• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.217-223
• /
• 1988

This study is to examine the cleaningproof by dry cleaning runs and parts(shoulder, belly, butt) of garment leathers tanned chrome. This study is composed of three methods of test; color difference test, surface view by scanning electron micrographs, mechanical properties measurement by KES-FB system. The results obtained were as follows: 1. In stiffening of parts of sample, the belly is the best degree in smoothness, fullness, softness. But that of the butt have been found to be the worst degree and to be thick. 2. In fading of parts, the shoulder is an extreme case, but the belly is the best among three parts. 3. In dry cleaning runs, the view after 3 runs has been found to be the best result. 4. The stiffening after dry cleaning 1 run have been low grade, for the sample absorb much solvent of dry cleaning. And, the fading and the decoloration are to be worse after 5 runs. Because the leather surface is affected by dry cleaning runs.

• Journal of Plant Biology
• /
• v.14 no.4
• /
• pp.19-26
• /
• 1971

The sample stand of Pinus rigida plantation was chosen from those at the Choongnam Forest Experiment Station, Choongnam. The diameter at breast height (D) and the height of tree (H) of each tree in the sample plot of 200$m^2$ were measured yearly a from 1967 through 1969. The stand was 12.7-13.4cm in mean diameter and had a stand density of 2,150 trees per ha. The trunk, branches and leaves of each sample tree were separately weighed according to the stratified clip technique. The allometric relation between D2H and dry weight of trunk (Ws), branches (Wb) and leaves (Wl) were approximated by $$W_s=0.05917 (D^2H)^{0.837}$$ $$W_0=0.00655 (D^2H)^{0.989 }$$ $$W_l=0.04466(D^2H)^{0.690}$$ From the above, the standing crops in the sample stand was estimated to be as much as 76.7, 81.7 and 88.2 tons of dry matter, above ground, per ha in 1967, 1968 and 1969, respectively. Annual net production, as the sum of the biomass newly produced during one year, was estimated at 4.97-5.47 tons per ha per year. The respiratory and the photosynthetic rate deduced from theoretical calculations were 0.045 and 0.74kg of dry matter per kg per year. Tentative estimate of annual respiratory loss was made and annual gross production was roughly estimated at 4.4-4.7 and 10.7-12.9 tons of dry matter per ha per year. The ratio of respiratory loss to gross production was approximately 36-41:1.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.607-617
• /
• 2023

This study aims to analyze whether the performance of the fire extinguisher meets the criteria for the apparent specific gravity property test by calculating the change in internal pressure and the use period of the fire extinguisher as a new one with 5 years, recycled one with 5 years, a new one with 10 years, and a new one with 13 years, respectively. As a result of the experiment, when the internal pressure of the fire extinguisher was 0%, the first, second, and third arithmetic mean analysis of the dry chemical extinguisher according to the use period was found to be condemned. When the internal pressure of the fire extinguisher was 50%, it was measured as 130 ml in sample 12-08-new and analyzed as unsuitable. Also, sample 09-09-new of a new dry chemical extinguisher with 13 elapsed years measured 145ml, which was found inappropriate. All other dry chemical extinguishers were analyzed to be suitable. All were noted suitable when having normal internal pressure of the fire extinguisher, except for sample 09-06 of a new dry chemical extinguisher with 13 elapsed years, which was determined to be unsuitable caused by measuring as 131 ml for experimental value. As a result of experiments, some of the apparent specific gravity tests of dry chemical extinguishers from 10 years to 13 years have found that they are unsuitable for the performance of the fire extinguishers due to the massive phenomenon. Accordingly, it is necessary to reduce the endurance period of dry chemical extinguishers from 10 years to 7 years.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.2
• /
• pp.332-338
• /
• 2020

Objective: Aim of this study was to evaluate the influence of freeze-dried acid whey addition and the use a game meat (fallow deer) on a microbial content and the biogenic amines formation in dry fermented sausages. Methods: The experiment involved dry fermented sausages made in two variants from beef and from fallow deer. Each variant was divided into five groups: control (with a curing mixture), reference (with a sea salt), sample with a liquid acid whey and two samples with the addition of reconstituted freeze-dried acid whey in different concentrations. Changes in lactic acid bacteria (LAB), Enterobacteriaceae content and biogenic amines content were determined. Results: The microbial content changes suggest that addition of acid whey slightly affected LAB content in comparison with the control and reference sample, but the addition of freezedried acid whey resulted in a reduction of Enterobacteriaceae content in the sausages from fallow deer or a similar level in the beef sausages compared with the control and reference sample. Both changes in LAB and Enterobacteriaceae content were more evident in case of sausages made from fallow deer. Addition of acid whey (liquid and a higher amount of freezedried) and use of fallow deer meat to produce the sausages resulted in a significant reduction of total biogenic amines content. Conclusion: The addition of acid whey (liquid and higher amount of freeze-dried) resulted in a significant reduction of total biogenic amines content in dry fermented sausages made from fallow deer meat.

• Journal of the Korean Ceramic Society
• /
• v.27 no.6
• /
• pp.769-776
• /
• 1990

This study deals with the refinement of Hwasun flint clay by grinding, classifying, magnetic separation and acid treatment in sequence. Results are as follows ; 1. Fine kaolinite particles of median size in the range of 4.8 and 1.7$\mu\textrm{m}$ was collected, with the yield of 87.4% by dry grinding and classifying process. 2. It is proven that the iron bearing are of Hwasun flint clay is mainly consisted of chloritoid and iron rich muscovite. 3. As the results of the high gradient magnetic separation, the bleaching and iron removal degree of the dry grinding and classifying sample was 4-58% and 5-62% respectively. 4. As the results of the acid treatment, bleaching and weight loss degree of the dry grinding and classifying sample was reduced to 16-82% and 6-29% respectively.

