• Journal of Biosystems Engineering
• /
• 제41권1호
• /
• pp.43-50
• /
• 2016

Purpose: The present study is aimed at examining the drying characteristics of sea tangle through a combination of microwave and far-infrared drying experiment and finding the optimal drying conditions. Methods: Sea tangle was cleaned and cut into fine pieces (5mm) before they were subjected to combinational drying by microwave and far-infrared ray. The amount of specimen per drying is 2 kg. The finely cut pieces of sea tangle were preheated in a microwave dryer for three different lengths of time (10, 15, and 20 min). Subsequently, they were dried using a far-infrared dryer at tow temperatures ($90^{\circ}C$ and $100^{\circ}C$) at an air velocity of 0.8 m/s until the final moisture content reduced to 10%. Results: Sea tangle dried under the condition of 20 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. Of the drying models verified in this study, the logarithmic model showed high accuracy with the coefficient of determination $R^2>0.7825$ and RMSE<0.1095. The rehydration ratio of sea tangle was the highest (12.87 g water/g dry matter) under the condition of 15 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. The energy consumption for the combination of microwave and far-infrared drying was the lowest (4.78 kJ/kg water) under the condition of 20 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. Conclusions: Considering the drying time, discoloration during drying, rehydration ratio, and energy consumption for the drying of sea tangle, the optimal drying conditions for high-quality sea tangle are 15 min of preheating in a microwave dryer and drying at $100^{\circ}C$ by a far-infrared dryer.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권4호
• /
• pp.514-522
• /
• 2017

Objective: The study aimed to assess the N use efficiency (NUE) of pig slurry (in comparison with chemical fertilizer) for each regrowth yield and annual herbage production and their nutritive value. Methods: Consecutive field experiments were separately performed using a single application with a full dose of N (200 kg N/ha) in 2014 and by four split applications in 2015 in different sites. The experiment consisted of three treatments: i) control plots that received no additional N, ii) chemical fertilizer-N as urea, and iii) pig-slurry-N with five replicates. Results: The effect of N fertilization on herbage yield, N recovery in herbage, residual inorganic N in soil, and crude protein were significantly positive. When comparing the NUE between the two N sources (urea and pig slurry), pig slurry was significantly less effective for the earlier two regrowth periods, as shown by lower regrowth dry matter (DM) yield, N amount recovered in herbage, and inorganic N availability in soil at the 1st and 2nd cut compared to those of urea-applied plots. However, the effect of split application of the two N sources was significantly positive at the last two regrowth periods (at the 3rd and 4th cut). The two N sources and/or split application had little or no influence on neutral detergent fiber (NDF) content, acid detergent fiber (ADF) content, and in vitro DM digestibility, whereas cutting date was a large source of variation for these variables, resulting in a significant increase in in vitro DM digestibility for the last two regrowth periods when an increase in NDF and ADF content occurred. Split application of N reduced the N loss via nitrate leaching by 36% on average for the two N sources compared to a single application. Conclusion: The pig slurry-N was utilized as efficiently as urea-N for annual herbage yield, with a significant increase in NUE especially for the latter regrowth periods.

• 지질공학
• /
• 제16권2호
• /
• pp.189-199
• /
• 2006

본 논문은 도로공사시 발생된 붕괴사면을 대상으로 사면안정성을 검토하고, 불안정할 경우 합리적인 사면보강공법을 제안한 현장사례 연구이다. 사면조사결과 대상사면은 5개의 대규모 인장균열을 포함하고 있으며, 사면활동은 인장균열에서 시작하여 표토층과 풍화암층사이까지 발생된 것으로 판단된다. 사면안정해석은 건기시와 우기시에 대하여 각각 수행되었으며, 대상사면은 현재 불안정한 것으로 예측되었다. 사면보강공법은 사면의 파괴규모에 따라 선정하는 것이 바람직하다. 즉, 파괴규모에 따라 소규모파괴, 중규모파괴, 그리고 대규모파괴로 나누고 각각의 파괴규모에 따라 사면보강공법을 결정할 수 있다. 대상사면의 경우 대규모파괴에 해당하므로 사면보강공법은 안전율증가공으로 억지말뚝공을 채택하고, 안전을 유지공으로 식생공(Seed Spray) 및 지표수배제공을 채택할 수 있다. 억지말뚝으로 보강된 사면의 안정해석을 위하여 SLOPILE(Ver 3.0)프로그램을 적용하였다. 사면안정 해석결과 1열의 억지말뚝을 시공할 경우 안정한 것으로 나타났으며, 해석결과로부터 억지말뚝의 사면안정효과를 확인할 수 있다.

• 농업생명과학연구
• /
• 제44권5호
• /
• pp.9-13
• /
• 2010

본 연구는 절화용 국화의 양액재배를 위한 코코넛 배지의 이용 가능성을 검토하기 위해 수행되었다. 본 연구에서 코코넛 배지는 중과피에서 유래된 dust와 fiber 그리고 가공된 chip을 이용하여 조성하였다. 시험구의 처리는 코코넛 단용배지 (dust 100%), dust와 fiber 그리고 dust와 chip을 각각 70:30의 부피비로 혼합한 혼용배지, 그리고 비교를 위해 펄라이트를 대조구로 하였다. 배지별 함수율은 펄라이트배지에서 75.8%로 가장 낮았고 코코넛 더스트 단용배지에서 93.1%로 가장 높게 나타났다. 배액의 pH는 코코넛 단용 및 혼용배지에서 5.8 ~ 6.5사이였으나 펄라이트배지에서 6.7 ~ 7.3의 범위로 높게 나타났다. 배액의 EC는 코코넛 단용배지에서 가장 높고 펄라이트배지에서 가장 낮은 것으로 나타났다. 국화의 초장, 엽면적, 그리고 건물량은 펄라이트배지와 코코넛 단용배지와 비교하여 코코넛 혼용배지에서 우수한 것으로 나타났다. 배지처리별 개화소요일수는 차이가 없었다.

