• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.367-371
• /
• 2014

When the crew or passengers fall into the water due to marine accident of vessel, it is very important to rescue them quickly. In the case of marine accidents, most people in distress have been wearing a lifejacket, so if the GPS and Cospas-Sarsat communication module will be integrated within the lifejacket, it is easy to rescue them. In this paper, development of the dual band lifejacket-integrated antenna for GPS and Cospas-Sarsat communication is discussed. The antenna with the FR-4 substrate of 0.2mm thickness for flexibility was designed that it can be fitted close to the shoulder of the life jacket and operate at 1.575GHz and 406MHz. The GPS communication antenna was implemented with a ring-slot antenna having a circular polarized characteristic and a meander type linear polarized antenna is used as Cospas-Sarsat communication. The two antennas are fed by a single microstrip line and an open stub is used to minimize the mutual interference between the two antennas. The performance of the fabricated antenna attached to the life vest is confirmed by the measurement of the return loss at GPS and Cospas-Sarsat frequency bands.

• Atmosphere
• /
• v.15 no.1
• /
• pp.47-57
• /
• 2005

Extending the success of the Tropical Rainfall Measuring Mission (TRMM), the spaceborne measurement of precipitation by Global Precipitation Measurement (GPM) is initiated. The GPM consists of a core satellite which will have a dual-frequency precipitation radar (DPR) and a constellation of small satellites equipped with microwave radiometers. The GPM is inherently a global program. Responding to the GPM plan, many other nations are much interested in participating in the GPM team or simply utilizing GPM products aiming at the development of meteorological technology. Korea can fully function its role if Korea is selected as a CAL/VAL site for the GPM because Korea maintains a well-established dense rain gauge network (AWS), precipitation radars, and the Haenam super site for surface observation. In this feasibility study, the necessities of the GPM project in the context of academical and social backgrounds and associated international and domestic activities are investigated. And GPM-related core technologies and application areas are defined. As a result, it is found that GPM will represent a great opportunity for us because of its ability to provide not only much enhanced three-hourly global rain products but also very useful tools for the enhancement of weather forecasting capabilities, management of water resources, development and implementation of monitoring techniques for severe weather phenomena, agricultural managements and climate application. Furthermore, rain retrieval and CAL/VAL technologies obtained during the involvement in the international GPM project will serve as basic knowledges to run our own geostationary satellite program.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.7-13
• /
• 2009

This paper presents a multi-channel transceiver that achieves a data rate of 3.125Gb/s/ch. The LVDS is used because of its noise immunity and low power consumption. And a pre-emphasis circuit is also proposed to increase the transmitter speed. On the receiver side, a low-power CDR(clock and data recovery) using 1/4-rate clock based on dual-interpolator is proposed. The CDR generates needed additional clocks in each recovery part internally using only inverters. Therefore each part can be supplied with the same number of 1/4-rate clocks from a clock generator as in 1/2-rate clock method. Thus, the reduction of a clock frequency relaxes the speed limitation and lowers power dissipation. The prototype chip is comprised of two channels and was fabricated in a $0.18{\mu}m$ standard CMOS process. The output jitter of transmitter is loops, peak-to-peak(0.31UI) and the measured recovered clock jitter is 47.33ps, peak-to-peak which is equivalent to 3.7% of a clock period. The area of the chip is $3.5mm^2$ and the power consumption is about 119mW/ch.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.128-141
• /
• 2017

This paper analyzes the under-researched field of the characteristics of th Chosun private railway, such as laws, systems, human resources, and subsidies associated with this railway, in an effort to increase our understanding of these characteristics. It was found that the private railway shared strong identity resemblance with a national project, as it served to assist the roles of the main national railway. General patterns of change of the company indicate that the private railway received increased subsidies consequent to the amendment of a related law and that it was strongly influenced by Japan's railway policies. The private railway system during the Chosun period more subsidies than those administered by Japan, and they tended to depend on fund raising for external capital. A tendency of many board members to be from the Chosun bureau was also noted. Profits in the private railway system were relatively low compared to those of the national railway such that the deficits were supplemented by the subsidies redeived. Based on corroborating examples, the private railway system can be said to have been an organization that had strong connections with national projects. It was especially related to regional industries according to an examination of the distribution of lines, which shows that most assisted the main railway or coincided with regions undergoing industrial development. Typically, northern areas were for resource development while southern areas were for agricultural production and/or passenger transportation. The company carried dual traits as it operated as a subsidiary enterprise for peripheral profit while also playing a role in transportation.

