• Journal of Korean Society of Steel Construction
• /
• v.28 no.5
• /
• pp.373-382
• /
• 2016

Painting or thermally sprayed metal coating is often used in corrosion protection of steel structures. In recently, duplex coating system which combines thermally sprayed metals with paint is selected as a new generic type of coatings on steel structures under the highly corrosive environments. In this study, the structural steel specimens were surface treated, thermally sprayed with zinc, zinc-15%aluminum alloy, aluminum and aluminum-5%magnesium alloy, and finally sealing or painted with acrylic urethane. And as a reference specimens, steel specimens were painted with acrylic urethane after surface treatment. Circular defects with 1.0, 3.0 and 5.0 mm in diameters and line defect with 2.0 mm width, which reach the steel substrate were created on all specimens. The specimens were exposed into an environmental testing chamber controlled by the ISO 20340, which is a laboratory cyclic accelerated exposure test condition of spraying/UV/low temperature, for up to 175 days. Based on the corrosion tests, corrosion deterioration from the initial defects were evaluated and weathering performance of the specimens are compared.

• Journal of Welding and Joining
• /
• v.33 no.5
• /
• pp.20-25
• /
• 2015

Clad steel has good corrosion resistance and mechanical properties arising from the hot rolling of dissimilar metals, such as carbon steel and stainless steel. However both good corrosion resistance from the cladding plate material(stainless steel) and mechanical properties from the base plate material (carbon steel) are difficult to obtain because the different steels display opposite behaviors during the cladding process. In order to make clad steel for application in the hulls of ships, proper materials selection and heat-treatment conditions are necessary. In this study, mechanical properties of base plate materials with different chemical composition were evaluated according to heat condition of cladding plate material.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.26-35
• /
• 1997

In this paper, a VHDL implementation method for the internet protocol (IP) placed on top of ATM, so called IP over ATM, is presented. The proposed implementation method employs a parallel processing architecture to reduce the processing time and offers 155.52Mbps (STM-1) interface with the full-duplex mode for the ATM-based network. Furthermore, in order to minimize the search time for the table look-up, a LANCAM-based structure combining the routing table with the ATMARP table is proposed. The VHDL simulation results show that this proposed method can transmit (receive) at 155.52Mbps with delays of 48.5 clocks (29.5clocks).

• Biomolecules & Therapeutics
• /
• v.2 no.1
• /
• pp.28-33
• /
• 1994

In order to obtain insight into the repair mechanism of DNA containing thymine photo-dimer, the conformation of the duplex d(GCGGTTGGCG).d(CGCCAACCGC) with a thymine dimer incorporated has been studied by proton NMR. NOE data show that, although the local environment around the thymine dimer is altered, the gross structural changes are relatively small. T$_4$endonuclease V exhibited a conformational change on complex formation with DNA. This conformational change occurred around histidine 16 which was close to tyrosine 129 located in the aromatic segment (WYKYY) near the C-terminus. It is likely that the interaction between T$_4$endonuclease V and DNA is strong since the complex was not dissociated up to 1.6 M NaCl.

• Journal of the Korean Ceramic Society
• /
• v.28 no.11
• /
• pp.926-934
• /
• 1991

The effect of aggregates on the forming and sintering behaviors of BaTiO3 was studied. Aggregates and deaggregates of fine crystallite were obtained by thermal decomposition of oxalate coprecipitates and subsequently crushing them with a press, respectively. Large voids formed by packing of aggregates were not easily eliminated despite the successive destruction of aggregates with increasing forming pressure. As a result, compacts of aggregates showed inhomogeneity with larger mid-pore size and broader pore size distribution with respect to those of deaggregates. This inhomogeneity caused differential shrinkage and consequental internal stress, which retarded densification. The differential sintering increased the size of mid-pores in the initial stage, and formed duplex structure composed of dense region with abnormally grown grains and porous region with fine grains. The driving force of this abnormal grain growth shown in the specimens of aggregates was attributed to the minimization of the elastic strain energy due to internal stress.

• Molecules and Cells
• /
• v.26 no.3
• /
• pp.308-313
• /
• 2008

In animals, microRNAs (miRNAs) and small interfering RNAs (siRNAs) repress expression of protein coding genes by assembling distinct RNA-induced silencing complexes (RISCs). It has previously been shown that passenger-strand cleavage is the predominant mechanism when siRNA duplexes are loaded into Argonaute2 (Ago2)-containing RISC, while an unwinding bypass mechanism is favored for miRNA duplexes with mismatches. Here I present experimental data indicating that some mammalian miRNAs are assembled into Ago2-containing RISC by cleaving their corresponding miRNA star strands. This phenomenon may depend on the secondary structure near the scissile phosphate of the miRNA duplex. In addition, I show that ATP is not required for star-strand cleavage in this process. Taken together, the data here provide insight into the miRNA-loading mechanisms in mammals.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.95-102
• /
• 1999

Because a driver is located in the front end of KHST, he is most likely to be insured at collision accidents. So, it is very important to design some survival space for the driver. To evaluate the driver's safety of KHST (Korean High Speed Train), the front structure of power car is analysed using PAMCRASH under the SNCF accident scenario(collision against a movable rigid mass 15 ton at 110㎞/h). Because the driver's cab of KHST is a modified version of TGV-K, which is not so strong as to protect him, it turns out to be inadequate to guarantee his survival space. Therefore it is recommended to redesign the driver's cab in a crashworthy point of view like the case of TGV-Duplex or NEC.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.16-16
• /
• 2003

Mismatches in a DNA duplex are mainly due to DNA duplication errors that are generated by improper function of DNA polymerase. MutS, MutL and MutH are crucial proteins for the initiation of the methyl-directed mismatch repairing in bacteria. MutS has an ATPase activity md recognize the mismatched or unpaired bases on DNA. After binding to a mismatch, MutS recruits MutL to mediate the activation of MutH an endonuclease, which cleaves the 5' site of d(GATC) on the un-methylated strand. Both MutL and MutS also have essential roles in the subsequent removal and re-synthesis of the daughter strand. We have determined the crystal structures of either intact or active fragments of each of these proteins, both alone and complexed with ligands (DNA, ADP and ATP). The biochemical and mutagenesis studies based on the detailed 3-D structures led to new insights into the role of the ATPase activity of MutS in the mismatch recognition and directions for future investigation of mismatch repair.

• Journal of IKEEE
• /
• v.16 no.2
• /
• pp.76-80
• /
• 2012

We propose a new relay system which use echo cancellation in relay station. In the proposed relay system, a half of time resource is required to transmit a symbol compared to conventional relay system. We show the echo cancellation method and frame structure of the proposed system. Simulation result shows that the proposed system has twice capacity than that of the conventional system.

• Journal of the Korean Magnetic Resonance Society
• /
• v.8 no.2
• /
• pp.96-107
• /
• 2004

We prepared two oligonucleotides containing same base pairing, but different base sequence in the middle region, d(CGAATTCG) and d(CGTATACG). NMR and UV absorbance data represented that such variation in base sequence could cause a significant difference in melting temperature and dynamics between d(CGAATTCG)$_2$ and d(CGTATACG)$_2$ duplexes, which are regarded to be associated with the stacked structure and the width of the minor groove of them. The latter showed poor stability compared to the former, because of poor stacking of bases. And berenil could bind to the minor groove of d(CGAATTCG)$_2$ which is relatively narrow, more strongly than d(CGTATACG)$_2$ and this gave rise to large improvement in thermal stability of the d(CGAATTCG)$_2$ duplex, compared to d(CGTATACG)$_2$.