• ETRI Journal
• /
• 제28권5호
• /
• pp.656-659
• /
• 2006

This letter presents a new polarizer which has a simple comb structure inside a circular waveguide. The electrical performance of the proposed comb polarizer is optimized by a circular waveguide radius and by the physical parameters of the comb plates. This polarizer is suitable for providing good performance in millimeter-band application because of its simple structure and low fabrication cost. In our experiments the dual-band comb polarizer designed in band 1(K) and band 2(Ka) showed good electrical performance without any tuning elements.

• 전기의세계
• /
• 제25권1호
• /
• pp.101-103
• /
• 1976

Recently there exist many reports about the results of the theoretical analysis on the influence of screw symmetry structure to the characteristics of EMW propagation in the cylindrical wave-guides loaded with ferrite and, in this paper, an attempt is mode to analyze applying symmetry analysis the wave propagation characteristics in the dual turnstile structure. And one of the results obtained is the values of wave vectors become, in general, different according to the orientation of the geometry in the case of the dual turnstile structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.301-306
• /
• 2004

In this study, Dual servo mechanism with VCM(Voice Coil Motor) and PZT is designed for a high precision force and position control. We designed the VCM actuator and dual servo mechanism with leaf spring. VCM actuators, with their high linearity, simple structure, low weight, and high efficiency, are increasingly being used in micro-positioning applications. There are many kinds of VCM with a structure. VCM actuators are divided into two types by moving parts. One is moving magnet type and the other moving coil type. We described the properties of these two types of VCM. Design parameters of VCM are defined through the FEM simulation analysis of magnetic field and dynamic model of dual servo mechanism. These researches help to for decreasing loss in the air gap of VCM. We present dual servo mechanism is effective mechanism for a force control in hi h precision, properties of designed VCM.

• 한국전자파학회논문지
• /
• 제15권3호
• /
• pp.301-310
• /
• 2004

본 논문에서는 마이크로스트립 공진기에 엇갈린 슬롯과 한 쌍의 spur-line을 삽입한 소형 이중모드(dual-mode)여파기를 제안하였다. 제안한 여파기는 급전선과 공진기 사이에 존재하는 급전 갭(coupling gap)을 없앰으로써 삽입손실의 특성이 향상되었다. 엇갈린 슬롯만 가진 기존의 이중모드 여파기와 비교할 때, 엇갈린 슬롯과 spur-line을 동시에 갖는 이중모드 여파기는 이중모드 특성을 나타내는 섭동의 범위가 상당히 넓기 때문에 이중 모드 여파기의 설계가 용이해졌다. 또한, 제안된 구조의 가장자리에 존재하는 spur-line에 2개의 PIN다이오드를 삽입하여 개폐기 특성을 갖는 여파기로의 응용도 가능하였다. 또한 제안한 구조는 공진기에 삽입된 슬롯과 spur-line에 의해 전기적인 길이가 길어지므로 기존의 구조에 비해 34.7 %의 크기 감소 효과를 얻을 수 있었다.

• 한국해안·해양공학회논문집
• /
• 제22권1호
• /
• pp.10-17
• /
• 2010

투과성 이중 반원통 구조물과 경사 입사파간의 상호작용문제를 선형포텐셜 이론을 사용하여 살펴보았다. 투과성 이중 반원통 구조물은 바닥에 고정된 동심원상으로 배열된 2개의 원통 구조물로 이루어지며 각 원통 구조물의 전면은 일정한 공극율을 갖는 투과벽으로 후면은 투명한 벽으로 구성된다. 전면 투과벽의 공극율과 간격 그리고 파랑특성(주파수, 입사각)을 변화시키면서 파랑하중과 처올림 파형 그리고 파 차단성능을 살펴보았다. 파 차단 성능의 척도로서 차단영역내의 평균제곱 변위의 제곱근(R.M.S.)을 사용하였다. 투과성 반원통 구조물은 불투과성 구조물과 비교하여 차단영역내의 파도응답을 감소시키며 구조물에 작용하는 파랑하중을 크게 줄여준다. 특히 이중 구조물은 고주파주 영역에서 단일 구조물보다 파를 차단하는데 효과적이다.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.111-114
• /
• 2015

