Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

Prediction of Durability, Static and Dynamic Properties on Rubber

엔진마운트 고무부품의 내구 평가 및 동적 특성 예측

  • 김춘휴 (쌍용자동차 CAE팀) ;
  • 김기주 (쌍용자동차 CAE팀) ;
  • 정효태 (강릉대학교 금속재료공학) ;
  • 김철웅 (고려대학교 기계공학과 & 유앤아이(주) 고려대연구소) ;
  • 손일선 (오산대학 자동차기계계열.성장동력 특성화사업단) ;
  • 김중배 (동양공업전문대학 기계설계과)
  • Published : 2006.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Rubber materials have the nonlinear, large deformation and viscoelastic behavior. W.D. Kim et al. studied these characteristics through the static, fatigue, dynamic, aging and viscoelastic test. This paper discussed that the properties of engine mounting rubber, such as static stiffness, fatigue life and damping factor, are predicted based on CAE by using material properties acquired by the report of Kim et al. In result, the static stiffness of engine mounting rubber is predicted approximately in comparison with test value. Also, it was confirmed that the relationship of fatigue life and Green-Lagrange strain in specimen was the valid tool to predict the fatigue life of engine mounting rubber. From the results of transient viscoelastic analysis the damping factor changed rapidly at the range less than 8hz.

Keywords

References

  1. W. D. Kim, C. S. Woo and W. S. Kim, 'Development of Integrated Design System for Mechanical Rubber Components,' National Research Laboratories Project Report, Korean Institute of Machinery & Materials, 2004
  2. H. Y. Kim and J. J. Kim, 'Optimized Shape Design and Endurance Life Prediction of Engine Mount Rubber,' KSAE, Vol.18, No.6, pp.23-32, 1996
  3. J. H. Choi, H. J. Kang, H. Y. Jeong and T. S. Lee, 'Heat Aging Effects on the Material Property and the Fatigue Life of Vulcanized Natural Rubber and Fatigue Life Prediction Equations,' J. of Mechanical Science and Technology, Vol.19, No.6, pp.1229-1242, 2005 https://doi.org/10.1007/BF02984044
  4. H. Kim and H. Y. Kim, 'Formulation of Tearing Energy for Fatigue Life Evaluation of Rubber Material,' Journal of KSAE, Vol.29, No.8, pp.1132-1138, 2005 https://doi.org/10.3795/KSME-A.2005.29.8.1132
  5. J. J. Kim and H. Y. Kim, 'Shape Optimization of Engine Mount Rubber Using Shape Parameter Method,' Transactions of KSAE, Vol.2, No.2, pp.33-41, 1993
  6. J. J. Kim, H. Y. Kim and C. Choi, 'Computer Aided Shape Design of Engine Mounting Rubber,' SAE Conference, Oct. 25-27, Dearborn, Michigan (93MJA84) 1993
  7. T. Scharnhorst and T. H. Pian, 'Finite Element Analysis of Rubber-like Materials by a Mixed Model,' Int. J. Num. Meth. Eng., Vol.12, pp. 665-676, 1978 https://doi.org/10.1002/nme.1620120410
  8. B. Haggblad and J. A. Sundberg, 'Large Strain Solutions of Rubber Component,' Comp. Struct. Vol.17, pp.835-843, 1983
  9. S. R. Swanson, L. W. Christensen and M. Ensign, 'Large Deformation Finite Element Calculations for Slightly Compressible Hyperelastic Materials,' Comput. Struct. Vol.21, pp.81-88, 1985 https://doi.org/10.1016/0045-7949(85)90231-7
  10. Ajit K. Mal, Sarva Jit Singh, 'Deformation of Elastic Solids,' Prentice Hall PTR, 1990
  11. 'Physical Testing methods for vulcanized rubber,' Korean Industrial Standard M 6518, 1996
  12. 'Standard Test Methods of Vulcanized Rubber and Thermoplastic Elastomers -. Tension,' ASTM D412, 1998
  13. J. Day and K. Miller, 'Equibiaxial Stretching of Elastomeric sheets, an Analytical Verification of and Experiment Technique,' ABAQUS Users Conference Proceeding (June), pp.205-220, 2000
  14. C. S. Woo, W. D. Kim, W. S. Kim and J. D. Kwon, 'Effects of Maximum Strain and Aging Conditions on the Fatigue Life of Vulcanized Natural Rubber,' Trans. KSAE, Vol.12, No.4, pp.181-190, 2004
  15. C. Woo, W. Kim and J. Kwon, 'A Study on the Fatigue Life Predition and Evaluation of Rubber Components for Automotible Vehicle,' Transactions of KSAE, Vol.13, No.6, pp.56-62, 2005
  16. C. Woo, W. Kim, W. Kim and J. Kwon, 'Effects of Maximum Strain and Aging Conditions on the Fatigue Life of Vulcanized Natural Rubber,' Transactions of KSAE, Vol.12, No.4, pp.181-190, 2004