• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.159-167
• /
• 2002

In this paper. we present a new method for monitoring of ECU's self diagnostic signals of vehicle without wire. In order to measure the ECU's self diagnostic signals, the interfaced circuit is designed to communicate ECU and designed terminal according to the IOS, SAE regulation of communication protocol standard. Micro-processor 80C196KC is used for communicating ECU's self diagnositc signals and the results are sent to the wireless terminal and PC monitoring system. Wireless terminal is also developed by 80C196KC, LCD, RF module, and keypad. The command from the keypad is sent to ECU through RF module and the result show on the Graphic LCD in real time. Software on PC is developed to monitor the ECU's self diagnostic signals using the Visual C++ complier in which RS232 port is programmed by half duplex method. The algorithms for measuring the ECU's self diagnostic signals are verified to monitor both ECU and portable terminal state. At the same time, the information to fix the vehicle's problem can be shown on the developed software. The possibility for remote measurement of ECU self diagnostic signal is verified through the developed systems and algorithms.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.83-87
• /
• 2009

The MAC protocol of HiperLAN/2 is based on TDMA/TDD. Mobile terminal acquires a data transmission opportunity as successfulness in channel competition through RCH (Random CHannel) phase. Therefore, AP (Access Point) be able to dynamically assign optimum RCH at next frame according to the number of success and collision. In this paper, we suggest scheme that fluctuate RCH (Random CHannel) number as fixed value considering success and collision for improvement of performance in HiperLAN/2. To prove efficiency of proposed scheme, a lots of simulations are conducted and analyzed in view of throughput and access delay.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1067-1070
• /
• 2003

In this paper, we present a remote measurement system for the wireless monitoring of ECU Sensor Signals of vehicle. In order to measure the ECU sensor signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A micro-controller 80C196KC is used for communicating ECU sensor signals. ECU sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller 80386EX. LCD, and RF-module. 80386EX software is programmed to monitor the ECU sensor signals using the Borland C++ compiler in which the half duplex method was used for the RS232 communication. The algorithms for measuring the ECU sensor signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of ECU sensor signals using 80386EX is also verified through the developed systems and algorithms.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1042-1045
• /
• 2003

In this paper, we present a new method for the monitoring of Electric Control Unit's(ECU) self-diagnostic and the sensor signals of vehicle through Web. In order to measure the ECU's self-diagnostic and sensor signals, the interfaced circuit is designed to communicate ECU and terminal according to the ISO, SAE regulation of communication protocol standard. Microprocessor 80C196KC is used for communicating ECU's self-diagnostic signals and the results are sent to the Embedded Linux System(ELS) through RF module. ELS is developed by SA1110, RF module, Embedded Linux. All commands related in ECU communication are executed through Web. The CGI program composed in web server is executed by user and will return sensor signals from ECU Software on Embedded Linux system is developed to monitor the ECU's sensor signals using the arm compiler tool chain in which RS232 port is programmed by half duplex method. The possibility for remote measurement of ECU sensor signal through Web is verified through the developed systems and algorithms.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.271-278
• /
• 2017

This paper introduces a user-friendly PLC (programmable logic controller) monitoring and control system of heavy machinery using Android based smartphone. The proposed system will control diesel generator and many such like machine without a dedicated PC with respect to similar system and offers a new communication protocol for handling it. The smartphone controls the generator via Wi-Fi, through which it connects to the Raspberry pi which will be installed in the PLC panel to setup the communication between them. Furthermore, Raspberry pi connects to two devices, one is PLC which gives the status and current information of the machine and to ON/OFF the machine. This proposed system used RS485 as a key mediator for data exchanging between Raspberry PI(master) and PLC(slave). RS485 allows multiple devices (up to 32) to communicate at half duplex on single pair of wires and provides a long connectivity area (up to 1200 meters) as compared to another device. This proposed system specially focused on accurate data flow between smartphone and PLC panel.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.05
• /
• pp.129-131
• /
• 1993

A transcutaneoos information transmission system using transmitted infrared light for an implantable total artificial heart(TAH) an developed and the performance of the system was tested. In an in vitro test, transmittance of the developed system was measured through various thicknesses of pig shins. In an in vivo test, a loopback test using a personal computer was performed to determine the error rate and an experiment using a mock system was taken. In this experiment, within acceptable lateral and vertical displacements, the error rate of at least 3.8E-6 was guaranteed. Monitoring signals from the internal controller(Intel 87C196) of the mock system were successfully transmitted to the external controller(IBM PC) and the operating commands from the external controller were successfully conducted by the mock system. Communication was done in half duplex mode according to RS-232 protocol at the speed of 4800 bps.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.237-253
• /
• 2019

