• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.2
• /
• pp.132-138
• /
• 1993

Yield and plant constituent responses of forage sorghum cultivars have usually been compared in uniform defoliation management test. However the influence of harvest time on differential response of cultivars needs more precise definition. Therefore this study with sorghum-sorgo-sudan hybrid cv. NC+Sweet Leaf, and Super Su 22 and Sorghum-Sorghum hybrid cv. Pioneer 931 was carried out under two defoliation regimes, namely defoliation at heading stage of each variety and defoliation on the same calendar date in response to heading stage of early variety. The results are summarized as follows; 1. Three harvests were taken by early variety with 80 days and two harvests by late variety with 94 days from sowing to heading. 2. Dry matter and TDN yield tend to be higher when the plants are cut at ear emergence stage of late variety. 3. Crude protein content was similar for the same growth growth stage of 1st growth and 1st regrowth, and rather big different between varieties. 4. Considering only dry matter and TDN yield, it is recommendable to cut two times at ear emergence stage of late variety and also three times at ear emergence stage of early variety in view point of utilization period extension and distribution of forage products.

• Journal of Animal Science and Technology
• /
• v.60 no.4
• /
• pp.16.1-16.11
• /
• 2018

Background: In their first days of life, dairy calves in artificial rearing systems often have difficulty using an artificial teat for feeding. Methods: We examined the age at which calves are able to stand up voluntarily and suckle as well as their suckling behavior when presented with a plain dry teat versus a dry teat modified with a presumably attractive odor or taste substance. Single-housed newborn dairy calves (n = 51) were presented for ten consecutive days with a two-minute two-choice test, in which suckling time was recorded for 1) a plain (control) teat versus a glucose-coated teat (taste test) and 2) a plain teat versus a teat with a "Freshly Cut Grass" odor (odor test). Results: On average, the calves were able to stand up voluntarily and suckle from the second or third day of age on. The "Freshly Cut Grass" odor had no significant effect on their suckling behavior. In contrast, the calves showed a significant preference for suckling the glucose-coated teat and displayed a significantly longer total suckling time in the taste test compared to the odor test. There were no significant differences between sexes regarding suckling behavior. Conclusion: The results of the present study show that glucose had a significant effect on the calves' teat preference and significantly increased total suckling time with a dry artificial teat. As such, glucose may increase suckling motivation in non-efficient drinkers or ill calves with low motivation to suckle.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.64-74
• /
• 1996

The meachanism for cutting epoxy resins specimens which were specially provided was experimentally investigated to obtain a fine surface finish. the specimens were cut the three-dimensional undrer dry conditions using a lathe. the relationship between the topography of the cut surface due to the change rate of temperature of the cutting condition using sintered carbides (P20, K10, KT150) was investigated. the main results obtained are as follows: 1) The change rate of temperature of the cutting edge is increased in nearly proportion ot cutting speed feed rate depth of cut. 2)The profile of surface roughness were regulated k10 but irregulated P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT 150.4)The cutting resistance increased thrust force rather than cutting force due to the visco-elastic material of epoxy resins.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.2
• /
• pp.111-115
• /
• 1985

This experiment was conducted to investigate the effects of maturity and intake on digestibility of grass hay harvested at different dates. Hay was prepared from first-growth forage which cutting dates were: 4 June (vegetative, called early-cut) 30 June (heading, called late-cut). The grass hay fed to wethers at restricted and ad libitum levels of intake. The results obtained are summarized as follows: 1. As delay in cutting date, contents of crude protein and crude fat decreased, while fibre and lignin increased. 2. On ad libitum feeding of early-cut and late-cut hay, the DM intake were $82g/W_{kg}^{0.75}\;and\;68g/W_{kg}^{0.75}$ respectively. 3. There was no significant difference in dry matter digestibility of early-cut hay between restricted and ad libitum feeding, but dry matter digestibility was decreased markedly in ad libitum feeding when leaves fecal condition out of account. Digestibility of crude protein, organic matter and fibre contained in early-cut hay were tended to decrease slightly in ad libitum when compared with restricted feeding, but were not significantly. 4. Digestibilities decreased significantly with increase of intake in late-cut except for crude protein (P<0.05 or P<0.01). 5. In the comparison of digestibility for all composition, early-cut hay was higher (P<0.01) than late-cut hay.

