• 한국식품과학회지
• /
• 제21권5호
• /
• pp.676-685
• /
• 1989

농가에서 현재 사용되고 있는 고추건조기의 운전조건을 고추의 건조 모델과 품질변화 모델을 수치해석적 최적화방법인 Box의 complex 방법과 연결하여 최적화를 시도하였다. 주어진 carotenoids. 보존을 만족시키는 제한조건 하에서 에너지소비를 최소화하기 위한 열풍온도, 열풍재순환율, 풍량이 결정되었다. 품질제한 조건이 엄격할수록 낮은 열풍재순환율과 높은 풍량이 사용되어 에너지소비는 증가하고 전체 건조시간은 짧아졌다. 건조 중 건조기내에서 고추의 혼합이 에너지 사용효율과 제품품질을 향상시킬 수 있었다. 현재 사용되고 있는 풍량은 최적운전을 위해서는 증가되어야 하는 것으로 판단되었다. 풍량을 일정하게 적정조건으로 고정하고 열풍의 온도와 재순환율을 2단계로 변화시키는 건조방식이 에너지소비를 더욱 감소시킬 수 있었다. 이러한 2단계 최적건조에서는 단계이동은 전체 건조시간의 약 1/3 부근에서 이루어지고 열풍온도는 첫 단계에서 낮다가 두 번째 단계에서 증가하고 열풍재순환율은 단계변화에 따라 약간 증가하였다. 얻어진 최적제어변수는 건조기내에서의 건조과정과 carotenoids 파괴 kinetics에 의하여 해석될 수 있었다. 얻어진 결과의 실험적 확인이 요청된다.

• Journal of Biosystems Engineering
• /
• 제35권6호
• /
• pp.401-407
• /
• 2010

In this study, computer simulations were conducted to assess the use of a circulating concurrent-flow dryer for rapeseed drying and to determined the effect of this drying method on the germination ratio of rapeseed after the drying process was complete. The simultaneous heat and mass transfer between air and rapeseed in a concurrent-flow dryer was examined by simulation. The drying simulation was based on several parameters with sequent time series. Equations concerning air psychrometrics, physical properties, thermal properties, equilibrium moisture content, thin layer drying of rapeseed, etc. were all combined to solve the simulation models. Based on energy and mass transfer in the concurrent-flow drying model, a simulation program for the circulating concurrent-flow rapeseed dryer was built along with a detailed description of the mathematical solution to the model. A pilot scale circulating concurrent-flow dryer(200 kg/batch) was used to verify the fitness of the simulation program. A comparison between the experimental data and the model predicted results was presented and discussed. The drying parameters and germination ratio were analyzed and the accuracy of the simulation program was evaluated. The simulation program proved to be reliable and was shown to be a convenient tool for predicting rapeseed drying and germination ratio of rapeseed in a concurrent-flow dryer.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 하계학술발표대회 논문집
• /
• pp.218-218
• /
• 2007

• 수산해양교육연구
• /
• 제29권3호
• /
• pp.888-898
• /
• 2017

Tenebrio molitor larvae, also known as yellow mealworms (MW), are rich in protein and lipid and can serve as a potential alternative protein and energy source in commercial aquafeeds. Therefore, this study attempts to evaluate the effects of different drying methods on the nutritional value of MW meal. For this, live MW were cold-anaesthetized before being subjected to three different types of drying methods, including freeze-drying, oven-drying at $60^{\circ}C$ and air-drying at room temperature for three days, and compared for proximate composition and energy content. An in-vivo digestibility test was then conducted to evaluate the nutrient digestibility of MW meal in diets for rockfish, Sebastes schlegeli. A test diet was prepared by mixing the MW meal with a reference diet (Ref) in a 30:70 ratio with chromium oxide as an inert marker at the inclusion level of 0.5%. Rockfish with mean body weight of 150 g were stocked into a fecal collection system equipped with fiberglass tanks of 400 L capacity. Each group of fish was fed one of the experimental diets to apparent satiation for 4 weeks. The results of the proximate analysis showed that drying methods had no significant effect on crude protein, crude lipid, ash and energy contents of MW. Despite being a rich source of protein and lipid, MW meal was deficient in certain amino acids, particularly methionine, and highly unsaturated fatty acids, particularly 22:6n-3 (DHA) and 20:5n-3 (EPA). MW meal showed high digestibility values for protein (93%), lipid (97%) and energy (88%). These results may indicate that MW meal is a nutritious and acceptable feed ingredient, with comparable digestibility values to conventional animal and plant feedstuffs such as fish meal and soybean meal, in practical diet for rockfish at grower stage.

