• ETRI Journal
• /
• v.36 no.1
• /
• pp.163-166
• /
• 2014

A microstrip dual-wideband bandpass filter using a multimode resonator (MMR) is proposed in this letter. The proposed MMR loaded with a T-shaped open-ended stub and a short-ended stub exhibits triple mode characteristics, and a synthesis method is developed to illustrate the wide passband with independently controllable center frequencies and bandwidths. To verify this design methodology, a dual-wideband filter with fractional bandwidths of 19.1% and 27.9% is designed and fabricated. The measured results agree with the simulations.

• 한국ITS학회:학술대회논문집
• /
• 2004.11a
• /
• pp.81-84
• /
• 2004

• ETRI Journal
• /
• v.36 no.4
• /
• pp.690-693
• /
• 2014

Compact multi-band bandpass filters using quad-mode stub-loaded resonators are proposed in this letter. Firstly, a novel approach about the mode-splitting characteristics of the quadruple-mode resonator is investigated, which can provide dual-band behavior. Secondly, a quad-band filter is proposed and designed by cascading two quadruple-mode resonators; the upper one operates at 1.8/2.4 GHz (GSM- and WiMax-band) and the lower one at 1.57/2.1 GHz (GPS- and WCDMA-band). Finally, the proposed filters have been fabricated. Respectable agreement between simulation and measurement verifies the validity of this design methodology.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.133-134
• /
• 2015

최근 전자기술이 발달함에 따라, 전자기기의 집적도가 높아지고 있으며, 그에 따라 전자기적 간섭(Electromagnetic Interference)이 큰 문제로 대두되고 있다. 특히, 집적도가 높은 스마트 기기(Smart Device)의 AP(Applicaton Processor)의 경우, 여러 기능을 수행하는 부품이 집적된 SOC(System On Chip)이기 때문에, 전자기적 간섭에 더 민감할 수 있다. 더불어 LTE(Long Term Evolution)을 무선통신으로 이용하는 다양한 주파수대에서 전자기적 간섭은 어플리케이션 및 전자기기의 오작동을 초래할 수 있다. 이를 해결하기 위하여 본 논문에서는 칩패캐지 레벨의 Meander 구조의 기존 필터(Filter)가 가진 문제점을 해결한 구조를 설계하여 3차원 상의 전자장 시뮬레이션을 수행하였다. 또한, 칩의 내성(Immunity)이 취약한 여러 주파수 범위를 차단할 수 있는 이 중 대역차단 필터(Dual Band Stop Filter)를 Meader Line구조를 단순하게 만들어 설계하고 그에 따른 결과를 분석하였다.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.331-337
• /
• 2003

This paper represents 50 ㎓ narrow band pass filters for fiber optical communication fabricated by dual ion beam sputtering method. We have analyzed the characteristics of the TA$_2$ $O_{5}$ and $SiO_2$ single layers in order to optimize the process conditions for the 50 ㎓ narrow band pass filters, and controlled the film thickness uniformity to less than 0.1 nm deviation by dual peak spike filter pre-deposition. We designed and fabricated 50 ㎓ narrow band pass filters that consist of 216 layers including 4 cavities based on quarter wave optical thickness. Class substrates with high thermal expansion coefficients were used to reduce the film stress. Anti-reflection coating at the rear side of the substrate was also needed to reduce the optical thickness errors of the Optical Monitoring System caused by multiple beam interference between the front side and the rear side of substrate. The optical characteristics of this 50 ㎓ narrow band pass filters are insertion loss of 0.40 ㏈, pass band ripple of 0.20 ㏈, and pass bandwidth at -0.5 ㏈ of 0.20 nm. and isolation bandwidth at -25 ㏈ of 0.6 nm, which satisfy specifications of dense WDM system in fiber optical communications.tions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1259-1268
• /
• 2010

In this paper, we presented a new LC prototype synthesis method for the multi-band filter. For synthesis a multi-band filter with the required frequency response, we proposed the diagram of poles and zeros, also, we proposed the optimization process for finding the combination of optimized poles and zeros. From the transfer and reflection functions calculated from poles and zeros, we performed the quasi-elliptic LC prototype synthesis of multi-band filter. Using the proposed LC prototype synthesis method of multi-band filter, dual-band filter operating at GSM(880~960 MHz) and ISM(2,400~2,500 MHz) and triple-band filter operating at GSM(880~960 MHz) and ISM(2,400~2,500, 5,725~5,850 MHz) were designed and fabricated.

• ETRI Journal
• /
• v.43 no.6
• /
• pp.957-965
• /
• 2021

A miniaturized wideband band-pass filter with a 3-dB fractional bandwidth of 109.3% (1.53 GHz to 5.22 GHz), high out-of-band attenuation greater than 25 dB, and wide upper stopband up to 14 GHz is proposed. The design consists of a dual-composite right/left handed resonator, embedded open-circuited stub, and a pair of quarter-wavelength short-circuited stubs. These elements are coupled in the near distance to form a miniature filter with a compact occupied area of 0.21 λ_g×0.19 λ_g (≈ 0.013 cm²). The optimized filter has multitransmission poles in the passband, substantially improving the return loss and insertion loss characteristics. The behavior of the passband and stopband is verified against the results of a lumped element model and matrix analysis with a full-wave moment-based analysis and actual measurements. The results of this verification and a comparison with the performance of filters in other references indicate that the proposed filter is very efficient and applicable to compact microwave systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.959-966
• /
• 2006

This paper proposes a new concept about dual band predistortion linear power amplifier(PD LPA) using diplexer for digital cellular ($f_o$=880 MHz) and IMT-2000($f_o$=2,140 MHz) base stations. The diplexer is composed of low pass filter having defected ground structure(BGS) microstrip line and high pass filter having high-Q lumped capacitors and distributed elements. The proposed predistorter adopts a reflection type intermodulation signal generator with 3 dB hybrid coupler for good reflection characteristic. for a forward link one carrier CDMA IS-95A 1FA and WCDMA 1FA signal, the proposed dual band PD LPA shows the adjacent channel leakage ratio(ACLR) improvement about 10 dB and 9.36 dB for digital cellular and IMT-2000 band, respectively.

• 한국ITS학회:학술대회논문집
• /
• v.2007 no.10
• /
• pp.330-333
• /
• 2007

• ETRI Journal
• /
• v.39 no.1
• /
• pp.69-75
• /
• 2017

This study presents a dual-band 3D frequency selective surface that provides a large degree of freedom in frequency and bandwidth adjustability. The proposed structure is evaluated in terms of its structural parameters, and prototypes are fabricated. The radius of the copper rings and the height of the cylinders are considered, and are shown through full-wave electromagnetic simulations to have a significant effect on the frequency characteristics of the frequency selective surface. The measurement results of the fabricated samples are compared with the simulation results, and a satisfactory agreement is obtained.