• Journal of Haehwa Medicine
• /
• v.14 no.1
• /
• pp.15-22
• /
• 2005

Source : sources used by Qianghuo is Ostericum koreanum Maximowicz, Notopterygium incisum Ting and Notopterygium forbesii Boissier etc. in Korea and China. And we cirulate a Qianghuo dividing Nanqianghuo and Beiqianghuo. Thought source of Korea Qianghuo is different from china's we use a same name. And source of Beiqianghuo has not made clear yet. According to research accomplished 2002, we have to use Nanqianghuo producted at Jinbu in aspect of aspect. but, Beiqianghuo the outside form of Beiqianghuo similar to china so we think that we have to more make clear source of domestic Qianghuo, verify a source Beiqianghuo and re-establish about effects and functions of domestic Qianghuos. Culture : A term of culture is an nearly one year. so to product Qianghuo of good quality, we must plant directly in autumn or raise seedlings and transplant in spring. Processing : To protect turning to brown, Qianghuo are cirulate mostly as the original form without washing in water, To proteet crushing of Qianghuo when we cut off, Qianghuo were cut off after being soaked in water or steamed by heat. So when we wash and cut off, it has to be made processes which have no decreases of medical effects and be suggested a proper index which verify a medical effects. In summury, after harvesting Qianghuo the first washing $\rightarrow$ the first dry $\rightarrow$ selection $\rightarrow$ the second washing $\rightarrow$ the second dry $\rightarrow$ selection $\rightarrow$ cutting off $\rightarrow$ the third dry.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.26-32
• /
• 1988

This study was conducted to determine the effects of cutting frequency and cutting height on agronomic characteristics and yield performance of sorghum-sudangrass hybrid, cv. Pioneer 855 F on the experimental field of Livestock Experiment Station, Suweon. The results are summarized as follows: 1. The relative contribution of leaf component to total yield was higher when the plants were cut frequently rather than when defoliated only a few times, and tend to be higher with high cutting. 2. Leaf Area Index (LAI) was the highest at the primary growth of two cutting times scheme and the first regrowth for three or four cutting times a year, but LAI, in general, was not related to cutting height. 3. Crop Growth Rate was the heighest at the first regrowth-plants grown in summer, and it was also related to the amount of stubble left at the previous cut. 4. Dead stubbles were not occurred when plants were cut before heading, but those were accompanied by the frequent and low cutting. 5. Total fresh fodder and dry matter yield were the highest at two times cut a year, and decreased with frequent cutting. The optimum cutting height at two times cut was ca. lOCm height stubble from the ground level, but yield increased with higher level cutting at the three or four times cut a year.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.3
• /
• pp.91-100
• /
• 2010

In this paper a sensitivity analysis about effects of influencing factors on the stability of soil cut and embankment slopes in field was performed. Slope stability analysis of slopes in field was carried out with dry, rainy and seismic conditions. As results of analyzing the sensitivity of factors for the dry and rainy conditions, effect of cohesion, internal friction angle and unit weight of soil on the stability of cut slope is more critical in the dry condition than in the rainy condition. However, their effects on the stability of embankment slope for both conditions are similar to each other. The horizontal seismic coefficient does also affect the stability within the similar range of values irrespective of dry or rainy conditions. Cohesion and internal friction angle are more dominant factors influencing the slope stability irrespective of dry or rainy conditions than unit weight of soil and the horizontal seismic coefficient.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.177-184
• /
• 2018

The frost heave process from repeated freezing and thawing actions in winter on forest road cut-slopes is important for forest road maintenance and management. This study investigated the damages of the forest heave process on forest road cut-slopes by measuring the changes in the road-cut surface elevation and sediment production and by conducting vegetation surveys which were aimed at providing information for forest road maintenance plans. The temperature and humidity differences were determined between the north and south cut-slopes. T-test showed that the north slope had a lower temperature and humidity than that of the south slope. Field observations also confirmed frozen soils on the north slopes, indicating that the north slopes are susceptible to frost heave. Sediment was converted to dry weight per unit area ($g/m^2$). T-test showed that the north slope produced more sediment than that of the south slope. The study confirmed that more frost heave occurred on the north cut-slopes than on the south cut-slopes. Vegetation surveys were conducted on five cut-slope plots. Considering the dominant species found above the cut-slopes, vegetations in all the plots are expected to succeed to pine and oak in the future. The dominant species appearing on the cut-slopes of the study area were exotic species because the elapsed time of the site was only 2 - 4 years.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.4
• /
• pp.271-280
• /
• 1994

