• Geomechanics and Engineering
• /
• v.36 no.6
• /
• pp.589-599
• /
• 2024

Dispersion occurs when clay soil disperses under specific conditions and is rapidly washed away. While there are numerous methods for rectifying it, they are neither cost nor time-effective. The current study used metakaolin and zeolite to improve heavily dispersive clay soil either separately or in combination at 0%, 2%, 4%, 6%, and 8% of the soil weight. After 7 days of curing, the samples were tested to determine the extent of change in the dispersion potential, as well as the improvement of the geotechnical properties of the soil. The results indicated that the addition of 2% zeolite with 6% to 8% metakaolin decreased the dispersion potential considerably. Double hydrometry test findings revealed that the dispersion potential decreased by almost 70% and entered the non-dispersive group; the crumb test also revealed this. Atterberg limits testing indicated a decrease in the plasticity index which reduced the flexibility of the samples. The greatest decrease in PI (67.5%) was achieved with the addition of 8% zeolite plus 8% metakaolin to the soil. The results of density tests revealed that a decrease in the optimal moisture content increased the maximum dry density of soil. This increase in density was a response to the high reactivity of metakaolin with calcium hydroxide and the formation of calcium hydroxide hydrate gel. This eventually caused an increase in the unconfined compressive strength, the greatest increase in strength of about 1.8-fold was observed with a combination of 2% zeolite and 6% metakaolin compared to the unmodified sample.

• Fisheries and Aquatic Sciences
• /
• v.26 no.12
• /
• pp.715-725
• /
• 2023

Microplastic (MP) pollution in aquatic environments is a growing concern worldwide. This study investigated the abundance, types, and attributes of MPs in the surface water at two industrial sites (Avoimitro Ghat and Kalurghat) along the Karnaphuli River in Chattogram, Bangladesh. Sampling was conducted over eight months across three transects encompassing a total area of 500 m at each site. A manta net of 200 ㎛ mesh size was used to sample MPs. The obtained samples were subsequently filtered, enumerated, and characterized using a stereo microscope and imaging software. The mean abundance of MP particles (per km² ) was found higher in Avoimitro Ghat (94,861 ± 57,126) than in Kalurghat (31,343 ± 23,183). A significant statistical difference (p < 0.05) was observed in the mean abundance of MP particles between the wet and dry seasons. The fragment group of MP exhibited the most abundant category, whereas the pellet category displayed the lowest. MPs with an elongated shape prevailed at both locations throughout all seasons. At Avoimitro Ghat, blue-colored MPs demonstrated the highest mean count, while in Kalurghat, the highest mean count belonged to brown-colored MPs. The size distribution of MPs differed between the two sites, with 1-2 mm MPs being plentiful in both seasons and Avoimitro Ghat, whereas MPs ranging from 500 ㎛ to less than 1 mm were abundant in Kalurghat. Ten (10) polymer types were found from Fourier-transform infrared spectroscopy (FTIR) analysis with high levels of polypropylene atactic in both Avoimitro Ghat (32%) and Kalurghat (17%). The findings provide important insights into MP pollution in the Karnaphuli River, which may aid in developing effective strategies to mitigate the impacts of MP pollution on the aquatic ecosystem and human health.

• Anatomy and Cell Biology
• /
• v.57 no.2
• /
• pp.213-220
• /
• 2024

The jugular foramen (JF) is located between the temporal and occipital bones. The JF is a primary pathway for venous outflow from the skull and passage of nerves. Variations are common in this region and may have clinical and surgical implications. To analyze the sexual dimorphism and JF morphology in skulls from Northeastern Brazil. 128 human skulls from the Anatomy Laboratory of the Federal University of Paraíba, 64 male and 64 female, were selected and the JFs analyzed for bone septation and the presence of a dome. Data analysis considered P<0.05 as significant. On at least one side, complete septation was observed in 26 skulls (20.3%), incomplete septation in 93 skulls (72.6%) and 61 skulls (47.6%) did not present septation. In 114 skulls (89%), 47.6% female and 41.4% male, have a unilateral presence of the dome and 71 (55.4%) have it bilaterally. Posterolateral compartment diameters and JF area had higher values on the right side in the total sample and separated by sex (P<0.05). Most morphometric variables of the anteromedial compartment were higher in male than in female (P<0.05), fact that was not observed in the posterolateral compartment (P>0.05). This study showed a higher prevalence of complete septation in males compared to females. Morphometric analysis presented a peculiar morphology of the JF in this study. These results suggests that the surgical approach to diseases that affect the JF may be peculiar to the studied population, confirming the importance of morphological analysis of the skull base.