• The Korean Journal of Malacology
• /
• v.30 no.4
• /
• pp.429-431
• /
• 2014

Since we reported a BLAST server for the mollusk in 2004, no work has reported the usability or modification of the server. To improve its usability, the BLAST server for the mollusk has been updated as version II (http://www.malacol.or.kr/blast) in the present study. The database was constructed by using the Intel server Platform ZSS130 dual Xeon 3.20 GHz CPU and Linux CentOS system and with NCBI WebBLAST package. We downloaded the mollusk nucleotide, amino acid, EST, GSS and mitochondrial genome sequences which can be opened through NCBI web BLAST and used them to build up the database. The updated database consists of 520,977 nucleotide sequences, 229,857 amino acid sequences, 586,498 EST sequences, 23,112 GSS and 565 mitochondrial genome sequences. Total database size is 1.2 GB. Furthermore, we have added repeat sequences, Escherichia coli sequences and vector sequences to facilitate data validation. The newly updated BLAST server for the mollusk will be useful for many malacological researchers as it will save time to identify and study various molluscan genes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.915-921
• /
• 2001

IGF-I is involved in the regulation of growth and differentiation in mammals, but its role as a modulator of growth and metabolism in poultry is poorly understood. And, no studies have so far been reported for the comparison between serum IGF-I concentration and body growth in the egg type or the dual purposes (meat and egg type) chicken including the Korean Native Ogol Chicken (KNOC). Therefore, in order to improve the body growth and meat production of the KNOC, this study was conducted for the identification of the polymorphism of IGF-I gene and for its possible association with both body weight and IGF-I concentration. The RFLP patterns for IGF-I gene were identified by the PstI restriction enzyme. The frequencies of +/+, +/-, and -/- genotype were 16.9%, 51.7%, and 31.4%, respectively. Any statistical significance was not observed in all variations except for sex variation (p<0.01) by covariate quadratic model. The significant effect of the IGF-I genotype on body weight by sex indicates that there are different physiological characteristics in gender. Although the body weights of male KNOCs in most ages were not significant, there was a tendency of KNOCs with +/+ IGF-I genotype to be heavier than those with any other genotypes. But all IGF-I genotypes in female did not influence on body weight. The ANOYA revealed no significant effects of IGF-I genotypes on serum IGF-I concentration but sex effect was highly significant on the IGF-I concentration at 20 and 40 weeks (p<0.01). Although the +/+ genotype, in gender, tended to express a higher IGF-I concentration than the other genotypes at all ages in males, a statistical difference among the genotypes was not found except for 60 weeks (p<0.05). Furthermore, since body weight and IGF-I genotypes are associated, it is possible to improve KNOC to a meat type breed if a continuous selection can be made for the body weight and/or IGF-I traits.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.1
• /
• pp.36-45
• /
• 2017

Abstract It is necessary to verify the properties of an inertial measurement unit in the flight environment before applying to military applications. In this paper, we presented a new approach to verify an inertial measurement unit(IMU) in regard to the performance and the robustness in flight environments for the high-dynamics vehicle systems. We proposed two methods for verification of an IMU. We confirmed normal operation of an IMU and properties in flight environment by using direct comparison method. And we proposed real time multi-navigation system to complement the first method. The proposed method made it possible to compare navigation result at the same time. Therefore, it is easy to analyze the performance of an inertial navigation system and robustness during the vehicle flight. To verify the proposed method, we carried out a flight test as well as an experimental test of flight vibration on the ground. As a result of the experiment, we confirmed flight environment properties of an IMU. Therefore, we shows that the proposed method can serve the reliability improvement of IMU.

