• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.3
• /
• pp.33-46
• /
• 2007

This study deals with the adaptive multiuser OFDM (Orthogonal Frequency Division Multiplexing) system which adjusts the resource allocation according to the environmental changes in such as wireless and quality of service required by users. The resource allocation includes subcarrier assignment to users, modulation method and power used for subcarriers. We first develop a general optimization model which maximizes data throughput while satisfying data rates required by users and total power constraints. Based on the property that this problem has the 0 duality gap, we apply the subgradient dual optimization method which obtains the solution of the dual problem by iteration of simple calculations. Extensive experiments with realistic data have shown that the subgradient dual method is applicable to the real world system, and can be used as a dynamic resource allocation mechanism.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.57-58
• /
• 2006

Ad hoc MAC protocols using directional antennas can be used to improve the network capacity by improving spatial reuse. But, the directional MAC protocols have the problem of deafness and have a poor throughput performance. The dual-channel DMAC protocol has been proposed to mitigate deafness and improve spatial reuse. In this paper, we propose a dual-channel DMAC protocol using the omnidirectional antenna for an out-of-band tone and directional antennas for control/data channels. In the proposed MAC protocol, an omnidirectional out-of-band tone mitigates deafness and directional antennas used in control/data channels improve spatial reuse and reduce interference packets. The throughput performance of the proposed MAC protocol is confirmed by computer simulations using Qualnet ver. 3.8 simulator.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.1
• /
• pp.16-21
• /
• 2016

Computed tomography (CT) can completely digitize the interior and the exterior of nearly any object without any destruction. Generally, the resolution for industrial CT is below a few microns. The industrial CT scanning, however, has a limitation because it requires long measuring and processing time. Whereas, 2D X-ray imaging is fast. In this paper, we propose a novel concept of 3D non-destructive inspection technique using the advantages of both micro-CT and dual X-ray images. After registering the master object’s CT data and the sample objects’ dual X-ray images, 3D non-destructive inspection is possible by analyzing the matching results. Calculation for the registration is accelerated by parallel computing using graphics processing unit (GPU).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.2016-2021
• /
• 2009

In this paper, a dual-band antenna aimed for a mobile communication repeater was designed and measured. The operating frequency ranges are GSM(870${\sim}$960 MHz) and WCDMA(1920${\sim}$2170 MHz) bands. Experimental and numerical studies are performed for various design variables such as slot lengths. Using two meandering slots in the ground plane, we can obtain two higher resonant frequencies significantly with broader bandwidths. The measured maximum gain of antenna is 2 dBi in the GSM band and 2.45 dBi in the WCDMA band.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.1
• /
• pp.20-23
• /
• 2014

Dual phase steels have a microstructure comprising of a polygonal ferrite matrix together with dispersed islands of martensite. There are clear differences between the image quality (IQ) map of the dual phase and the corresponding ferritic/pearlitic structures, both in the as-heat treated and cold rolled conditions. Electron backscatter diffraction (EBSD) techniques were used to study the evolution substructure of steel due to plastic deformation. The martensite-ferrite and ferrite-pearlite interfaces were observed. The interface can be a source of mobile dislocations which the bands seem to originate from the martensite islands. In particular, the use of image quality is highlighted.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.530-533
• /
• 2001

Interleaved Dual Boost(IDB) converter can reduce current ripple, switching loss and harmonics without filter in input power line. Moreover, this improve power factor. In this paper, we will use the state average methode and small signal analysis at the Interleaved dual boost converter. 4-type controllers were designed by using control transfer function. The result of these controller simulations is analyzed and proposed a proper controller at IDB

• Journal of Power Electronics
• /
• v.7 no.2
• /
• pp.118-123
• /
• 2007

This paper presents a new ZCS-PWM high frequency inverter. Zero current switching operation is achieved in the whole load range by using a simple auxiliary reverse blocking switch in parallel with series resonant capacitor. Dual duty cycle control scheme is used to provide a wide range of high frequency AC output power regulation that is important in many high frequency inverter applications. It found that a complete soft switching operation can be achieved even for low power setting ranges by introducing high-frequency dual duty cycle control scheme. The proposed high frequency inverter is more suitable for consumer induction heating(IH) applications. The operation and control principle of the proposed high frequency inverter are described and verified through simulated results.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.154-163
• /
• 1999

In this paper, an ultra precision positioning system has been developed using dual servo loop control. For positioning system having long distance with ultra precision , the combination of global stage and micro stage was required. A servo motor based ball screw is used as a global stage and the piezo actuator as a micro stage. For the improvement of positional precision, the digital Chebyshev filter is implemented in the developed to dual servo system. Therefore, the positional repeatability has been achieved within ${\pm}$ 10 mm, and this technique can be applied to develop precision semiconductor equipments such as lithography steppers and probers.

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.1
• /
• pp.135-143
• /
• 2012

We present two kinds of construction methods for self-dual codes over $\mathbb{F}_2+u\mathbb{F}_2$. Specially, the second construction (respectively, the first one) preserves the types of codes, that is, the constructed codes from Type II (respectively, Type IV) is also Type II (respectively, Type IV). Every Type II (respectively, Type IV) code over $\mathbb{F}_2+u\mathbb{F}_2$ of free rank larger than three (respectively, one) can be obtained via the second construction (respectively, the first one). Using these constructions, we update the information on self-dual codes over $\mathbb{F}_2+u\mathbb{F}_2$ of length 9 and 10, in terms of the highest minimum (Hamming, Lee, or Euclidean) weight and the number of inequivalent codes with the highest minimum weight.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1088-1092
• /
• 2018

In this paper, we propose a dual-mode frequency tripler using push-push and stacked FET structures. The proposed circuit can operate either in frequency multiplier mode or in amplifier mode. In the frequency multiplier mode, push-push frequency multiplication is achieved by allowing input signals with particular phase shifts. In the amplifier mode, the device operates as a distributed amplifier to obtain high gain. Also both modes were designed using stacked FET structure. The designed circuit showed frequency tripled output power of 9.7 dBm at 2.4 GHz with the input at 800 MHz. On the other hand, in the amplifier mode, the device showed 8.9 dB of gain to generate 19.5 dBm at 800 MHz.