• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.123-126
• /
• 2005

In this paper, we propose a multiple slotted dual-band square patch antenna with CP(Circular Polarization) characteristic. And we present the simulation and measurement results of the design example. We designed a slotted patch antenna by using computer simulation program, Zeland IE3D, and then some tuning followed with measurements. Measured -10dB bandwidths of $S_{11}$ characteristic are 127MHz($2.346GHz{\sim}2.473GHz$) for the low-band, and 122MHz($3.379GHz{\sim}3.501GHz$) for the high-band, respectively. And measured maximum gains and half-power beamwidths are 6.94dBi, $72.95^{\circ}$ for the low-band at 2.30GHz, 5.78dBi, $76.51^{\circ}$ for the high-band at 3.45GHz, respectively.

• 한국전자파학회논문지
• /
• 제20권2호
• /
• pp.141-146
• /
• 2009

본 논문에서는 인위적인 커패시턴스 값의 변화에 따라서 공진 주파수가 이동하여 다중 대역을 포함하는 이중 대역 공진 주파수 변환 안테나를 제안하였다. 인위적인 커패시턴스 값의 변화는 버랙터 다이오드 조절의 선행연구로써, 칩 커패시터를 이용해 주파수 변환 범위와 안테나 특성에 관해 분석하였다. T자 모양 슬릿의 짧은 부분에 장착된 서로 다른 칩 커패시터는 안테나의 입력 임피던스의 변화를 준다. 변화된 입력 임피던스는 안테나의 방사 패턴의 변화 없이, 일정한 범위 내에서 이중 대역 공진주파수를 유지하면서 가변함을 실험을 통해 검증하였다. 제안한 안테나의 공진 주파수는 저주파 대역과 고주파 대역에서 각각 400 MHz, 200 MHz의 범위안에서 변화가 가능하다. 또한, 10 dB 반사 손실 대역폭은 저주파 대역에서 $0.78{\sim}1.21\;GHz$, 대역폭 10 MHz를 가지며, 고주파 대역에서는 $1.97{\sim}2.17\;GHz$, 대역폭 50 MHz를 가진다. 제안한 안테나는 저주파 대역에서 0 dBi, 고주파 대역에서 3 dBi의 안테나 이득을 갖는다.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.811-818
• /
• 2013

In this paper, we have designed the elliptical dual offset gregorian antenna which can use Ka band earth station antennas in the fixed-satellite service. The structure of antenna is increasing the antenna gain by decreasing blockage areas and decreasing wind effects by shortening height of the antenna. The corrugate horn antenna for this antenna has symmetric radiation patterns and low side lobe levels that can meet ITU-R envelope. The distribution of electric field on a aperture of main reflector is calculated by an ray-tracing method that use the radiation pattern of the feed horn. The final geometric of antena is decided by choosing the distribution that comply with antenna requirement. The FEKO analysed electrical performance of this antenna. The fabricated antenna has 45.0dBi(@30.0GHz)/41.7dBi(@20.2GHz), high efficiency and low side lobe level that meet ITU-R S. 580-6 envelope.

• Journal of information and communication convergence engineering
• /
• 제12권1호
• /
• pp.1-7
• /
• 2014

A novel design of a simple circular ring with open-ended monopole antenna for wireless local area network (WLAN) applications is proposed in this article. The proposed antenna consists of an open-ended circular ring and $50-{\Omega}$ microstrip feed-line. The proposed antenna is capable of generating two separate resonant modes with good impedance-matching conditions. A prototype of the proposed antenna is designed, fabricated, and measured. Acceptable agreement between the measurement and simulation results is achieved. Experimental results show that the proposed antenna has operating bandwidths of 1.99-3.04 GHz and 5.08-6.1 GHz with a return loss of less than -10 dB, covering the required bandwidths of the 2.4/5.2/5.8-GHz WLAN standards. This is a microstrip antenna for IEEE 802.11a/b wireless local area networks applications. Meanwhile, the two-dimensional (2D) radiation patterns and three-dimensional (3D) gain performance of the antenna are also observed and discussed.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.241-245
• /
• 2002