The aim of this experiment was to investigate the effects of fertilizing mineral nitrogen on dry matter yield of Reed canarygrass and also to estimate proper levels of fertilizing nitrogen when uncultivated rice paddy rapidly increased these days, was used for the production if Reed canarygrass. \ulcornerhe results are as follows. 1. Relative dry matter according to cutting frequency was appeared the highest at the 2nd cut for 3 and 4 cutting frequencies, and the 3rd cut for 5 cutting frequency. Those were 43.1, 34.0 and 34.1 % respectively. 2. When using only phosphrous and potassium, the average dry matter per year and ha was between 9.0 and 12.0 tons(3, 4 and 5 cutting frequency) and the highest dry matter was shown at 5 cutting frequency. 3. In accordance to the increase in the fertilization of nitorgen, the yield of dry matter was increased and, when 30 kg/ha/cut of mineral nitrogen was added, the biggest increase rate per added nitrogen for dry matter yield per year compared to that of no fe~tilization of nitrogen was recorded and it was 2.7, 3.3, and 3.4 tons/ ha for 3, 4 and 5 cutting frequencies respectively. 4. The efficiencies of mineral nitrogen on dry matter yield(DM kg/N kg) were the highest when 30kg nitrogen was applied particularly in 3, 4 and 5 cutting frequencies(29.7, 27.2, 22.8 DM kg/N kg). It recorded the highest of all the treatments. The efficiency was actually decreased in higher application of mineral nitrogen. The total nitrogen yield efficiency was the highest in 30kg(0.45kg and 0.48kg at 4 and 5 cutting frequency) and 60kg fertilization/ha/cut (0.46kg at 3 cuting frequency) and the decreased efficiencies appeared at fertilization of higher nitrogen. 5. Economical borden of mineral nitrogen fertilization were between 199.2 and 243.3kglha at 3 cutting frequency, between 253.4 and 295.9kg at 4 cutting frequency and between 302.2 and 361.3kg at 5 cutting frequency. 6. Under the condition of this experiment, the cutting frequency leading the potential production at maximum was 3 cutting frequency. At 3 cutting frequency, the efficiency of nitrogen utilization was higher and 15 or 16 tons of dry matter was obtained which is a level of economical border at fertilization between 200 and 240kglha. It wrs possible to obtain the maximal dry matter yield(l7 tonslha) at fertilization of lower level than 400kgl ha.

• The Research Journal of the Costume Culture
• /
• v.19 no.1
• /
• pp.96-103
• /
• 2011

It is well known that the Petasites japonicus has been used for a long time medicine for the treatment of allergic diseases such as lacquer poisoning. However, the exact components and dyeing properties of its effects is still not known. Therefore, the purpose of this study was to investigate the dyeing property and ultraviolet-cut ability of silk and nylon fabrics that was dyed variously with the Petasites japonicus. The Petasites japonicus extract was done by boiling with distilled water at $100^{\circ}C$ for 1 hour. As mordanting agent, we used Aluminum potassium sulfate ($AlK(SO_4)_2{\cdot}12H_2O$), Copper(II) sulfate pentahydrate ($CuSO_5{\cdot}5H_2O$), Iron(II)Chloride ($FeCl_2{\cdot}4H_2O$). The best K/S value of dyeing temperature and time, all the fabrics were $100^{\circ}C$, 90min. Silk fabric was dyed yellow(0.8Y 7.6/2.2) and nylon fabric was dyed reddish yellow(10.1 YR 7.4/3.0). Silk fabric and nylon fabric was changed greenish yellow on mordanting with $CuSO_5{\cdot}5H_2O$ and $FeCl_2{\cdot}4H_2O$ respectively. And the colorfastness of washing and dry-cleaning was improved by using mordanting agent(4~5 grade). Ultraviolet-cut ability(UV-B) was showed more 90% in dyed nylon fabrics.