• Advances in concrete construction
• /
• v.17 no.1
• /
• pp.13-26
• /
• 2024

Due to its capacity to address urgent environmental challenges connected to urbanization and stormwater management, pervious concrete, a sustainable and innovative material, has attracted a lot of attention recently. The aim of this study was to find the engineering characteristics of pervious concrete made from recycled aggregate (RA) at various aggregate-to-cement ratios (A/C) and the addition of 5% (by weight of total aggregate) of both natural and recycled fine aggregate to produce a very sustainable concrete product for a variety of applications. The three distinct aggregate-to-cement ratios, 6, 5, and 4, were used to produce pervious concrete using recycled aggregate in the research approach. The ratio of water to cement (w/c) was maintained at 0.3. Pervious concrete was created using single-sized recycled aggregate that passed through a 12.5 mm sieve and was held on a 9.5 mm sieve, as well as natural and recycled sand that passed through a 4 mm sieve. The production of twelve distinct concrete mixtures resulted in the testing of each concrete sample for dry density, abrasion resistance, compressive and splitting tensile strengths, porosity, and water permeability. A statistical method called GLM-ANOVA was also used to assess the characteristics of pervious concrete made using recycled aggregate. According to the experimental results, lowering the aggregate-to-cement ratio enhances the pervious concrete's overall performance. Additionally, a modest amount of fine aggregate boosts mechanical strength while lowering void content and water permeability. However, it was noted that such concretes' mechanical qualities were adversely affected to some extent. The results of this study offer insight into the viability of using recycled aggregates in order to achieve both structural integrity and environmental friendliness, which helps to optimize pervious concrete compositions.

• Korean Journal of Food Science and Technology
• /
• v.40 no.4
• /
• pp.430-435
• /
• 2008

The sensory characteristics of imported (two dry, two sweet, and one medium dry wines) and domestic (one sweet wine) red wine were evaluated by 250 panels. The preferences of aroma, color, sweetness, tartness, astringency, and overall acceptability were determined by 5-point just-about-right scale. Among six wines, B sample obtained the highest mean overall acceptability score of 3.67 and its chemical and sensory characteristics were as follow: cherry or strawberry aroma, 9.4 brix, 3.7% of sugar content, pH 3.5, 10% of ethanol, 0.14% of tannin, 5.74 mg/mL of total organic acids, and color of $L(12.04{\pm}0.01)$, $a(33.90{\pm}0.19)$, and $b(8.22{\pm}0.00)$. These results revealed that Korean consumers generally prefer sweet taste to dry one, flat taste to bitter one, and fruity aroma to others. Panels preferred a red wine containing high sugar content of $5{\sim}10%$. On the other hand, panels showed low preference to the wine containing tannin above 0.16%. However, these general trends were slightly varied depending on their ages and consuming frequencies.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.5
• /
• pp.98-108
• /
• 2009

The purpose of this study is to analyze the characteristics of limited methods, economics and breeding appropriateness of native and imported ground cover plants in the methodology of a shallow soil rooftop garden. The new shallow soil rooftop gardening method uses a total of 13cm in soil thickness, including 4.5cm of top soil on a 7.5cm rock-wool-mat stacked onto a 1cm roll-type-draining plate. The total construction cost for each method of soil level within the design price standard for SEDUM BLOCK is 89,433won/$m^2$, and for DAKU is 92,550won/$m^2$. By comparing those two methods, the construction cost of the shallow soil artificial foundation methodology is 45,000won/$m^2$; this shows the new method is 50% less expensive than the existing method of shallow soil rooftop gardening. The experiment was executed on the rooftop of the Korean National Housing Corporation to ensure validity of the shallow soil artificial foundation planting, and the sample plants which were imported and grown now in native covering. A list investigating the growing plants was made of the cover rate in each plant class, both while alive and the dry plant weight. The native ground cover plants, Sedum kamtschaticum, Sedum middendorffianum, Allium senescens, Sedum sarmentosum, Aquilegia buergariana, and Caryopteris incana increased the cover rate, live weight and dry weight in the shallow soil artificial foundation method. Among the imported cover plants, Sedum sprium and Sedum reflexum, the cover rate increased and growth conditions improved. However, some species needed weed maintenance. After examination with the less expensive shallow soil artificial foundation method and growth analysis, it was found that rooftop gardens are a low-cost option and the growth of plants is great. This result shows the new method can contribute to the proliferation of rooftop gardens in urban settings.