In this paper, we have proposed dual-band Phi-shaped slot gap filler antenna for satellite internet service applications. Some properties of the antenna such as return loss, radiation pattern, and gain have been simulated and measured. The proposed antenna has a Phi-shaped slot on the circular patch and is fabricated on the TLX-9 substrate. The radius of the circular patch is 25 mm, and it has a coaxial feeding structure. The dual-band Phi-shaped slot gap filler antenna has high-gain, small-size, simple-structure, and good radiation patterns at each band. The operating frequency band can be tuned by adjusting the length AL and FL of the Phi-shaped slot.

• 전기전자학회논문지
• /
• 제22권4호
• /
• pp.1088-1092
• /
• 2018

In this paper, we propose a dual-mode frequency tripler using push-push and stacked FET structures. The proposed circuit can operate either in frequency multiplier mode or in amplifier mode. In the frequency multiplier mode, push-push frequency multiplication is achieved by allowing input signals with particular phase shifts. In the amplifier mode, the device operates as a distributed amplifier to obtain high gain. Also both modes were designed using stacked FET structure. The designed circuit showed frequency tripled output power of 9.7 dBm at 2.4 GHz with the input at 800 MHz. On the other hand, in the amplifier mode, the device showed 8.9 dB of gain to generate 19.5 dBm at 800 MHz.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.629-634
• /
• 2018

A broad dual-band terahertz metamaterial filter with sharp out-of-band rejections is designed and demonstrated. The center frequencies of the first and the second bands occur at 0.35 THz and 0.96 THz with 3 dB relative bandwidth of 31% and 17%, respectively. Results are measured using a THz time-domain spectroscopy system that shows agreement with simulations. Physical mechanisms of the broad dual-band resonance are clarified based on transmissions of different structures and surface current density distributions. Influence of structure parameters on the transmission characteristics are discussed. Symmetry of the structure ensures the filter polarization independence at normal incidence. These results supported by the design of the filter could find applications in broad multi-band sensors, terahertz communication systems, and other emerging terahertz technologies.

• ETRI Journal
• /
• 제46권3호
• /
• pp.413-420
• /
• 2024

A dual-band bio-implantable compact antenna with a meander-line structure is presented. The proposed meander-line antenna resonates at the industrial, scientific, and medical (2.4 GHz) and wireless medical telemetry (1.4 GHz) bands. The meander-line structure is selected as a radiating patch given its versatile and effective design. With a dimension of only 10 mm × 10 mm × 0.635 mm, the designed antenna is compact. Considering a skin phantom, the proposed antenna was designed, optimized, and simulated. The Rogers RT/duroid 6010 substrate material with high dielectric constant was used to fabricate the meander-line dual-band implantable antenna, which was validated experimentally. The superstrate was made of the same material. Experiments were conducted on skin-mimicking gel. The designed meander-line antenna has a high peak gain of -21 dBi at 2.4 GHz, and its maximum specific absorption rate is compliant with IEEE safety standards.

• 전기학회논문지P
• /
• 제61권1호
• /
• pp.5-9
• /
• 2012

In this paper, multi folded dual monopole antenna for WLAN communication of dual bend is designed and fabricated. The proposed multi folded dual monopole antenna are consisted of two folded rectangle loops by microstrip fed that is modified dual monopole antenna. Therefore, the outside rectangle loop structure of the proposed antenna is extended a dual monopole. The characteristics of the proposed antenna is analyzed return loss and radiation patterns by the FDTD tools. As a result a bandwidth of proposed antenna has about 0.82GHz from 2.0 to 2.82[GHz] and 0.7GHz from 5.46 to 6.16[GHz]. It is used WLAN communications of 2[GHz] and 5[GHz].