Dual-band microstrip antenna is designed for industrial-scientific-medical(ISM) band of 2.4㎓ and 5.8㎓ using finite-difference time-domain method(FDTD). Cross Patch fed by aperture in the ground plane of microstrip line is proposed as radiation element of antenna, which is 2 rectangular Patch is overlapped. To design antenna, change of input impedance by aperture and stub length change is examined. And it is investigated that center frequency and -10 ㏈ bandwidth by Length of radiation element and width change. Experimental result about reflection Loss confirmed that agree well with analysis results of FDTD and IE3D, And -3 ㏈ beam width, front to back ratio and gain in frequency 2.43㎓ and 5.79㎓ is presented by measuring radiation Pattern of antenna.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.278-282
• /
• 2002

In this paper, a dual-band CPW antenna is designed with the aid of Genetic Algorithm and Finite-Difference Time-Domain method. The design goal is to minimize the magnitude of S$\sub$11/ in the frequency band between 1.8㎓ and 2.4㎓. The resonance frequencies are shifted by about 80MHz and 50MHz from the desired frequencies at 1.8㎓ and 2.4㎓ respectively. But the bandwidth agrees well with that of Simulation.

• 대한전자공학회논문지
• /
• 제25권12호
• /
• pp.1573-1581
• /
• 1988

In this paper, the analysis on the dual mode conical horn antennas is made to realize the optimum horn as the primary feed of the offset parabolic antenna for the domestic broadcasting satellite. Such analysis can give rise to the approximate equations and graphs on the beam width, which makes it possible to design the desired conical horn. It has been shown that the radiation charateristics of designed horn antenna built with the dielectric band inside the horn. The designed dual mode horn antenna may provide the useful basis to practical usage of the antenna in the domestic satellite broadcasting communication systems.

• ETRI Journal
• /
• 제35권3호
• /
• pp.530-533
• /
• 2013

In this letter, a simple method for reducing the size of a dual-band planar inverted-F antenna (PIFA) is described. This method is based on a coupling capacitor connected in parallel to the PIFA feed conductor. The proposed antenna occupies a small ground clearance of $10mm{\times}5mm$ and is able to provide -10-dB impedance bandwidths of 120 MHz and 760 MHz for 2.45-GHz and 5.5-GHz wireless local area network applications, respectively. The measured antenna efficiencies are 71.8% and 73.6%, averaged over the 2.45-GHz and 5.5-GHz frequency bands, respectively.

• Journal of information and communication convergence engineering
• /
• 제10권4호
• /
• pp.321-328
• /
• 2012

A novel design for a simple rectangular ring with open-ended monopole antenna wireless local area network (WLAN) applications is proposed in this article. The proposed antenna consists of an open-ended rectangular ring, an inverted L-strip, and a rectangular slit in the ground plane, and is fed by a 50 ${\Omega}$ microstrip feed-line. Prototypes of the proposed antenna were designed, fabricated, and tested. Experimental results show that the proposed antenna receives 2.3125-2.775 GHz and 4.8625-6.7125 GHz with a return loss less than -10 dB, covering the required bandwidths of the 2.4/5.2/5.8 GHz WLAN standards. Meanwhile, the 2D radiation patterns and 3D gain performance of the antenna in the operation bands were also observed and discussed.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.532-535
• /
• 2003

In this paper, we made study for plastic chip antenna, the plastic is Formax with the circle of PVC and its electric characteristics are dielectric constant 1.9, surface current $10{\Omega}$. The proposed antenna same as the conventional antenna are usually constructed with ceramic chip, which are not fragile in nature and don't tend to break easily. Therefore the proposed antenna with its advantage are attractive for application in mobile antenna. We study the dual-band plastic chip antenna resonated at 800Mhz and 1800Mhz. From this study results, we feel confident of application for mobile phone antenna.