• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.799-804
• /
• 2008

In the paper, a dual-bandpass filter for ship's wireless LAN has proposed, which was designed by using step stub in compliance with 2.4 GHz and 5.2 GHz band The dual-bandpass filter can be designed by adjusting the sizes of the step stub in compliance with the frequency bands of 2.4 GHz and 5.2 GHz, which has the improved performance compared with the existing dual-bandpass filter. Furthermore, dual-bandpass filter using step stub has better efficiency. The measured results for the fabricated dual-bandpass filters agreed well with the simulated ones, and hence it was confirmed that the proposed design method is valid.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1684-1690
• /
• 2018

A new digital pre-distortion (DPD) technique for closely spaced dual-band signals is proposed. In the system under consideration, dual-band signals are amplified by a single broadband power amplifier (PA) at a transmitter. The PA output is distorted by cross-modulation between the two bands as well as their own inter-modulation distortion. Especially, if the two bands are placed in close proximity to each other, their spectral regrowths due to in-band intermodulation overlap with each other, which degrades DPD performance. To solve this problem, we propose a new DPD technique where the dual-band PA characteristics are estimated first, and then the DPD parameters are obtained from the estimated PA characteristics. By finding the DPD parameters through two steps, pre-distortion can perform well for the closely-spaced dual band signals. The proposed technique is verified through computer simulation. Simulation result shows that the proposed method performs better than the conventional method for closely-spaced dual band signals.

• Journal of Korea Water Resources Association
• /
• v.53 no.3
• /
• pp.201-214
• /
• 2020

This study proposes a bias correction method of dual-pol radar rain rate in real time using the dual Kalman filter. Unlike the conventional Kalman filter, the dual Kalman filter predicts state variables with two systems (state estimation system and model estimation system) at the same time. Bias of rain rate is corrected by applying the bias correction ratio to the rain rate estimate. The bias correction ratio is predicted from the state-space model of the dual Kalman filter. This method is applied to a storm event with long duration occurred in July 2016. Most of the bias correction ratios are estimated between 1 and 2, which indicates that the radar rain rate is underestimated than the ground rain rate. The AR (1) model is found to be appropriate for explaining the time series of the bias correction ratio. The time series of the bias correction ratio predicted by the dual Kalman filter shows a similar tendency to that of observation data. As the variability of the bias correction increases, the dual Kalman filter has better prediction performance than the Kalman filter. This study shows that the dual Kalman filter can be applied to the bias correction of radar rain rate, especially for long and heavy storm events.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.41 no.3
• /
• pp.75-96
• /
• 2016

This paper investigates the usefulness of drones in an urban delivery system. We define the vehicle and drone routing problem with time window (VDRPTW) and present a model that can describe a dual mode delivery system consisting of drones and vehicles in the metropolitan area. Drones are relatively free from traffic congestion but have limited flight range and capacity. Vehicles are not free from traffic congestion, and the complexity of urban road network reduces the efficiency of vehicles. Using drones and vehicles together can reduce inefficiency of the urban delivery system because of their complementary cooperation. In this paper, we assume that drones operate in a point-to-point manner between the depot and customers, and that customers in the need of fast delivery are willing to pay additional charges. For the experiment datasets, we use instances of Solomon (1987), which are well known in the Vehicle Routing Problem society. Moreover, to mirror the urban logistics demand trend, customers who want fast delivery are added to the Solomon's instances. We propose a hybrid evolutionary algorithm for solving VDRPTW. The experiment results provide different useful insights according to the geographical distributions of customers. In the instances where customers are randomly located and in instances where some customers are randomly located while others form some clusters, the dual mode delivery system displays lower total cost and higher customer satisfaction. In instances with clustered customers, the dual mode delivery system exhibits narrow competition for the total cost with the delivery system that uses only vehicles. In this case, using drones and vehicles together can reduce the level of dissatisfaction of customers who take their cargo over the time-window. From the view point of strategic flexibility, the dual mode delivery system appears to be more interesting. In meeting the objective of maximizing customer satisfaction, the use of drones and vehicles incurs less cost and requires fewer resources.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.760-770
• /
• 2016

