• Journal of the Korean Ceramic Society
• /
• v.32 no.11
• /
• pp.1283-1291
• /
• 1995

The electrical conductivity, flammable gas response and their humidity effect of porous ZnO, added with 5wt% corn starch as the fugitive phase, were examined. Porous ZnO showed different conductivity curves during increasing and decreasing temperature, and its electrical conductivity decreased rapidly by desorption of OH- between 20$0^{\circ}C$ and 35$0^{\circ}C$ when the temperature increased in dry air. The CO gas sensitivity of starchadded ZnO samples was higher than that of ZnO without starch addition. The sensitivity of porous, starchadded ZnO to 200ppm CO gas was much less in humid atmosphere than in dry atmosphere since water vapor increased the conductivity of porous ZnO in air, but decreased the conductivity in CO. Maximum sensitivity to 200 ppm CO gas balanced by air was about 100 in dry atmosphere and about 15 in RH 23% atmosphere.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.253-255
• /
• 2008

This paper gives a basic data of the surface discharge characteristics for epoxy resin in Dry-Air. Used electrodes are needle to plane, sphere to plane and KS M3015 electrodes. With the changing electrodes in same condition, we can obtain different creeping lengthes, breakdown voltages and dielectric strengths, respectively. Dielectric strengths of Needle to plane electrodes are more higher than the others. Breakdown voltage and dielectric strength increase as the thickness of epoxy resin and creeping strength increase.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.257-259
• /
• 2008

현재 산업사회의 발달과 더불어 신뢰성 높은 양질의 전기에너지와 운전 및 보수의 간편화, 계통운용의 신뢰성의 확보가 요구되고 있다. 또한 $SF_6$을 대체할 친환경적인 절연매체의 개발이 절실히 요구되고 있다. 이에 본 연구는 모의 GIS내 친환경적인 절연재료인 질소($N_2$)와 건조공기(Dry-Air)의 기본적인 절연특성을 구명함하였다. 또한 본 실험의 조건내에서 절연설계식을 도출하여 각종 전력응용 설비의 절연매체로 사용가능 시 기초자료로 사용 가능할 것으로 사려된다.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.194-195
• /
• 2007

$SF_6$ gas used widely as insulating component in electric power industry has excellent in insulation and arc extinguishing performance in gas-insulated switchgear. However, the concern about eco-friendly alternative gas is currently rising because $SF_6$ gas is one of the main greenhouse gases. In this paper, dry-air and composite-insulation (dry-air+epoxy) as the alternative technology for $SF_6$ gas insulation is studied. Under the gas pressure ranged from 0.1 to 0.6MPa, the breakdown voltage of dry-air were measured in AC electric field. The data of composite-insulation were acquired by changing the thickness of epoxy used in each composite-insulation under the same condition.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1428-1429
• /
• 2007

The paper used to the Neral Netwok for a forecasting conservation system. A neural network is a powerful data modeling tool that is able to capture and represent complex input/output relationships. The motivation for the development of neural network technology stemmed from the desire to develop an artificial system that could perform "intelligent" tasks similar to those performed by the human brain. The true power and advantage of neural network lies in their ability to represent both linear and non-linear relationships and in their ability to learn these relationships directly from the data being modeled. Form results of this study, the Neral Netwok is will play an important role for insulation diagnosis system of real site GIS and power equipment using Dry-Air gas.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1480-1481
• /
• 2007

본 연구는 SF6를 대체하기 위한 건조공기(Dry-Air)의 특성을 연구할 목적으로 교류전압 인가 시 압력(P)변화 및 갭길이의 변화에 따른 절연파괴특성을 연구하였다. 본 연구를 통해 챔버 내의 P가 증가 할수록 절연파괴특성은 증가하는 것을 확인했다. 그리고 불평등전계 보다 평등전계에서 절연파괴특성이 더 증가하고 전극간거리(d)가 증가 할수록 절연파괴특성이 증가하는 것을 확인했다.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.5
• /
• pp.354-361
• /
• 2011

In order to product dry goods of Gastrodiae Rhizoma with high quality, tubers were treated with various dry methods such as cutting, drying methods and steaming. In cutting than no cutting, they were shown shorter drying hours and lower drying yield. Drying hours in freeze drying was shorter than those of hot air and far-infrared ray. Total polyphenol content was higher in cutting than no cutting. According to steaming, it was increased in freeze drying but decreased rapidly in the other dry methods. Among all treatments, hot air dry treatment with cutting and no steaming had the highest total polyphenol content. Gastrodin and 4-hydroxybenzyl alcohol contents generally were similar or higher in cutting than no cutting. By steaming, gastrodin content in freeze drying was decreased but 4-hydroxybenzyl alcohol content was increased. But hot-air and infrared ray dry, they were shown opposite results. Gastrodin and 4-hydroxybenzyl alcohol contents showed opposite reaction to each other and were shown various response by dry methods.

• Restorative Dentistry and Endodontics
• /
• v.29 no.3
• /
• pp.205-211
• /
• 2004

This study evaluated the microleakage and interfacial gap between enamel and composite resin under the dry and wet condition of the enamel surface. V shaped class 5 cavities were prepared on the occlusal portion of extracted human molars. Samples were divided into three groups：D group (air dry for 10-15s), BD group (blot dry with moist cotton pellet), and DR group (air dry for 10-15s and rewet with Aqua-Prep F for 20s), Cavities were filled using Aelitefil composite resin after applied One-Step. Microleakage was tested by 2% methylene blue dye solution and the data were statistically analysed by Kruskal-Wallis test and Mann-Whitney test. Also Enamel-resin interface was observed under SEM. Group BD showed statistically lower microleakage than group D (p < 0.05). but there was no statistically significant difference between group BD and DR (p > 0.05). At the enamel-resin interface, group D showed the gap of $2{\;}{\mu}m$ thickness, but group BD and DR showed close adaptation. In conclusion, the use of blot dry and rewetting agent (Aqua-Prep F) resulted in decreased microleakage and improved adhesion between enamel and resin when using One-Step.

• Journal of Environmental Health Sciences
• /
• v.41 no.2
• /
• pp.116-125
• /
• 2015

Objective: This study was carried out to use pine needles as a passive air sampler (PAS) for atmospheric polychlorinared dibenzo-p-dioxins/furans (PCDD/Fs). Methods: PCDD/Fs concentrations in ambient air ($C_a$, $pg/m^3$) and deposited pine needles ($C_p$, pg/g dry) were analyzed simultaneously from June 1 to December 31. Air samples were taken using two low volume PUF active air samplers with an overall average air volume of approximately $1,200Sm^3$. Pine needles were collected the end of December near the air sampler. PCDD/Fs was analyzed by HRGC/HRMs. Results: A good correlation was shown ($R^2=0.6357$, p=0.0001) between $C_a$ and $C_p$, but a better correlation ($R^2=0.7372$, p<0.0001) existed between the logarithm of octanol-air partitioning coefficient ($LogK_{oa}$) and Log($C_p/C_a$). The average PCDD/Fs sampling rates from air to pine needles were 0.045($0.018-0.185m^3/day-g\;dry$). Conclusion: It was found that pine needles can be used as PAS for atmospheric PCDD/Fs, and they are especially suitable for long time PAS compared to PUF disk PAS.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.14 no.1
• /
• pp.48-72
• /
• 1985