• 제목/요약/키워드: Ds

Search Result 2,504, Processing Time 0.032 seconds

The Effects of Pressure, Temperature and Solvent Composition on Solvolysis of trans-[Co(N-eten)$_2Cl_2]^+$ in Water-t-butyl Alcohol Mixture

  • Park Yu Chul;Cho Young Je
    • Bulletin of the Korean Chemical Society
    • /
    • v.9 no.1
    • /
    • pp.1-4
    • /
    • 1988
  • Rates of solvolysis of trans-[Co$(N-eten)_2Cl_2$]$^+$ have been investigated using spectrophotometric method at various pressures and temperatures in the mixtures of water with the t-butyl alcohol which possesses a high structure inducing capacity in water. The values of ${\Delta}V^{\neq}$ obtained from pressure effect on the rate constants were 2.55∼ 5.83 $cm^3mol^{-1}$. These values were discussed in terms of dissociative mechanism. Extrema found in the variation of ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$ with solvent composition correlated with extrema in the variation of the physical properties of the mixtures. The logarithms of rate constants correlated linearly with both Grunwald-Winstein parameter and the reciprocal of dielectric constant ($Ds^{-1}$). The gradient, m of Grunwald-Winstein plot for the trans-[Co$(N-eten)_2Cl_2$]$^+$ was 0.09, which is significantly lower than those for the other cobalt (Ⅲ)-dichloro complexes. It was suggested that the reaction is an Id mechanism with long extension of Co-Cl bond in the transition state, as found for the C-Cl bond in the transition state for the solvolysis of t-butyl chloride.

Expansion behavior of low-strength steel slag mortar during high-temperature catalysis

  • Kuo, Wen-Ten;Shu, Chun-Ya
    • Computers and Concrete
    • /
    • v.16 no.2
    • /
    • pp.261-274
    • /
    • 2015
  • This study established the standard recommended values and expansion fracture threshold values for the content of steel slag in controlled low-strength materials (CLSM) to ensure the appropriate use of steel slag aggregates and the prevention of abnormal expansion. The steel slags used in this study included basic oxygen furnace (BOF) slag and desulfurization slag (DS), which replaced 5-50% of natural river sand by weight in cement mixtures. The steel slag mortars were tested by high-temperature ($100^{\circ}C$) curing for 96 h and autoclave expansion. The results showed that the effects of the steel slag content varied based on the free lime (f-CaO) content. No more than 30% of the natural river sand should be replaced with steel slag to avoid fracture failure. The expansion fracture threshold value was 0.10%, above which there was a risk of potential failure. Based on the scanning electron microscopy (SEM) analysis, the high-temperature catalysis resulted in the immediate extrusion of peripheral hydration products from the calcium hydroxide crystals, leading to a local stress concentration and, eventually, deformation and cracking.

Simple Model of Bright-room Contrast Ratio Measurement System for Plasma Display Panels with Contrast Enhancement Film

  • Beom, Tae-Won;Park, Gi-Chan;Park, Jong-Rak;Kim, Young-Sik;Zhang, Jun;Song, Bu-Seup;Chun, Jong-Pil;Yoon, Ki-Cheol;Jang, Won-Gun
    • Journal of the Optical Society of Korea
    • /
    • v.15 no.1
    • /
    • pp.38-43
    • /
    • 2011
  • We have developed a simple model of a bright-room contrast ratio (BRCR) measurement system for plasma display panels (PDPs) adopting a contrast enhancement film (CEF) by using an illumination design tool. Only four model parameters were used, namely, total ambient illumination power delivered by fluorescent lamps, a panel scattering rate, illuminance of PDP white patterns, and the absorption coefficient of a color adjusting film. These parameters were determined by simple optical measurements and matching simulations. The proposed model was employed to predict the BRCR values of four different CEF samples, and the simulated ones were found to be in agreement with measured ones within about 10% relative-error.

