• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.43-51
• /
• 2007

OneNAND flash combines the advantages of NAND and NOR flash, and has become an alternative to the former. But the advanced features of OneNAND flash are not utilized effectively in demand paging systems designed for NAND flash. We propose delayed dual buffering, a demand paging system which fully exploits the random-access I/O interface and dual page buffers of OneNAND flash demand paging system. It effectively reduces the time of page transfer from the OneNAND page buffer to the main memory. On average, it achieves and 28.5% reduction in execution time and 4.4% reduction in paging system energy consumption.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.427-436
• /
• 2018

HADAX is a serial communication converter of train control computer. It is connected with various signal equipments such as wayside signal equipments, station signal equipments, train control computers, and transmits control information and signal condition information for train control. And transmits information to several electronic interlocking devices through a splitter interface. Since HADAX interfaces with many signaling devices through serial communication, frequent communication connection faults necessitate improvement of performance such as dual system configuration, integration of external splitter, and multi-channelization of communication card. The improved HADAX device should have compatibility with the dimensions of existing enclosure and enclosure, and verify the performance of dual system and splitter integration. Therefore, we verified the performance of HADAX through the route control test, dual system test, and multi-channel communication test with splitter integrated connection by connecting with the existing signal equipment.

• Restorative Dentistry and Endodontics
• /
• v.49 no.2
• /
• pp.18.1-18.13
• /
• 2024

Objectives: This study was conducted to evaluate the mechanical properties of relined and non-relined fiberglass posts when cemented to root canal dentin using a conventional dual-cure resin cement or a self-adhesive resin cement. Materials and Methods: Two types of resin cements were utilized: conventional and self-adhesive. Additionally, 2 cementation protocols were employed, involving relined and non-relined fiberglass posts. In total, 72 bovine incisors were cemented and subjected to push-out bond strength testing (n = 10) followed by failure mode analysis. The cross-sectional microhardness (n = 5) was assessed along the root canal, and interface analyses (n = 3) were conducted using scanning electron microscopy (SEM). Data from the push-out bond strength and cross-sectional microhardness tests were analyzed via 3-way analysis of variance and the Bonferroni post-hoc test (α= 0.05). Results: For non-relined fiberglass posts, conventional resin cement exhibited higher pushout bond strength than self-adhesive cement. Relined fiberglass posts yielded comparable results between the resin cements. Type II failure was the most common failure mode for both resin cements, regardless of cementation protocol. The use of relined fiberglass posts improved the cross-sectional microhardness values for both cements. SEM images revealed voids and bubbles in the incisors with non-relined fiberglass posts. Conclusions: Mechanical properties were impacted by the cementation protocol. Relined fiberglass posts presented the highest push-out bond strength and cross-sectional microhardness values, regardless of the resin cement used (conventional dual-cure or self-adhesive). Conversely, for non-relined fiberglass posts, the conventional dual-cure resin cement yielded superior results to the self-adhesive resin cement.

• Journal of IKEEE
• /
• v.15 no.2
• /
• pp.122-128
• /
• 2011

Although conventional analog linescan cameras are used widely, high-speed, high-resolution Cameralink standard will lead the area of frame grabber industry such as factory automation. In this paper, we are developing embedded frame grabber testbed without PC which will give an another solution to image processing applications. Therefore, we designed hardware schematics and programmed FPGA device with VHDL in order to interface Cameralink standard linescan CCD camera. In the future, our embedded on-chip controller could be applied to various image processing systems such as medical imaging, especially optical coherence tomography, machine vision and industrial electronics.

