10 tons as the driving device with forwarding and reversing of excavator. It is required to study the accelerated life test applied by over torque and speed to test the durability life test reflected the many driving modes of small sized excavator and also need to equip the comprehensive performance and life test equipments to do the various performance tests. This study had analyzed the failure modes of the components, and calculated the equivalent loads investigated the used loads in the real field conditions and elicits the acceleration factor adopted in the inverse power model. Also, this study have considered the changes of the acceleration factor and the durability test time in the case of the rotary group and the bearing through analyzing the main failure modes. It was calculated the no failure test time about 2 samples and confidence level 90% and elicited the accelerated life time 720 hours.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.225-228
• /
• 2005

This paper was accomplished for analyzing the reason of the above deterioration happened on the deck of concrete bridge. The bridge was constructed at 660m above the sea level having more freezing and snowing days. Therefore, it is placed on the particular condition sprinkling $CaCl_2$ enough for keeping up with moderate traffic condition. When it is considered to the former condition, the bridge can be assumed to potentialities for combined deterioration with freezing-thawing under sprinkling deicing chemical. Core specimens were gathered from the concrete deck for clearing the reason of the above deterioration exactly, and it is used for various tests for measuring the compressive strength, elastic modulus, content of $Cl^-$, freezing-thawing at the fresh and salt water. As a result of freezing-thawing test, the specimen at the fresh water has over 90$\%$ of durability factor, but another specimen at 1$\%$ of salt water has 0$\%$ of durability factor at 140 cycles of the freezing-thawing. The result means that frost damage is sccelerated at the salt water. Therefore, the deterioration of the concrete deck is estimated to be occured by combined effects of freezing-thawing and chloride ion attack.

• 농촌계획
• /
• 제20권4호
• /
• pp.89-99
• /
• 2014

The purpose of this research is first, to define what measurement items in terms of subjective consideration and preference can be used to assess the landscape values of agriculture and fisheries heritage, and second, to understand the perceptive patterns particularly how landscape experts weigh up the importance of the each measurement item. In order to extract the measurement items, extensive literature review was performed including research documents as well as domestic and international policy reports. A survey targeting the experts was conducted to ask their opinions on the importance of the selected items. For the analysis, SPSS 20.0 for Windows was used to carry out reliability analysis, descriptive statistics such as arithmetic mean and frequency distribution, factor analysis, and multiple linear regression modeling. The results are: the importance value of the landscape values in agriculture and fisheries heritage was 4.1494; the ratio value that the experts perceived the importance was 87.2%; and the average of the importance value of the analyzed items was 3.71. All the items have more than 3.00. Ten factor groups were summarized and defined whose total explanation power was 67.86%. The factor groups were named as lyricism, authenticity, environmentally-friendliness, durability, recognizability, regionality, visibility, value of sightseeing, social image, and universality. The factors influencing the landscape values are, in order of importance, recognizability, authenticity, visibility, universality, durability, and nativeness. According to the analysis, however, environmentally-friendliness, regionality, value of sightseeing, and social image were not as important.

• 한국융합학회논문지
• /
• 제6권1호
• /
• pp.93-101
• /
• 2015

철도차량에서의 축은 안전한 운행을 하기 위해서는 중요한 역할을 함으로서 그 강도 및 내충격성, 재질, 안전계수, 응력 및 변형이 고려되어야 한다. 본 연구에서는 Model 1과 Model 2의 시뮬레이션 모델들이 있다. 이 모델들은 CATIA와 ANSYS로 설계, 구조 및 피로 해석을 통한 융합 기술을 수행함으로서 연구된다. Model A의 최대 변형량과 최대 등가응력이 Model B보다 더 작음으로서 Model A가 Model B보다 내구성을 더 가지고 있다. 본 연구 결과를 철도 차량의 부품 설계에 응용함으로서 파손을 방지하기 위한 내구성이 고찰될 수 있다. 그리고 디자인 면에서의 융합 기술로의 접목도 가능하여 미적인 감각을 나타낼 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1029-1034
• /
• 2001

The purpose of this research is to develop rapid setting cement latex modified concrete (RSLMC) which will be used to overlay bridge deck for maintaining and repairing. The main experimental variables were the types of rapid setting cement and variation of latex and antifoam agent contents were selected as admixture factor, then the properties of workability and strength development and durability properties were investigated. The results of this study show that latex content give increment of a slump due to surface tension in polymer particles and reduce unit weight of water for preservation of workability. In addition, When no and 1.6~3.2% antifoam agent were mixed, 8%, 2.0~3.8% were respectively obtained. An increasing the amount of latex produced concrete with increased flexural strength, but with slightly lower compressive strength. Rapid chloride permeability and freezing-thawing test carried out. As a results, according to increment of containing ratio antifoamer, strength of RSLMC increase, permeability showed lower value than ignorable 100 coulombs. Also, in the case of more than antifoamer 1.6%, the relativity dynamic modulus is mantained more than 90%, but in case of 0, 5%, it decrease. In consequence, with the view of strength and workability of RSLMC, it is considered that appropriate content ratio of antifoam agent and latex solid are respectively 1.6% by latex weight, 15% by cement weight.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.143-150
• /
• 2007

Ring and cylinder bore wear may not be a problem in most current automotive engines. However, a small change in ring face and cylinder bore diameter can significantly affect the lubrication characteristics and ring axial motion. This in turn can cause to change inter-ring pressure, blow-by and oil consumption in an engine. Therefore, by predicting the wear of piston ring face and cylinder bore altogether, the changed ring end gap and the changed volume of gas reservoir can be calculated. Then the excessive oil consumption can be predicted. Here, the oil amount through top ring gap into combustion chamber is estimated as engine oil consumption. Furthermore, the wear theories of ring and cylinder bore are included. The changed oil consumption caused by the new end gap and the new volume of oil reservoir around second land, can be calculated at some engine running interval. Meanwhile, the wear amount and oil consumption occurred during engine durability cycle are compared with the calculated values. The wear data of rings and cylinder bore are obtained from three engines after engine durability test. The calculated wear data of each part are turn out to be around the band of averaged test values or a little below. It is shown that the important factor regarding oil consumption increasement is the wear of ring face.