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.293-300
• /
• 2002

The purpose of this study was to evaluate the clinical effectiveness of hydrophilic primer, which claim to retain adequate bond strength on moistened enamel resulting from moisture or saliva contamination, by comparing the shear bond strength and adhesive failure patterns of brackets bonded using hydrophilic primer and conventional hydrophobic primer. Brackets were bonded to human premolars embedded in metal cylinders utilizing light cured adhesive, primed with either a hydrophilic primer(Transbond fm primer) or a conventional hydrophobic primer(Transbond XT primer). Each sample was exposed to varying degrees of artificial saliva contamination during the priming process. The shear bond strength was measured using a universal testing machine, and the adhesive failure patterns after debonding were visually examined by strereomicroscope and assessed using the adhesive remnant index(ARI). The results were as follows 1. In dry conditions, no significant differences in shear bond strength between Transbond W and Transbond XT primers were found. 2. Transbond MIP primer exhibited a significantly higher shear bond strength than Transbond XT primer in saliva-contaminated conditions, regardless of the degree of contamination. 3. When contaminated with one coat of saliva, Transbond MIP primer did not exhibit significant differences in shear bond strength compared to the dry condition. When contaminated with two coats of saliva, Transbond MIP primer exhibited a singnificantly lower shear bond strength compared to the dry condition. 4. The adhesive remnant index of the adhesive failure pattern had a tendency to decrease, as the degree of saliva contamination increased. Bracket-adhesive interface failure was observed in more than half of the saliva contaminated samples utilizing Transbond MIP primer, whereas the bond failure sites of the Transbond XT primer samples occurred almost exclusively at the adhesive-enamel interface in saliva-contaminated conditions. The results of this study suggest that in cases where moisture control is difficult, Transbond MIP primer is an effective alternative to conventional hydrophobic primers.

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.10-24
• /
• 1979

It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist\ulcornerure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres\ulcornerhing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr\ulcorneresher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.9-9
• /
• 1979

It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist?ure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres?hing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr?esher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.

• Journal of the Korean association of regional geographers
• /
• v.3 no.2
• /
• pp.121-150
• /
• 1997

This Study puts the purpose to explicate the regionalities of land-lease farming by a comparative analisis of the five case study areas in Kungpook Province as the agricultural space system of Teagu metropolitan city. For the regional comparative analysis the province was divided into the three zones with the distance from the central city(Teagu): urban fringes, intermediate and remote zone, and then subdivided into the five regions by farming systems : horticulture, rice-farming, and dry-field farming. The data were collected from 77 land-leasing farmers by questionnaire and interview with farm managers in 5 sample villages representing the regionalities of the above five regions respectively. In spite of relatively restricted scope of the research areas, the analytical results appear remarkable regional differences in the characteristics of land-lease farming within a single agricultural space system. In the final analysis the regionalities of the five land-lease farming regions could be described respectively as follows. (1) Koryong-Gun in the inner urban fringe zone : The developing land-lease farming region of commercialized suburban horticulture with medium scale. (2) Songju-Gun in the outer urban fringe zone : The developing land-lease farming region of highly commercialized horticulture with large scale. (3) Uisong-Gun in the intermediate zone : The stagnated land-lease farming region of commercialized rice-farming with large scale. (4) Yongil-Gun in the intermediate zone : The stagnated land-lease farming region of commercializing dry-field farming with medium scale. (5) Ponghwa-Gun in the remote zone : The stagnated and delayed region in commercializing of intermountain dry-field land-lease farming with small scale. These varied regionalities resulted from the diverse spatiality as a complex of spatial orders and localities. The spatial orders in this study are frequently recognizable as a form of distance-decay, and the locality of a region is determined mostly by the its peculiarity of physical and population conditions. In the comparative analysis of the regionalities the degree of commercialization of a region is a most comprehensive and useful frame of reference because it reflects the degree of development of capitalist land-lease farming. Finally these apparent regional differentiations of land-lease farming within a agricultural space system raise the problem of impracticality of the existing uniform logic on the land-lease farming such as "large scale farms share larger part of leased farmland." This problem suggests the urgent need of reappraisal of many aspatial logics and theories on the land-lease farming.