• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.444-446
• /
• 2011

A bidirectional dual active converter with the power factor control capability is proposed as a battery charger. The source side half-bridge acts as a PWM converter that maintains the unity power factor. The battery side half-bridge converter acts as a dual active bridge (DAB) together shares the same DC link voltage with PWM converter. The imbalance voltage phenomenon is eliminated by employing asymmetric duty cycle technique. Simulation results are included to verify theoretical analysis.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.468-477
• /
• 2014

This study proposes an optimized design of a dual active bridge converter for a low-voltage charger in a military uninterrupted power supply (UPS) system. The dual active bridge converter is among various bi-directional DC/DC converters that possess a high-efficiency isolated bi-directional converter. In the general design, the zero-voltage switching(ZVS) region is reduced when the battery voltage is high. By contrast, efficiency is low because of high conduction losses when the battery voltage is low. Variable switching frequency is applied to increase the ZVS region and the power conversion efficiency, depending on battery voltage changes. At the same duty, the same power is obtained regardless of the battery voltage using the variable switching frequency. The proposed method is applied to a 5 kW prototype dual active bridge converter, and the experimental results are analyzed and verified.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.95-100
• /
• 2022

In this paper, a power loss analysis technique of a high-frequency transformer of a bidirectional DAB (Dual Active Bridge) converter is reported. To miniaturize the transformer of the dual active bridge converter, a resonant inductor was designed with an air gap included low-coupled rate state core to combine leakage inductor with the resonant inductor which is required for soft-switching. In this paper, leakage inductance and magnetizing inductance, core material, type of winding and winding method are included in the dual active bridge transformer loss analysis process to enable optimal design at the initial design stage. Transformer loss analysis for dual active bridge with a switching frequency of 200 kHz and maximum output of 5 kW was executed, and elements necessary for design based on the number of turns on the primary side were graphed while maintaining the transformer turns ratio and window area. In particular, it was possible to determine the optimal number of turns and thickness of the transformer, and ultimately, the total loss of the transformer could be estimated.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.9-11
• /
• 2018

본 논문은 넓은 영전압 스위칭 범위와 고효율을 가지는 Split-Capacitor Dual-Active-Bridge 컨버터를 제안한다. 제안한 컨버터는 기존의 Dual-Active-Bridge의 풀-브릿지 구조를 Split-Capacitor 구조로 변경하여 회로를 개선하였다. 비록 제안한 컨버터는 변압기 전류가 기존의 회로보다 2배만큼 높아지지만 6개 스위치의 정격 전압이 절반으로 줄어들며, 넓은 영전압 스위칭 범위를 가진다. 또한 변압기 전류의 증가로 인해, 기존의 컨버터에 비해 1/4만큼 작은 누설 인덕턴스로 같은 전력을 넘길 수 있다. 추가된 커패시터는 변압기 DC 성분에 의한 포화 문제를 막아주며 두 개의 출력을 가질 수 있도록 한다. 제안한 컨버터의 성능을 검증하기 위해 3-kW의 시제품을 제작하여 실험을 통해 증명하였다.

• 전력전자학회논문지
• /
• 제23권5호
• /
• pp.352-358
• /
• 2018

A split-capacitor (SC) dual-active-bridge (DAB) converter is proposed in this study. The DC-link capacitors of input and output are split in the proposed converter. The primary and secondary windings of transformer are connected to the midpoints of the DC-links. Hence, the SC DAB converter can inherently prevent transformer from saturation. Although the switch current stress of the proposed converter is twice that of the conventional DAB converter, the switch voltage stress is reduced by half. Therefore, the proposed converter can reduce switching loss and achieve high efficiency in a high switching frequency. Given the SC structure, the proposed converter can readily be connected to neutral-point-clamped- or half-bridge-type converters. The topology of the proposed converter is presented and the operating principle is analyzed in detail. A 3-kW hardware prototype was built and tested to verify the performance of the proposed converter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.485-486
• /
• 2019