• 산업식품공학
• /
• 제13권4호
• /
• pp.308-313
• /
• 2009

국내 벼 건조기간의 기상조건에 적합한 열펌프를 설계, 제작하여 기본 성능을 측정하고, 건조온도 20-50${^{\circ}C}$ 범위에서 벼 건조실험을 통하여 건조특성 및 소요에너지를 분석하였다. 열펌프는 건압축 냉동 사이클에서 냉동효과는 173.8 kJ/kg이었으며, 냉매순환량은 49.6 kg/hr이었다. 따라서, 성능계수는 5.5로 표준냉동사이클에서 냉매 R-22의 성능계수 4.0에 비해 높은 값을 나타내었으며, 목표 건조공기의 온도 30${^{\circ}C}$ 및 상대습도 40%에 도달하는 시간은 6분 및 7분으로 만족할 만한 수준이었다. 건조온도와 곡온과의 온도차이는 건조온도 21.9${^{\circ}C}$에서는 약 1.5${^{\circ}C}$, 건조온도 48.7${^{\circ}C}$에서는 약 8.5${^{\circ}C}$로서, 건조실에서 상승한 곡온은 템퍼링실에서 충분한 냉각이 이루어지는 것으로 판단되었다. 건조온도 21.9, 30.7 38.8 및 48.7${^{\circ}C}$에서 건조속도는 0.29, 0.61, 0.85 및 1.25%/hr로 나타나 상용건조기와 유사한 수준이었다. 건조온도 21.9${^{\circ}C}$에서 소요에너지는 325 kJ/kg, 건조온도 30.7, 38.8 및 48.7${^{\circ}C}$에서는 667, 692 및 776 kJ/kg로 나타나 외기조건에 따라 건조소요에너지의 차이가 발생했지만, 화석연료를 사용하는 상용 화력건조기의 벼 건조소요에너지 4,000-5,000 kJ/kg에 비해 평균 86% 절감되는 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제52권1호
• /
• pp.47-57
• /
• 2024

Solar energy is one of the most promising options for renewable energy and biomass is one of them. One of the main biomass sources, sugarcane bagasse, is produced annually in more than hundreds of nations worldwide exceeding 4.25 billion tons. To dry a 900-mm deep fixed bed of wet sugarcane bagasse, a solar air heater with a collector area of 2 m² was installed. Between October 10^th to 19^th in Gwangju, South Korea, a 9-day drying period, the solar collector received a total of 496,145 kJ of solar radiation. During this time, 54.5 kg of water was extracted from 133 kg of wet sugarcane bagasse (average green moisture content of 47.6%_w.b.). The estimated net heat from the evaporation of water removed during the dying period accounted for approximately 27% of the total solar radiation on the solar collector.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.19-29
• /
• 2006

