• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.8-14
• /
• 2022

A computer simulation was performed to investigate the heat source distribution and temperature distribution of a laser having multiple characteristics. To simulate the actual size of a welding specimen, the temperature distributions at 0 s, 1 s, and 2 s were analyzed by increasing the domain size to 50 mm in length and 25 mm in width in a material of the same thickness. As indicated by the results, because of the characteristics of metals with high thermal conductivity, the temperature at the welding center line and the temperature distribution at the offset position were not significant. When the core part was cooled by irradiating with a laser, it cooled at a rate of up to 500 ℃/s. In contrast, when the laser was irradiated to the ring part, the cooling proceeded at a rate of over 1800 ℃/s. Comparing the relative numerical values rather than the absolute values, it was found that the cooling rate was approximately 3.6 times faster when the laser was irradiated through the ring than when the laser was irradiated through the core. As a result of irradiating with the same heat source (at 100 W) into the core, ring, and ring + core, it was confirmed that the highest temperature was irradiated to the ring part and the lowest temperature was irradiated to the core part.

• Bulletin of the Korean Mathematical Society
• /
• v.55 no.5
• /
• pp.1371-1387
• /
• 2018

The classification of the self-dual codes over Galois rings GR(p, 2) and $GR(p^2,2)$ of length 4 is completed for all primes p up to equivalence in terms of automorphism group. We obtain all inequivalent classes and the number of each classes of self-dual codes for all primes.

• Journal of Korean Society for Quality Management
• /
• v.28 no.1
• /
• pp.105-118
• /
• 2000

In this paper, we consider an interconnection network, DRDT (Dual Receive Dual Transmit), that is a double-loop ring topology and adopts the concept of multiple packets transmission. For three types of DRDT configurations, we investigate some properties related to path sets and discuss the method for finding minimal path sets. Using the concept of the terminal reliability and the path sets approach, we evaluate the reliability of the DRDT networks and compare them with a single ring network and a unidirectional double-loop ring network.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1546-1548
• /
• 1998

Dual mode ring resonators(DMRR) have been fabricated using laser ablated $YBa_2Cu_3O_{7-x}$ superconducting thin films. The transition temperature of YBCO thin films were 85 - 88 K and the film thicknesses were about 5,000 $\AA$. Dual mode ring resonators were patterned by standard photolithography process and wet-etching. Then two-layer metal thin films (Ti/Ag) have been deposited for the ground plane on the back side of substrate by e-beam and thermal evaporation. The input/output feedline angles of each resonator were $60^{\circ}$, $100^{\circ}$, $180^{\circ}$. A network analyzer was used for testing the performance of the resonators in the frequency range of 6-13 GHz at 77 K.

• Korean Journal of Mathematics
• /
• v.17 no.4
• /
• pp.385-397
• /
• 2009

We study codes over the polynomial ring ${\mathbb{F}}_q[D]$ and their projections to the finite rings ${\mathbb{F}}_q[D]/(D^m)$ and the weight enumerators of self-dual codes over these rings. We also give the formula for the number of codewords of minimum weight in the projections.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.411-414
• /
• 2007

In this paper, we studied on characteristic improvement of Balun-BPF using dual-mode ring resonators. The simulated Balun-BPF shows bandwidth of 150MHz at center frequency of 2.45GHz, 4-pole characteristic, return loss of 15dB and symmetrical out-put characteristic.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.739-747
• /
• 2007

Dual-mode bandpass filter was designed by using periodic stepped impedance ring resonator with step perturbation. The periodic stepped impedance ring resonator has the effects of size reduction and $2^{nd}$ harmonic suppression by changing characteristic impedance ratio. The perturbation for dual-mode generation was also easily controlled by characteristic impedance ratio, and the variation of dual-mode resonant frequencies and attenuation pole frequencies were analyzed by the effect of step perturbation. Chip capacitors were used for input/output coupling, and the variation of center frequency by the coupling capacitance and step perturbation was also considered. From the results, two types of 2 GHz dual-mode bandpass filter were fabricated in size of $14{\times}14mm^2$, those have different attenuation poles and bandwidths. The measured results of proposed bandpass filters showed a good agreement with the calculated estimations, and those have insertion loss of 2.52, 0.52 dB and 3 dB bandwidth of 4.03, 15.02 %, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.674-679
• /
• 2007

In this paper, the size of the dual-mode microstrip ring resonator is reduced by adding four open stubs, and bandpass filters having 100 MHz bandwidth are designed at the center frequency of 2 GHz. The size of the ring resonator can be controlled by varying the capacitance of the stubs, and the bandpass filter can be designed in two cases, which are two combinations of the stubs. Two bandpass filters are designed and fabricated by using the two-stage bandpass filter circuit model of the proposed structure, and the measured results show good agreement with the simulated results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.61-62
• /
• 2015

In this paper, a design method for a dual-band compact slot antenna using SRR(split-ring resonator) conductor is studied. The SRR conductor is loaded inside of a rectangular slot of the proposed antenna for dual-band operation. Final design parameters are obtained by analyzing the effects of the gap between the SRR conductor and slot, and the width of the SRR conductor on the input reflection coefficient and gain characteristics. A prototype of the proposed dual-band slot antenna operating at 2.45 GHz WLAN band and 3.40-5.35 GHz band is designed on an FR4 substrate with a dimension of 30 mm by 30 mm.

• Journal of the Korea Society for Simulation
• /
• v.8 no.1
• /
• pp.35-49
• /
• 1999

The CC-NUMA based, distributed shared memory is an emerging architecture for multiprocessor computer systems because of its scalability and easy of programming. In this paper, we analyzed performance of a ring-based, CC-NUMA multiprocessor computer system using a commercial workload targeted for popular OLTP applications. Based on the traces collected from real machines, the characteristics of the commercial workload could be obtained. The simulation results showed that the bottleneck on the ring could be effectively removed by using a dual ring structure. We believe our simulation methodology and results will help us to design better multiprocessor computer systems for commercial application domains.