A 12-bit 750 kS/s Dual-Sampling Successive Approximation Register Analog-to-Digital Converter (SAR ADC) technique with reduced Capacitive DAC (CDAC) is presented in this paper. By adopting the Adaptive Power Control (APC) technique for the two-stage latched type comparator and using bootstrap switch, power consumption can be reduced and overall system efficiency can be optimized. Bootstrapped switches also are used to enhance the sampling linearity at a high input frequency. The proposed SAR ADC reduces the average switching energy compared with conventional SAR ADC by adopting reduced the Most Significant Bit (MSB) cycling step with Dual-Sampling of the analog signal. This technique holds the signal at both comparator input asymmetrically in sample mode. Therefore, the MSB can be calculated without consuming any switching energy. The prototype SAR ADC was implemented in $0.18-{\mu}m$ CMOS technology and occupies $0.728mm^2$. The measurement results show the proposed ADC achieves an Effective Number-of-Bits (ENOB) of 10.73 at a sampling frequency of 750 kS/s and clock frequency of 25 MHz. It consumes only 0.13 mW from a 5.0-V supply and achieves the INL and DNL of +2.78/-2.45 LSB and +0.36/-0.73 LSB respectively, SINAD of 66.35 dB, and a Figures-of-Merit (FoM) of a 102 fJ/conversion-step.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.3
• /
• pp.267-274
• /
• 2014

The purpose of this study is to identify a relationship between the time taken and the characteristics of touch key for touch-screen-based in-vehicle information system (IVIS) and to suggest a new Fitts' law formula that is added a driving speed parameter. Many studies already have shown that Fitts' law is well fitted in various devices for primary tasks, but there is no study of Fitts' law for secondary task in dual-task situation. Fitts' law may not be applied to the secondary task as it is, because the secondary task performance can be affected by the amount of attention for the primary task. To verify this, we carried out an experiment that showed whether pointing task to touch-screen-based IVIS during driving is affected by driving speeds or not. In the experiment, 30 people were volunteered for participants and the participants carried out driving task and pointing task on the screen of IVIS simultaneously. We measured the time to point a touch key on IVIS for every condition (3 driving speeds${\times}5$ touch key sizes${\times}7$ distances between steering wheel and touch key). As a result, there was an effect of driving speed on the pointing time. As we extended the index of difficulty of the conventional Fitts' law formula by incorporating driving speed, we established an extended Fitts' law formula for pointing on IVIS, which showed better accordance with dual task situation. This study can be evidence that secondary task performance is affected by degree of concentration on primary task, and the extended Fitts' law formula can be useful to design interfaces of IVIS.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1070-1076
• /
• 2007

In this paper, we study the characteristics of dual band microstrip antenna with the wedge-shaped radiation patch added the slot using air substrate. Wedge-shaped patch antenna with air substrate is avoided the large probe reactance associated with a thick substrate owing to the use of short probe and good impedance matching over a wide frequency range can be obtained. Slot on the antenna radiator varies the reactance component according to the employed frequency and affect the resonance freaqency of the antenna, therefore the antenna can resonate at the dual band(cellular and PCS band). The slot length and position have an effect on the bandwidth and input impedance of the antenna are optimized by simulation. From the experiment results for the fabricated antenna, -10 dB of $S_{11}$ is content with the allocated bandwidth of Cellular and PCS system and - 15 dB of cross polarization level. From the results of this paper, it has been confirmed that the proposed antenna can be used as the base station antenna fur Cellular and PCS band.

• Progress in Medical Physics
• /
• v.27 no.1
• /
• pp.8-13
• /
• 2016

Dual energy cone-beam CT can distinguish two materials with different atomic compositions. The principle of dual energy cone-beam CT based on modulation layer is that higher energy spectrum can be acquired at blocked x-ray window. To evaluate the possibility of modulation layer based dual energy cone-beam CT, we analyzed x-ray spectrum for various thicknesses of modulation layers by Monte Carlo simulation. To compare with the results of simulation, the experiment was performed on prototype cone-beam CT for 50~100 kVp with CdTe XR-100T detector. As the result of comparing, the mean energy of energy spectrum for 80 kVp are well matched with that of simulation. The mean energy of energy spectrum for 80 and 120 kVp were increased as 1.67 and 1.52 times by 2.0 mm modulation layer, respectively. We realized that the virtual dual energy x-ray source can be generated by modulation layer.