Influence of Various Cyclodextrins on the Stability of Hydrocortisone 17-Butyrate in Aqueous Solution

  • Chun, In-Koo;Kim, Bo-Young
    • Archives of Pharmacal Research
    • /
    • v.15 no.2
    • /
    • pp.176-183
    • /
    • 1992
  • The stabilizing effects of $\alpha$-$\beta$-$\gamma$- and dimethyl-$\beta$-cyclodextrins $(\alpha$-, $\beta$-, $\gamma$- and DM-$\beta-$-CyDs) on the degradation of hydrocortisone 17-butyrate (HC-17B) in aqueous solution was investigated. Hc-17B underwent a facile hydroxide ion-catalyzed rearrangement to the less active 21-butyrate ester by the apparent first-order kinetics, and maximum stability of HC-17B was obtained at around pH 4.0. The stability of HC-17B was increased by inclusion complexation with $\alpha$-, $\gamma$- and DM-$\beta$-CyD in the pH range of 2.0-8.0 examined, whereas $\beta$-CyD accelerated the degradation of HC-17B at the pH higher than 5.0. The effects of ionic strength, solvent, temperature and CyD concentration were also investigated. Stability constants and apparent degradation rate constants of HC-17B-$\gamma$-CyD and HC-17B-DM-$\beta$-CyD complexes were determined kinetically on the basis of 1:1 complexation. The results suggested that the inclusion complexation with $\gamma$-CyD or DM-$\beta$-CyD was most useful means to enhance the stability of the steroid.

  • PDF

Standard Terminology System Referenced by 3D Human Body Model

  • Choi, Byung-Kwan;Lim, Ji-Hye
    • Journal of information and communication convergence engineering
    • /
    • v.17 no.2
    • /
    • pp.91-96
    • /
    • 2019
  • In this study, a system to increase the expressiveness of existing standard terminology using three-dimensional (3D) data is designed. We analyze the existing medical terminology system by searching the reference literature and perform an expert group focus survey. A human body image is generated using a 3D modeling tool. Then, the anatomical position of the human body is mapped to the 3D coordinates' identification (ID) and metadata. We define the term to represent the 3D human body position in a total of 12 categories, including semantic terminology entity and semantic disorder. The Blender and 3ds Max programs are used to create the 3D model from medical imaging data. The generated 3D human body model is expressed by the ID of the coordinate type (x, y, and z axes) based on the anatomical position and mapped to the semantic entity including the meaning. We propose a system of standard terminology enabling integration and utilization of the 3D human body model, coordinates (ID), and metadata. In the future, through cooperation with the Electronic Health Record system, we will contribute to clinical research to generate higher-quality big data.

Novel Adaptive Distributed Compressed Sensing Algorithm for Estimating Channels in Doubly-Selective Fading OFDM Systems

  • Song, Yuming;He, Xueyun;Gui, Guan;Liang, Yan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.13 no.5
    • /
    • pp.2400-2413
    • /
    • 2019
  • Doubly-selective (DS) fading channel is often occurred in many orthogonal frequency division multiplexing (OFDM) communication systems, such as high-speed rail communication systems and underwater acoustic (UWA) wireless networks. It is challenging to provide an accurate and fast estimation over the doubly-selective channel, due to the strong Doppler shift. This paper addresses the doubly selective channel estimation problem based on complex exponential basis expansion model (CE-BEM) in OFDM systems from the perspective of distributed compressive sensing (DCS). We propose a novel DCS-based improved sparsity adaptive matching pursuit (DCS-IMSAMP) algorithm. The advantage of the proposed algorithm is that it can exploit the joint channel sparsity information using dynamic threshold, variable step size and tailoring mechanism. Simulation results show that the proposed algorithm achieves 5dB performance gain with faster operation speed, in comparison with traditional DCS-based sparsity adaptive matching pursuit (DCS-SAMP) algorithm.

THE SPECTRAL DETERMINATIONS OF THE JOIN OF TWO FRIENDSHIP GRAPHS

  • Abdian, Ali Zeydi;Moez, Amirhossein Morovati
    • Honam Mathematical Journal
    • /
    • v.41 no.1
    • /
    • pp.67-87
    • /
    • 2019
  • The main aim of this study is to characterize new classes of multicone graphs which are determined by their adjacency spectra, their Laplacian spectra, their complement with respect to signless Laplacian spectra and their complement with respect to their adjacency spectra. A multicone graph is defined to be the join of a clique and a regular graph. If n is a positive integer, a friendship graph $F_n$ consists of n edge-disjoint triangles that all of them meet in one vertex. It is proved that any connected graph cospectral to a multicone graph $F_n{\nabla}F_n=K_2{\nabla}nK_2{\nabla}nK_2$ is determined by its adjacency spectra as well as its Laplacian spectra. In addition, we show that if $n{\neq}2$, the complement of these graphs are determined by their adjacency spectra. At the end of the paper, it is proved that multicone graphs $F_n{\nabla}F_n=K_2{\nabla}nK_2{\nabla}nK_2$ are determined by their signless Laplacian spectra and also we prove that any graph cospectral to one of multicone graphs $F_n{\nabla}F_n$ is perfect.