For massive multiple-input multiple-output (MIMO) circumstances with time division duplex (TDD) protocol, pilot contamination becomes one of main system performance bottlenecks. This paper proposes an uplink pilot sequence assignment to alleviate this problem for spatially correlated massive MIMO circumstances. Firstly, a single-cell TDD massive MIMO model with multiple terminals in the cell is established. Then a spatial correlation between two channel response vectors is established by the large-scale fading variables and the angle of arrival (AOA) span with an infinite number of base station (BS) antennas. With this spatially correlated channel model, the expression for the achievable system capacity is derived. To optimize the achievable system capacity, a problem regarding uplink pilot assignment is proposed. In view of the exponential complexity of the exhaustive search approach, a pilot assignment algorithm corresponding to the distinct channel AOA intervals is proposed to approach the optimization solution. In addition, simulation results prove that the main pilot assignment algorithm in this paper can obtain a noticeable performance gain with limited BS antennas.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.795-807
• /
• 2022

The development and commercialization of industrial genetically modified (GM) organisms is actively progressing worldwide, highlighting an increased need for improved safety management protocols. We sought to establish an environmental monitoring method, using real-time polymerase chain reaction (PCR) and propidium monoazide (PMA) treatment to develop a quantitative detection protocol for living GM microorganisms. We developed a duplex TaqMan quantitative PCR (qPCR) assay to simultaneously detect the selectable antibiotic gene, ampicillin (AmpR), and the single-copy Escherichia coli taxon-specific gene, D-1-deoxyxylulose 5-phosphate synthase (dxs), using a direct cell suspension culture. We identified viable engineered E. coli cells by performing qPCR on PMA-treated cells. The theoretical cell density (true copy numbers) calculated from mean quantification cycle (Cq) values of PMA-qPCR showed a bias of 7.71% from the colony-forming unit (CFU), which was within ±25% of the acceptance criteria of the European Network of GMO Laboratories (ENGL). PMA-qPCR to detect AmpR and dxs was highly sensitive and was able to detect target genes from a 10,000-fold (10^-4) diluted cell suspension, with a limit of detection at 95% confidence (LOD_95%) of 134 viable E. coli cells. Compared to DNA-based qPCR methods, the cell suspension direct PMA-qPCR analysis provides reliable results and is a quick and accurate method to monitor living GM E. coli cells that can potentially be released into the environment.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.1-8
• /
• 2018

It is a key role in leading and activating coding education as a process to solve problems creatively to produce and provide the educational contents on the basis of 3D printing. In this paper, we develop a variety of fusion contents to use 3D printing and 8bit MCU base control board which provides specific functions through Arduino. The developed control program conducts various packet monitoring more than ten times per a second, supporting intrinsically full duplex. In addition, communication protocol optimized in conveying a lot of information enables to control different contents. The contents produced with the control board and 3D printing are useful as a programming education tool to train the principle and the concept of coding.

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.265-270
• /
• 2012

The subscriber access network is cause of the bottleneck phenomenon because equipment and infrastructure were not originally designed for busty high-bandwidth traffic between MAN(Metro Area Network) and LAN(Local Area Network). Whether riding on shorter copper drops or optical fiber, Ethernet is emerging as the future broadband protocol of choice, offering plug and play simplicity, and low cost. EPON(Ethernet Passive Optical Network) combines point-to-multipoint optical infrastructure with low-cost high-bandwidth Ethernet. The future broadband access network will be a combination of point-to-point and point-to-multipoint Ethernet, optimized for transporting IP data, as well as time critical voice and video. EPON is being considered as a novel communications infrastructure for next-generation broadband access network for the convergence of low-cost Ethernet equipment and low-cost fiber infrastructure. But, EPON has a problem with duplex multimedia services. It is the insufficiency of bandwidth for upstream. Because all ONUs use a shared transmission media for upstream. In this paper, we addressed the problem of upstream bandwidth in EPONs. We presented a wavelength division EPON supporting QoS in the differentiated services framework.