• YAKHAK HOEJI
• /
• v.58 no.1
• /
• pp.71-79
• /
• 2014

Although Korean patients with type 2 diabetes mellitus (T2DM) are generally treated by western medicine, many of them strongly believe in the traditional oriental Sasang constitutional classification and depend on it for food, health supplements, and oriental medicines decision making. Sasang constitutional classification is a part of traditional Korean medicine that divides people into four constitutional types (Tae-Yang: TY, Tae-Eum: TE, So-Yang: SY, and So-Eum: SE), which differ in inherited characteristics such as appearance, personality traits, susceptibility to diseases, and drug responses. It is recommended for T2DM patients to control their blood glucose very well from early stages with drugs and diet. However, many T2DM patients respond differently to their drugs, even though they receive the same medicine. Therefore, the present study investigated whether Sasang constitutional type can explain the therapeutic differences between oral hypoglycemic agents (OHAs) therapy (mono, dual and triple drug therapy). Patients of 618 with T2DM diagnosis and Sasang constitutional type known who received both western and oriental medicine treatment in a hospital between April 2006 and April 2013 retrospectively studied. HbA1c (%) and blood glucose (mg/dl) levels before OHAs therapy and 3 month after were collected for metformin (MET) or sulfonylurea (SU) monotherapy, MET+SU dual therapy, MET+except SU (where was either alpha-glucosidase inhibitor, dipeptidyl peptidase-4 inhibitor, meglitinide or thiazolidinedione) dual therapy, and triple therapy, according to Sasang constitutional type. For statistical analysis, ANOVA was used and paired t-test by SPSS 19.0 where P values less than 0.05 were considered statistically significant. Pattern was similar levels of HbA1c and blood glucose and which was decreased in order of mono, MET+SU dual, MET+except SU dual and triple therapy. In all patients comparison, for the So-yang (SY) constitutional type, either monotherapy was less effective; for Te-eum (TE) type, MET+SU dual therapy was less effective while MET+except SU dual therapy was more effective and the triple therapy was less effective; and for So-eum (SE) type, the triple therapy was more effective. For the management of TE type it is recommended to use drugs except SU when dual therapy is needed, restrict triple therapy and consider dual and insulin therapy; for SY type it is recommended to follow current guidelines; and for SE type it is advisable to skip dual therapy and start the triple therapy early. Finally, the therapeutic response to OHAs is different among Korean T2DM patients with different Sasang constitutional types. Taken together, the choice of effective OHAs therapy for each type is necessary in order to minimize the poor control of blood glucose level, the risk of complications, and the costs from a failure of therapy.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.1003-1011
• /
• 2020

This study aims to compare and evaluate the image differences between single and dual sources in applying a technique to reduce metal artifacts using dual energy CT. Discovery CT 256 (GE, USA) as a single source device and Somatom Definition Flash (Siemens Health Care, Forchheim, Germany) as a dual source device. The self-made phantom (pigs with medical titanium screws inserted) was quantitative and qualitatively evaluated under the same conditions by varying the dose under the same conditions using a dual energy CT. The evaluation method was compared by measuring SNR for metal artifacts (scattering, stripe) generated by metal inserts, divided around bones and around tissues. There was a difference in images in the method of reducing metal artifacts between single-source and dual-source devices. In a single source device, the linearized prosthesis by metal implantation showed a greater decrease than the image obtained from a double source device, and the surrounding tissue was well observed without interference from the artifact. In dual-source devices, scattering and stripe artifacts caused by metal inserts decreased more than on a single source device, and signals from adjacent tissues surrounding the metal implant were well observed without diminishing. If the examination is conducted separately between single source and dual source devices depending on whether the area to which the patient is intended to be viewed during the examination is adjacent to the metal insert or the total tissue surrounding the metal insert, it is believed that diagnostic helpful images can be obtained.