• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.3
• /
• pp.421-426
• /
• 2004

Dry deposition fluxes of inorganic acidic species to the waterbody were measured by the dry deposition sampler (DDS). DDS was composed of three pans filled with pure water. An average concentration increase during the sampling time, after removing an abnormal value if existed, was considered as the input by deposition. Important operation parameters such as the amount of water used and sampling time were determined through a series of laboratory experiments. The deposition flux measured by DDS was compared with that by the water surface sampler developed by Yi et ai. (1997a,b).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.4
• /
• pp.387-398
• /
• 1997

This experiment was to investigate the surface coverage, sward height and dry matter yield of 63 perennial ryegrass cultivars with control cultivar, orchardgrass(Potomac) at different cutting dates(May 25, July 5, August 20 and October 5), in order to select the adaptable cultivars of perennial ryegrass in the middle region of Korea. Four perennial ryegrass cultivars, E.V. Meadea, Aberystwyth S101, Raidor and Real, didn't survive afler sowing. Surface coverage of perennial ryegrass cultivars cut in August 20 was lower than others. Sward height of perennial ryegrass cultivars at each cutting dates was lower than that of orchardgrass. There were no significant differences in sward heights of each cutting date. Dry matter yield of perennial ryegrass cultivars cut in August 20 was lower than others. Total dry matter yield of Oakpark 6% Viktoria, Petra, G. Manawa, and Kangaroo Valley was fell in the range of 11.76 and 10.37t/ha while that of orchardgrass was 12.09t/ha. On the basis of total annual dry matter yield, the adaptability of perennial ryegrass cultivars was classfied as following.

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.671-691
• /
• 1993

To estimate the possibility in the application of TiN ion-plating to the orthodontic appliance, this study investigated frictional force and frictional coefficient between non-ionplated and TiN ion-plated to the orthodontic appliance. The obtained results were as follows : 1. For each group, the frictional force between metal bracket and arch wire in the wet condition was exhibited lower than that in the dry condition. 2. In the dry condition, the frictional force was lowest with fourth group, and it increased in the order of the 3rd, 1st, and 2nd group. Same situation happened in the wet condition. 3. Experimental results using ceramic & plastic bracket showed that group B was lower than group A, and group D was similar to group C. 4. The surface texture after experiment showed that the scratch due to a friction with bracket was observed in an arch wire of dry contition. Also the surface of bracket was rougher than before. 5. We observed that a specimen surface processed with the TiN ion plating was smoother than that of without the TiN ion plating. 6. The surface texture of a metal bracket and an arch wire in the wet condition was observed smoother than that in the dry condition. 7. In the dry condition, the friction coefficient of each specimen was very similar to each other, but in the wet condition, the friction coefficient of specimen processed with the TiN ion plating showed lower values.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.2
• /
• pp.104-110
• /
• 2004

This study was carried out to survey the pollution of bisphenol A(BPA) and total organic carbon(TOC) in surface sediments around Gwangyang bay. BPA is suspected chemicals as endocrine disruption. Gwangyang bay Is located on the mid south coast of Korea. It is a semi-closed bay which Yeosu petrochemical industrial complex, POSCO(Pohang Steel Company) and Gwangyang container harbor are located. The surface sediments were collected at 15 stations with gravity corer at October, 1999, February, May and August, 2000. Also, the stream and intertidal sediment were collected at 5 sites at August, 2000. Concentrations of BPA in surface sediments were in the range of 0.46 to 24.59 ng/g dry wt.. Seasonal range(mean value) of BPA are 0.59 to 9.00(1.88) ng/g dry wt. at October, 0.99 to 2.97(1.57) ng/g dry wt. at February, 0.46 to 24.59(2.53)ng/g dry wt. at May and 0.54 to 2.46 (1.29)ng/g dry wt. at August. BPA was seasonally fluctuated, and the highest mean value and range were detected at May, 2000. BPA was highly distributed in the inner part of Kwangyang bay than Yosu sound. Concentrations of BPA in stream and intertidal sediments showed the highest value in downstream near Yochon petrochemical industrial complex and Yondung stream. It suggests that the source of BPA are industrial wastewater and municipal sewage. TOC in surface sediments were in the range of 0.09∼1.22%. There was no any correlation between the BPA and TOC.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.64-69
• /
• 2015