• Journal of Life Science
• /
• v.28 no.7
• /
• pp.778-785
• /
• 2018

Autophagy is a complex signaling process and has been implicated in tumor suppression and anticancer therapy resistance. Autophagy can produce tumor-suppressive effect by inducing autophagic cell death, either in collaboration with apoptosis. In this current study, we found that celecoxib (CCB), a nonsteroidal anti-inflammatory drug (NSAID) with multifaceted effects, induced autophagy including enhanced LC3 conversion (LC3-I to LC3-II) and reduced autophagy substrate protein p62 level in multidrug-resistant (MDR) cancer cells. CCB sensitized human multidrug resistant (MDR) cancer cells to the ansamycin-based HSP90 inhibitor 17-allylamino-17-demethoxygeldanamycin (17-AAG), a benzoquinoid ansamycin, which causes the degradation of several oncogenic and signaling proteins, by inducing autophagic cell death and apoptosis. CCB significantly augmented 17-AAG-mediated level of LC3-II/LC-I, indicating the combined effect of 17-AAG and CCB on the induction of autophagy. Autophagic degradation of mutant p53 (mutp53) and activation of caspase-3 in 17-AAG-treated MDR cells were accelerated by CCB. Inhibition of caspase-3-mediated apoptotic pathway by Z-DEVD-FMK, a caspase-3 inhibitor, did not completely block CCB-induced cell death in MCF7-MDR cells. In addition, treatment of MDR cells with Z-DEVD-FMK failed to prevent activation of autophagy by combined treatment with 17-AAG and CCB. Based on our findings, the ability of clinically used drug CCB to induce autophagy has important implications for its development as a sensitizing agent in combination with Hsp90 inhibitor of MDR cancer.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.94-100
• /
• 2016

PURPOSE. To evaluate the effects of hydrogen peroxide pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement. MATERIALS AND METHODS. The specimens were prepared to evaluate the bond strength of epoxy resin-based fiber posts (D.T. Light-Post) to dual-curing resin cement (RelyX U200). The specimens were divided into four groups (n=18) according to different surface treatments: group 1, no treatment; group 2, silanization; group 3, silanization after hydrogen peroxide etching; group 4, silanization with warm drying at $80^{\circ}C$ after hydrogen peroxide etching. After storage of the specimens in distilled water at $37^{\circ}C$ for 24 hours, the shear bond strength (in MPa) between the fiber post and resin cement was measured using a universal testing machine. The fractured surface of the fiber post was examined using scanning electron microscopy. Data were analyzed using one-way ANOVA and post-hoc analysis with Tukey's HSD test (${\alpha}=0.05$). RESULTS. Silanization of the fiber post (Group 2) significantly increased the bond strength in comparison with the non treated control (Group 1) (P<.05). Heat drying after silanization also significantly increased the bond strength (Group 3 and 4) (P<.05). However, no effect was determined for hydrogen peroxide etching before applying silane agent (Group 2 and 3) (P>.05). CONCLUSION. Fiber post silanization and subsequent heat treatment ($80^{\circ}C$) with warm air blower can be beneficial in clinical post cementation. However, hydrogen peroxide etching prior to silanization was not effective in this study.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.290-298
• /
• 2018

This study aimed to evaluate surface morphology and resin tag penetration of resin infiltration into primary anterior teeth after enamel deproteinization with sodium hypochlorite (NaOCl) prior to phosphoric acid ($H_3PO_4$) etching. Ninety primary anterior teeth with non-cavitated caries lesion were devided five groups according to enamel pretreatment as follows, group I-15% hydrochloric acid (HCl) 2min. ; group II-5.25% NaOCl 1min., 35% $H_3PO_4$ 1min. ; group III-5.25% NaOCl 2min., 35% $H_3PO_4$ 1min. ; group IV-5.25% NaOCl 1min., 35% $H_3PO_4$ 2min. ; group V-5.25% NaOCl 2min., 35% $H_3PO_4$ 2min. Fifteen teeth were examined etched surface structure using field emission-scanning electron microscope. Seventy five teeth were infiltrated with resin, maximum penetration depth and percentage penetration were analysed using dual fluorescence confocal microscopy. As the application time of NaOCl increased, ratio of enamel type I, II were increased. Percentage penetration (PP) was higher in group V than group II, III (p < 0.05). PP of group IV, V did not show any differences. Non-cavitated caries of primary anterior teeth can be treated with resin infiltration. Enamel deproteinization with NaOCl prior to 35% $H_3PO_4$ etching could be an alternative of 15% HCl etching in resin infiltration.