Structure and Function of the Influenza A Virus Non-Structural Protein 1

  • Han, Chang Woo;Jeong, Mi Suk;Jang, Se Bok
    • Journal of Microbiology and Biotechnology
    • /
    • v.29 no.8
    • /
    • pp.1184-1192
    • /
    • 2019
  • The influenza A virus is a highly infectious respiratory pathogen that sickens many people with respiratory disease annually. To prevent outbreaks of this viral infection, an understanding of the characteristics of virus-host interaction and development of an anti-viral agent is urgently needed. The influenza A virus can infect mammalian species including humans, pigs, horses and seals. Furthermore, this virus can switch hosts and form a novel lineage. This so-called zoonotic infection provides an opportunity for virus adaptation to the new host and leads to pandemics. Most influenza A viruses express proteins that antagonize the antiviral defense of the host cell. The non-structural protein 1 (NS1) of the influenza A virus is the most important viral regulatory factor controlling cellular processes to modulate host cell gene expression and double-stranded RNA (dsRNA)-mediated antiviral response. This review focuses on the influenza A virus NS1 protein and outlines current issues including the life cycle of the influenza A virus, structural characterization of the influenza A virus NS1, interaction between NS1 and host immune response factor, and design of inhibitors resistant to the influenza A virus.

Design and Analysis of Universal Power Converter for Hybrid Solar and Thermoelectric Generators

  • Sathiyanathan, M.;Jaganathan, S.;Josephine, R.L.
    • Journal of Power Electronics
    • /
    • v.19 no.1
    • /
    • pp.220-233
    • /
    • 2019
  • This work aims to study and analyze the various operating modes of universal power converter which is powered by solar and thermoelectric generators. The proposed converter is operated in a DC-DC (buck or boost mode) and DC-AC (single phase) inverter with high efficiency. DC power sources, such as solar photovoltaic (SPV) panels, thermoelectric generators (TEGs), and Li-ion battery, are selected as input to the proposed converter according to the nominal output voltage available/generated by these sources. The mode of selection and output power regulation are achieved via control of the metal-oxide semiconductor field-effect transistor (MOSFET) switches in the converter through the modified stepped perturb and observe (MSPO) algorithm. The MSPO duty cycle control algorithm effectively converts the unregulated DC power from the SPV/TEG into regulated DC for storing energy in a Li-ion battery or directly driving a DC load. In this work, the proposed power sources and converter are mathematically modelled using the Scilab-Xcos Simulink tool. The hardware prototype is designed for 200 W rating with a dsPIC30F4011 digital controller. The various output parameters, such as voltage ripple, current ripple, switching losses, and converter efficiency, are analyzed, and the proposed converter with a control circuit operates the converter closely at 97% efficiency.

Review of Potential Import Restrictions by Japan on Korean Fishery Products - A Focus on Radionuclides Dispute between Korea and Japan - (일본의 한국산 수산물 수입규제 가능성 검토 - 한·일 방사능 분쟁을 중심으로 -)

  • Lim, Byeong-Ho;Hong, Suk-Gu;Yoo, Jin-Hee
    • Korea Trade Review
    • /
    • v.44 no.6
    • /
    • pp.119-134
    • /
    • 2019
  • This study focuses on a recent WTO SPS dispute related to Korea Import Bans and Testing and Certification Requirements for Radionuclides (DS495) in order to learn from the case and take proactive measures to prevent potential import restrictions by Japan on Korean seafood. Korean-Radionuclides (Japan) emphasizes the importance of sufficient scientific evidence, especially scientific information from relevant international organizations, in an effort to take preventive measures towards Japan's restrictions on Korean seafood imports. Japan claims that a novel parasite, Kudoa septempuctata, in Korean flatfish causes food poisoning. As food poisoning is a serious concern, there is a low possibility that Japan's enhanced monitoring measures would be more trade restrictive than required as prescribed in Article 5.6 of the WTO SPS Agreement. In addition, Korea is the biggest exporter of olive flounder to Japan. Hence, the possibility that similar conditions could be established is low in relation to non-discriminatory principles under the WTO SPS Agreement. Accordingly, we should collect relevant scientific evidence, improve domestic sanitary management of fishery products, and seek export diversification so that we prepare for potential import restrictions by Japan and minimize implications.