This study investigates the Horizontal surface discharge characteristics of solid insulators by varying their materials, and the dew-point of dry-air. The methodology of this study is that a quasi-uniform field is first applied to a test chamber. Then, the chamber is filled with dry-air as an insulation gas which pressure is varied from 1 to 6atm while applying an AC voltage to the chamber. The used solid insulators are teflon, polyethlene and polyurethane. As the dew-point is lower and the pressure of dry-air is higher, the flashover voltage of all solid insulators increases more. When each characteristic of the solid insulators is compared under the same gas pressure, the flashover voltage of teflon is the highest. Then, the flashover voltage of polyethlene is higher than that of polyurethane. Moreover, it is observed that the flashover voltage increases as the horizontal distance between the electrodes of each solid insulator become larger, respectively. However, as the pressure is increased, flashover voltage of the solid insulators is saturated. Therefore, selection of cost-effective insulation is needed in order to appropriate pressure.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.1
• /
• pp.8-15
• /
• 2014

In order to evaluating physiochemical properties of soil under minimum tillage and direct seeding cultivation on dry rice paddy, we conducted to analyze the soil physiochemical characteristics in treatment with 2-year minimum tillage and dry direct seeding (2MT), 3-year minimum tillage and dry direct seeding (3MT), and tillage transplanting cultivation (TT). As results of analyzing soil organic matter (OM) contents with 2 cm soil depth of interval from surface to 30 cm, OM contents with surface soil from 0 to 2MT and 3MT were higher than TT, recorded 34.6, 28.1 and $19.8gkg^{-1}$, respectively. But until 20cm in soil depth, it was not so large on the deviation of OM contents among the 3 treatments comparing with 2cm surface. Beneath 20 cm in soil depths, 2- and 3-year, OM contents in TT were distributed to be lower than 2MT and 3MT. The contents of total nitrogen in 2MT and 3MT were higher than the content in TT across the soil profile. Consequently, though minimum tillage and direct seeding farming is obviously the practice to saving of machinery work and labor, other practices such as continuously input OM should be needed to achieve carbon sequestration goal through minimum tillage and direct seeding on dry paddy.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.6
• /
• pp.44-49
• /
• 2013

This study investigates the surface discharge characteristics of solid insulators by varying their materials, their shapes, and the dew-point of dry-air. The methodology of this study is that a quasi-uniform field is first applied to a test chamber. Then, the chamber is filled with dry-air as an insulation gas which pressure is varied from 1 to 6atm while applying an AC voltage to the chamber. The used solid insulators are teflon, polycarbonate, and bakelite. As the dew-point is lower and the pressure of dry-air is higher, the flashover voltage of all solid insulators increases more. When each characteristic of the solid insulators is compared under the same gas pressure, the flashover voltage of teflon is the highest. Then, the flashover voltage of polycarbonate is higher than that of bakelite. Moreover, it is observed that the flashover voltage increases as the diameter and the thickness of each solid insulator become larger and thicker, respectively. However, the thickness of the solid insulators is more critical for increasing the flashover voltage than their diameter.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.521-522
• /
• 2010

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.244-250
• /
• 2019

We investigated the relationship between morphological characteristics and individual dry weight to develop a method for estimating the individual dry weight of sheet form macroalgae: Ulva australis, Ulva linza, Pachymeniopsis lanceolata, and Pyropia yezoensis. In Total, 319 thalli of various sizes were collected at six sites from February 2017 to December 2018. An interspecific allometric exponent of 0.28 was found for length-biomass allometry in four sheet form macroalgae, corresponding to a 1/4-power law for primary producers. The relationships between surface area and individual dry weight, as well as between individual fresh weight and individual dry weight, were found to fit significantly using linear regression equations. This explained 94-99 % of individual dry weight, indicating that surface area and individual fresh weight can be used to accurately estimate individual dry weight. We propose the use of this method when experimental processes do not allow individual dry weight to be measured directly, so researchers can save both time and expense.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.189-194
• /
• 2001

A simultaneous visualization of the behavior of bubbles and dry spots has been carried out for pool boiling of R-1l3 on a horizontal heater. From video imaging and image processing analysis, the formation of bubbles and dry spots occurs simultaneously, and therefore they should be considered as a synchronized concept rather than independent identities. The dry spot density is equivalent to the active site density in the region before CHF. At CHF point, large dry areas due to the coalescence of neighboring dry areas cover the heater surface.