Drying is the least developed of all unit operations of paper and board manufacture. While groundbreaking developments were Introduced during the several past decades in forming, pressing and calendering, no radical changes occurred in drying. The cylinder-drying technology is now more than 200 years old and, while it was subject to many incremental improvements, many of its inherent problems persist. We believe that conventional drying is now approaching the end of its life and the industry is ready for a major breakthrough in drying. Indeed several innovative technologies already exist at various stages of development or commercialization. In general, the novel drying technologies are striving to increase the drying rate, improve the product quality and boost the energy efficiency of drying. A novel, drying method, $Papridry^{TM}$, which combines conductive and convective heat transfer to obtain very high drying rates, is at an advanced stage of development at Paprican. The results obtained when drying printing paper ana board on a self-standing pilot $Papridry^{TM}$ machine and on the pilot paper machine equipped with a tandem of two $Papridry^{TM}$ units demonstrate both, the high drying rate and improved product quality achieved by using this drying method. A mathematical model of this operation has been developed and the software compiled with this model was used to calculate the effect of installing a $Papridry^{TM}$ unit into an existing dryer section. The model also allows to calculate the z-direction distribution of moisture and temperature at various points of the dryer section.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.98-103
• /
• 2015

The reduction of the energy consumption in papermaking process become more important issue because of the regulation of green house gas (GHG) emission. Since more than half of energy for papermaking process is consumed during drying process, the increase of the drying efficiency would be very important solution for saving energy and reduction of GHG emission. The improvement of drying efficiency could be very difficult for the liner board mill because the liner board are usually made of recycled paper, OCC (old corrugated container). The short fiber and fines originated the OCC lead to compact sheet structure and delay the water flow out during wet pressing process and drying process. The application of lignocellulose spacer could provide more loose wet sheet structure and result in the higher drainage rate and the improved drying efficiency. In this study, the effects of the application of lignocellulose spacer to the liner board mill were evaluated based on the mill trial. In order to overcome the common disadvantage of the spacer, the loss of strength properties, the spacer was pretreated with amphoteric polyelectrolyte during mill trial. The results showed the application of pretreated spacer improved the drying efficiency by reducing steam consumption. And the loss in the strength properties by the spacer could be supplemented by the pretreatment.

• 한국축산식품학회지
• /
• 제40권5호
• /
• pp.813-830
• /
• 2020

In this study, the potential of infrared assisted freeze-drying (IRAFD) was tested for the production of shelf-stable edible insects: Protaetia brevitarsis larva (larva of white-spotted flower chafer). The IRAFD system was customized using an infrared lamp, K-type thermocouple, controller, and data acquisition system. The infrared lamp provided the sublimation energy for rapid freeze-drying (FD). The IRAFD conditions were continuous IRAFD-5.0 kW/㎡ and IRAFD-5.0 kW/㎡ at different weight reduction (WR) (10%, 20%, and 30%). The continuous IRAFD reduced the drying time to 247 min compared to the 2,833 min duration of FD (p<0.05). The electrical energy could be reduced by more than 90% through infrared radiation during FD (p<0.05). The Page model resulted in the best prediction among the tested drying kinetic models. In terms of quality, IRAFD showed significantly lower hardness, chewiness, and higher protein levels than hot air drying and FD (p<0.05). IRAFD better preserved the glutamic acid (6.30-7.29 g/100 g) and proline (3.84-5.54 g/100 g). The external product appearance after IRAFD exhibited more air pockets and volume expansion, which might result in a good consumer appeal. In conclusion, this study reports the potential of IRAFD in producing shelf-stable and value-added edible insects.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.24-29
• /
• 2013

In this study, we investigated the applicability of PCC(precipitated calcium carbonate) as a raw material for the manufacture of duplex-board. Papers were made with white-ledger stock collected from the actual duplex-board mill and PCC in a laboratory, and paper properties including bulk, ash content, tensile strength, burst strength, brightness and opacity were measured. The effect of PCC on the drying energy of duplex-board was also determined by measuring the moisture content of wet web and calculating drying energy reduction. PCC increased bulk and ISO brightness significantly, which means PCC can decrease the use of virgin pulp and recycled fibers. PCC decreased the moisture content of wet web, which means PCC can decrease drying energy consumption. However, paper strength decreased as addition levels of PCC addition increased. Therefore, the addition level of PCC must be determined considering the reduction of paper strengths.