• Korea Trade Review
• /
• v.47 no.5
• /
• pp.21-37
• /
• 2022

Baltic Dry Index (BDI) is difficult to forecast because of the high volatility and complexity. To improve the BDI forecasting ability, this study apply Bayesian variable selection method with a large number of predictors. Our estimation results based on the BDI and all predictors from January 2000 to September 2021 indicate that the out-of-sample prediction ability of the ADL model with the variable selection is superior to that of the AR model in terms of point and density forecasting. We also find that critical predictors for the BDI change over forecasts horizon. The lagged BDI are being selected as an key predictor at all forecasts horizon, but commodity price, the clarksea index, and interest rates have additional information to predict BDI at mid-term horizon. This implies that time variations of predictors should be considered to predict the BDI.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.713-719
• /
• 2011

The antioxidant activities of the ethanol extract of Arctium lappa were assessed by measuring the 1,1-diphenyl-2-picrylhydrazyl( DPPH) radical scavenging effect, inhibition of $Fe^{2+}$-induced lipid peroxidation, inhibition of malondialdehyde(MDA)-bovine serum albumin(BSA) conjugation reaction and antimutagenic capacities using the Ames test. The DPPH radical scavenging activity and inhibition of $Fe^{2+}$-induced lipid peroxidation of the $Arctium$ $lappa$ ethanol extract significantly increased in a dose-dependent manner. In the radical scavenging assay using DPPH, the $IC_{50}$ of the Arctium lappa extract was 296 ${\mu}g$/assay(1.29 mg of dry sample). In addition, the $IC_{50}$ in the inhibition of $Fe^{2+}$-induced lipid peroxidation was 1,759 ${\mu}g$/assay(7.65 mg of dry sample). This extract also significantly inhibited the MDA-BSA conjugation reaction with an $IC_{50}$ of 57.58 mg/assay(250 mg of dry sample). However, no inhibitory effects against the direct and indirect mutagenicities in $Salmonella$ Typhimurium TA98 and TA100 were observed. Based on these results, the ethanol extract of $Arctium$ $lappa$ was shown to display considerable antioxidative activities.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.61-68
• /
• 1999

The variety of crystalline structure and mechanical properties of PP filament treated with dry heat treatment at different draw ratio has been studied. Crystalline structure and mechanical properties of annealed PP filament at different draw ratio has been examined by XRD, UTM, and density method. Heat treatment has been carried out $100^{\circ}C$, $120^{\circ}C$ $140^{\circ}C$ for 30min. in dry oven. From the results of this study, it found the following facts. It was found that the crystallinity and crystallite size of (110) plane of sample were increased with increasing of annealed temperature and draw ratio. The crystalline form of annealed sample which was undrawn showed ${\alpha}$, ${\beta}$ mixing form below $120^{\circ}C$ and showed ${\alpha}$ form at $140^{\circ}C$. But the crystalline form of annealed sample which was drawn showed ${\alpha}$ form at $120^{\circ}C$. Initial modulus and tensile strength were increased with increasing of annealing temperature, and the degree of orientation was decreased with decreasing of annealing temperature.

• Journal of Korea Foresty Energy
• /
• v.2 no.2
• /
• pp.1-12
• /
• 1982

To study tile comparison of aboveground biomass of Pinus rigida Mill. of 18-year-old, plantations located in Whaseong, Yuseong and Wanju district were selected. Ten sample trees in each district selected taking account of DBH distribution were felled carefully to minimize loss of branches and stem analysed by 1m lag segment sectioned from base . The tree height and DBH were measured for sample trees in total growing within $200m^2$ experimental plot. The diagram of oven-dry weight distribution of stem, branch and needle for each 1m segment was constructed. The logarithmic regression equations between dry weight of each component and the two variables, $DBH^2$ and tree height, combined term were presented. The standing crops in the sample stand was estimated to be as much as 23.88, 54.09 and 42.68 tons of dry matter, above ground , per ha in Whaseong, Yuseong anf Wanju district respectively. Annual net production was estimated at 253,657 and 3.65 tons per ha per year respectively. The net assimilation rate was 1.65,1.95 and 1.81 kg/kg/yr in Whaseong, Yuseong and Wanju district respectively. The efficency of leaf to produce stem was 0.99, 1.12 and 1.30 kg/kg/yr respectively.

• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.242-251
• /
• 2023

The electrochemical corrosion behaviors of 304 stainless steels (STSs) with various coatings (organic coating and dry coating) were examined, and their applicability as bipolar plates in polymer electrolyte membrane fuel cells (PEMFCs) was validated. The results showed that the organic-coated samples had a significant decrease in anodic and cathodic current density compared to the uncoated sample. However, an increase in carbon black content in the organic coating or additional heat treatment at 700 ℃ resulted in a decrease in corrosion resistance. In addition, improvements in corrosion resistance achieved by adding TiO₂ powder to the organic coating were found to be limited. In contrast, dry coating with TiC and CrC exhibited higher corrosion potential, significantly lower current density, and reduced contact resistance compared to the organic coatings. Notably, the TiC-coated sample showed a comparatively lower current density and more stable behavior than the CrC-coated sample. Based on a series of experimental results, a thin TiC coating without defects is proposed as a promising surface treatment strategy for STS bipolar plates in PEMFC.