본 논문에서는 정격부하에서 효율이 가장 높으면서 동시에 Zero Voltage Switching(ZVS)를 만족하는 인덕터를 설계하는 방법을 제안한다. 제안하는 인덕터 설계 방법은 주어진 정격에서 스위치에 존재하는 스너버 캐패시터를 고려한 ZVS 식을 구하며, 스위치의 특성을 고려한 Dead-time을 설계하고 이를 통해 인덕턴스를 최소화 한다. 시뮬레이션을 통해 스너버 캐패시터의 전압 파형 및 스위치의 손실을 비교하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.297-298
• /
• 2019

본 논문에서는 인덕터와 커패시터(LC)를 이용한 새로운 전압 밸런서(VB)를 제안한다. 제안한 VB는 하프-브리지 및 Neutral-Point-Clamped 구조처럼 이중 출력을 가진 Dual-Active-Bridge (DAB) 컨버터에 적용될 수 있다. 제안한 VB는 추가적인 스위칭 소자를 사용하지 않더라도 출력 부하 조건에 관계없이 출력 전압 평형을 유지할 수 있다. 제안한 VB를 사용할 때, 변압기와 출력의 중성점 사이에 LC가 추가되지만, 컨버터의 PWM 방식과 동작은 기존과 대부분 동일하다. 따라서, 제안한 VB를 사용하는 이중 출력 DAB 컨버터는 기존 이중 출력 DAB 컨버터의 장점을 대부분 유지한 상태로 출력 전압 평형을 달성할 수 있다. 3 kW 시제품을 제작하여 제안한 VB의 성능을 검증하였다.

• 전력전자학회논문지
• /
• 제25권4호
• /
• pp.286-292
• /
• 2020

This study proposes a power decoupled multi-port dual-active-bridge (DAB) DC-DC converter employing multiple transformers. Conventional multiport DAB DC-DC converters experience a power coupling issue from the use of a single transformer, which essentially requires complex power decoupling control. To solve this issue, a multiport DAB DC-DC converter employing multiple transformers is proposed to decouple output power without additional complex control algorithms. The proposed converter uses multiple transformers that can expand output ports easily. Therefore, transformers and the proposed multi-port DAB converter can be designed simply. In addition, the number of coupling inductors can be reduced in the proposed three-port DAB converter compared with that in conventional multiport DAB converters. The power decoupling characteristics and equivalent circuit of the proposed converter are analyzed using theoretical model approaches. Finally, a 3-kW laboratory prototype is developed to verify the effectiveness of the proposed converter.

• 전력전자학회논문지
• /
• 제22권2호
• /
• pp.102-108
• /
• 2017

Proper design guides are proposed for a practical dual-active bridge (DAB) converter based on the mathematical model on the steady state. The DAB converter is popular in bidirectional application due to its zero-voltage capability and easy bidirectional operation for seamless control, high efficiency, and performance. Some design considerations are taken to overcome the limitation of the DAB converter. The practical design methodology of power stage is discussed to minimize the conduction and switching losses of the DAB converter. Small-signal model and frequency response are derived and analyzed based on the generalized average method, which considers equivalent series resistance, to improve the dynamics, stability, and reliability with voltage regulation of the practical DAB converter. The design of closed-loop control is discussed by the derived small-signal model to obtain the pertinent gain and phase margin in steady-state operation. Experimental results of a 3.3 kW prototype of DAB converter demonstrate the validity and effectiveness of the proposed methods.

• 전력전자학회논문지
• /
• 제22권2호
• /
• pp.150-158
• /
• 2017

This study proposes a new pulse-width modulation switching pattern for the low conduction loss of a three-level neutral point clamped (NPC)-based dual-active bridge (DAB) converter. The operational principle for a bidirectional power conversion is a phase-shift modulation. The conventional switching method of the three-level NPC-based DAB converter shows a symmetric switching pattern. This method has a disadvantage of high root-mean-square (RMS) value of the coupling inductor current, which leads to high conduction loss. The proposed switching method shows an asymmetrical pattern, which can reduce the RMS value of the inductor current with lower conduction loss than that of the conventional method. The performance of the proposed asymmetrical switching method is theoretically analyzed and practically verified using simulation and experiment.