• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.485-491
• /
• 2014

An Antenna & RF system for a fly-away satcom terminal application on ka-band is presented in this paper. The Fly-away satellite terminal can be moved and operated by two person and adapt automatic satellite tracking system in order to decrease the tracking time. Additionally, for low-power consumption, compact size and light-weight, a dual reflector antenna is constructed using dual-offset gregorian antenna structure. For minimize weight, the reflector of the antenna is made of Magnesium. For low-power consumption and light-weight, the pHEMT MMIC compound devices is utilized. The Electronic Band-Gap(EBG) Low-Pass Filter(LPF) is designed for harmonic rejection. In the receiving part, Low-Noise Block converter(LNB) structure is designed for compact and lightweight. In this paper, fly-away satcom terminal with low-power consumption, compact size and light-weight is described with antenna system and RF system performances. Through the experimentation, fly-away terminal's EIRP is more than 50dBW, G/T is more than $17dB/^{\circ}K$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.9
• /
• pp.33-41
• /
• 2015

To improve the power quality of distributed generation (DG) systems even in the presence of distorted grid condition, dual current control scheme of a grid-connected inverter is proposed. The proposed current control scheme is achieved by decomposing the inverter state equations into the fundamental and harmonic components. The derived models are employed to design dual current controllers. The conventional PI decoupling current controller is used in the fundamental model to control the main power flow in DG systems. At the same time, the predictive control is applied in the harmonic model to suppress undesired harmonic currents to zero quickly. To decompose the voltage inputs and state variables into the fundamental and harmonic components, the fourth order band pass filter (BPF) is designed in the discrete-time domain for a digital implementation. For experimental verification, 2kVA prototype of a grid-connected inverter has been constructed using digital signal processor (DSP) TMS320F28335. The effectiveness of the proposed strategy is demonstrated through comparative simulation and experimental results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1206-1211
• /
• 2006

In this paper, a Balun-BPF with the balun and BPF characteristics is proposed by using dual-mode ring resonator of $1{\lambda}$. We obtained the property of balun with the phase imbalance by symmetrically placing each output of ring resonator. The dual mode has been made by impedance difference between input and output lines. The fabricated Balun-BPF shows bandwidth of 40 MHz and insertion loss of 2.4 dB at a center frequency of 2.45 GHz. It shows the phase imbalance of $180{\sim}184$ degree and the magnitude imbalance of within 1 dB. The measured frequency responses agree well with simulated ones.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.3
• /
• pp.342-348
• /
• 2015

This paper presents a 1.9-GHz digital ${{\Delta}{\Sigma}}$ fractional-N PLL with a finite impulse response (FIR) filter embedded for noise suppression. The proposed digital implementation of FIR provides a simple method of increasing the number of taps without complicated calculation for gain matching. This work demonstrates 32 tap FIR filtering for the first time and successfully filtered the in-band phase noise generated from delta-sigma modulator (DSM). Design considerations are also addressed to find the optimum number of taps when the resolution of time-to-digital converter (TDC) is given. The PLL, fabricated in $0.11-{\mu}m$ CMOS, achieves a well-regulated in-band phase noise of less than -100 dBc/Hz for the entire range inside the bandwidth of 3 MHz. Compared with the conventional dual-modulus division, the proposed PLL shows an overall noise suppression of about 15dB both at in-band and out-of-band region.

• Journal of Satellite, Information and Communications
• /
• v.10 no.3
• /
• pp.131-136
• /
• 2015

In this paper, prior to the flight model X-band dual-mode circular cavity filter required for the high power transmission of the observation payload in the geostationary satellite, the development model are designed and analyzed to show the analytical multipactor requirement margin. First of all, the multipaction breakdown power sensitivities were analyzed by changing the iris width and thickness within the filter, and through that the iris width and thickness was selected and then the multipaction threshold powers over the frequencies within the bandwidth were analyzed and the required margin of 8 dB was obtained. Also for the high power transmission filter, another important phenomena known as corona breakdown are analyzed for the iris width and thickness changes. Finally the development model manufactured was tested and the results met the key requirements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1139-1145
• /
• 2002

Wavelet transformed data can filter signal with each frequency band, because it includes detail information about original signal. Therefore, in this paper, important two noises were removed by wavelet. About AWGN environment UDWT(undecimated discrete wavelet transform), applying hard-threshold, was used and about impulse noise environment, it can be possible to recognize edge of original signal as well as superior denoising effect by using two methods, denoising by threshold and slope of signal by wavelet. SNR was used as a judgemental criterion of a denoising effect and Blocks and DTMF(dual tone multi frequency) were used as a test signal.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.79.2-79.2
• /
• 2019

We introduce Maemi Dual Field Telescope System (MDFTS) which is newly installed at Kyung Hee Astronomical Observatory (KHAO). MDFTS consists of two telescope tubes (40cm and 10cm), whose observing fields are aligned with different field of view, 15' x 11' and 83' x 63' respectively. We present the specification of instruments (telescope, mount, camera, and filter system) and the observation environment of KHAO. We expect that MDFTS can be used for transient survey e.g. Intensive Monitoring Survey of Nearby Galaxies (IMSNG). Based on observations conducted so far, the limiting magnitude of 40cm telescope in B-band is B_lim ~ 16 mag at 5-σ detection with 150 seconds total integration time under dark and clear observing condition. Also the integrated observing software for MDFTS, KAOS40 is now under developing.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.6
• /
• pp.787-798
• /
• 1995

We implement the E-plane T-juncition manifold mutiplexer having low insertion loss for output multiplexer of Ku-band satellite transponder. Manifold multiplexer implemented here is composed of 2 channel filters, T-junctions, half-wave waveguide connecting channel filters and manifold, and manifold itself.[1-4] Considering the mass and volume of the satellite transponder, the channel filters are designed to dual-mode.[5-13] And Elliptic filter function is used, which has good characteristics of suppressing the interference between 2 channels. Since the performance of manifold multiplexer depends on the manifold waveguide transmission line length, it's necessary proper analysis. In this paper, we do optimization process of T-junction and other elements by using CAD and implement the manifold multiplexer. An experiment shows that characteristic response of multiplexer matches wel its modeling result.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1420-1421
• /
• 2008

In this paper, a dual band microstrip filter is designed for RFID Application. Both magnetic and electric coupling structures are implemented to provide high performance passband response. The measured results demonstrate that reflection factor is 20dB and 15dB at 912MHz and 2450MHz. The measured loss is 2.6dB and 2.8dB at 912MHz and 2450MHz, respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.11
• /
• pp.1995-1997
• /
• 2007

In this paper we propose a wavelength-switchable fiber ring laser that employs a polarization-dependent fiber band stop filter. The fiber filter was fabricated by inscribing a long-period fiber grating on a high birefringent fiber. Dual-wavelength switching operation was accomplished by controlling the rotatable linear polarizer which rotated the polarization plane of the light circulating through the fiber laser cavity. The amplitude variation of both laser lines was measured to be less than 0.5 dB and the signal-to-amplified spontaneous emission ratio was more than 55 dB.