• Journal of Korean Society on Water Environment
• /
• v.25 no.4
• /
• pp.547-552
• /
• 2009

Because of refractory property of light, the travel path of UV light becomes longer than the straight line and shorter solely in water as UV light passes sequentially through air, quartz and water. Note that water significantly absorbs UV light. Hence, UV intensity shall be estimated to be lower when refraction is neglected than it is considered. Reflection is also critical for the design of UV radiation system. While the reflection at the interface of air and quartz is low enough to ignore, it is too high to be ignored at the interface of quartz and water. Assuming constant power, smaller length to width ratio of UV reactor is beneficial and single-lamp system is preferred to multi-lamps. Under the given cross section, optimal lamp positions could be decided. For example of an elliptical reactor with dual lamps, the optimal lamp locations shall be the 1/3 and 2/3 position of the longer axis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.75-83
• /
• 2008

In this paper, we propose an efficient algorithm that assigns single temporary IPv4 address and port number to improve efficiency of IPv4 address that is allocated in DSTM service. And, we have analyzed the elementary functions for DSTM and have designed the functional modules. Also, we have implemented the DTI interface for encapsulation and decapsulation of IPv6 packets. The performance analysis and comparison are investigated whether the appropriate interworking service is possible or not. Our observation results show that the performance of IPv4 over IPv6 tunneling is suitable to DSTM service due to the reduction of delay by eliminating checksum calculations in the header of IPv6 tunneling.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.236-237
• /
• 2007

Lamination of coated conductor is important to commercialize for electrical stabilizer and mechanical support. It should be known the properties of soldering interface and the variation of superconductivity on coated conductor with various kinds of solders. $SmBa_2Cu_O_x$ thin films were deposited by co-evaporation method (EDDC, Evaporation using Drum in Dual Chambers). 4 kinds of solders were used to investigate interface properties of SmBCO conductors. In-Bi solder could maintain good connection.

• Transactions of Materials Processing
• /
• v.32 no.3
• /
• pp.107-113
• /
• 2023

The importance of dual-fuel engines has increased for reducing CO₂ emissions. However, the low operating temperature of this engine may induce low-temperature corrosion at combustion parts, which reduces the engine service life. To overcome this problem, NiCr38Al4 alloy was developed for valve spindle, but the cost of this alloy is expensive due to its high Cr content. For reducing the manufacturing cost of valve spindle, in the present work, NiCr38Al4 alloy was welded with Nimonic80A alloy by conducting friction welding. The tensile test results show that the strength of friction-welded specimens follows the properties of the lower-strength parent materials, without severe cracks at the interface. The large shear strain and frictional heat from friction welding not only reduce grain size but also induce solute element diffusion at the interfacial region. Because of the low Cr diffusivity compared with Ti, Cr carbides were not observed in the Nimonic80A matrix, while Ti carbides were distributed in both the Nimonic80A and SNCrW matrices.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.151-160
• /
• 2017

Among the methods of developing tourist spots and culture as the experience contents, it is a common method to display high-quality video images on a large display, and it is necessary to make a special difference between the participant's active participation and the visual experience in other regions. In this paper, using the single molecular OLED and active type, the regional tourist spots blend transparent OLED dual-layer display systems with the extended image implementation and augmented interaction techniques to give the participants a real-world experience, such as directing to new experiences and beautiful sights. In this paper, additional images and UI layers are applied to the layers of the images to allow visitors to experience sightseeing information, weather, maps, accommodations, festivals and photo materials with image. In addition to the dual-layer system, it also added a multi-display system that additionally has one vertical 55-inch display on each side, adding to the experience the immersive experience and interface interlocking fun. By using transparent OLED, dual layer panel and 3-channel Multi-image playback technique, the augmented type experience contents which can experience the local attractions in Jeollanamdo province in Korea at all time without any limitation of time and space were developed.

• Journal of Welding and Joining
• /
• v.25 no.2
• /
• pp.55-61
• /
• 2007

Flash butt weldability of 590MPa dual phase steel is carried out under micro metallographical examination and macro mechanical property tests. The objective of present study is to investigate the cause that brings on bond line fracture, and is to improve mechanical properties of the flash butt welded joint. The joint of flash butt welding has a superior tensile property, but has bad formability due to oxide formed at bond interface. The HAZ softening in the weld joint does not show. It was found that mechanical properties were increased with optimizing welding parameters and making application of oil dripping and post-weld heat treatment.