• 한국화예디자인학연구
• /
• 제42호
• /
• pp.145-156
• /
• 2020

본 연구는 플라워샵에서 판매되는 상품들의 품목별 판매량이 많은 화훼상품과 성수기 현황을 조사하고자 하였다. 국가기술자격 화훼장식기능사 및 기사 자격을 취득한 (사)화훼장식 기사협회 회원이며 꽃집을 운영하는 자 103명을 대상으로 설문 조사를 하였다. 연구 결과 화훼상품 판매 성수기는 5월(52.0%)과 2월(24.3%)이 1, 2위로 나타났고 선정이유는 5월은 가정의 달, 스승의 날 등 2월은 인사이동, 졸업식 등이었다. 분류별 판매량이 많은 화훼상품을 조사한 결과 절화는 연간, 성수기 모두 꽃다발(51.5%%, 40.3%)과 꽃바구니(28.8%, 37.5%)가 1, 2위로 나타났고, 연간 판매량 조사에서는 6위였던(1.8%) 코사지가 성수기에는 3위(8.0%)로 판매량이 증가하였다. 분화는 연간, 성수기 모두 관엽식물(50.6%, 51.3%)과 서양란·동양란(27.4%, 28.3%)이 1, 2위로 나타났고, 연간 판매량 조사에서는 응답이 없었던 숯부작과 분재가 성수기에 각 0.7%와 2.6%로 판매량이 증가하였다. 가공화는 연간, 성수기 모두 동일하게 건조화(45.3%, 39.5%), 프리저브드 플라워(27.7%, 37.2%)가 1, 2위로 나타났고, 뒤이어, 인조화, 압화, 콜라주 순이었다.

• 전기화학회지
• /
• 제3권2호
• /
• pp.115-120
• /
• 2000

양극 물질로 산화바나듐 박막, 고체전해질로는 LiPON 박막 그리고 음극 물질로는 리튬 금속 박막을 선택하여 $Li/LiPON/V_2O_5/Pt$ 구조의 전고상 박막 전지를 제작하였고 전지 특성을 평가하였다. 산화바나듐 박막은 여러 산소 분압에서 직류 반응성 스퍼터링으로 증착하여 전기화학적 특성을 분석한 결과 $20\%\;O_2/Ar$비에서 가장 우수한 가역 특성을 나타내었다. 직류 반응성 스퍼터링에 의해 산화바나듐 박막을 제작한 후 진공을 그대로 유지한 상태에서 r.f. 반응성 스퍼터링에 의해 LiPON 고체전해질 박막을 증착하였다. 그 후 dry room내에서 진공 열증착법에 의해 리튬 금속 박막을 증착하여 전고상의 박막 전지를 제작하였다. $Li/LiPON/V_2O_5$ 박막 전지를 전압 범위와 전류 밀도를 변화시켜 충방전 시험을 행한 결과 $7{\mu}A/cm^2$의 전류 밀도와 3.6-2.7 V의 전압범위에서 가장 우수한 가역 특성을 나타내었다. $Li/LiPON/V_2O_5$박막 전지로 초시계를 구동 시켰으며 이는 in-situ공정에 의해 제작된 박막 전지가 소자 에너지원으로의 응용 가능성을 보여 주었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권5호
• /
• pp.580-586
• /
• 2000

Data collected between 1981 and 1991 at the Philippine Carabao Center at Central Luzon State University (PCC-CLSU) were used for the comparison of growth, milk yield and draughtability of Murrah-Philippine crossbred and Philippine native buffaloes. Body weights and body measurements were available at 3-month intervals from birth to 36 months of age for a total of 34 $Murrah{\times}Philippine$ native buffalo F1 crossbreds (CBB; 21 cows, 13 bulls) and 32 Philippine native buffaloes (PNB; 16 cows, 16 bulls). Lactation records were available for 14 CBB and 19 PNB cows. Data for draughtability under wet and dry ploughing conditions were available for 4 CBB and 4 PNB steers. The results indicate that crossbreds grow faster (0-9 months of age: cows $442{\pm}19$ vs. $301{\pm}21g/day$, bulls $305{\pm}23$ vs. $296{\pm}21g/day$; 9-36 months of age: cows $227{\pm}10$ vs. $147{\pm}12g/day$, bulls $282{\pm}13$ vs. $138{\pm}12g/day$), mature earlier and produce more milk (1st lactation: $1139{\pm}153$ vs. $450{\pm}112kg$; 2nd lactation: $1115{\pm}132$ vs. $488{\pm}136kg$) than native buffaloes, but have a poorer draughtability (wet ploughing; force as % of body weight $8.8{\pm}0.2$ vs. $12.2{\pm}0.6$; dry ploughing: cut depth $10.98{\pm}0.25$ vs. $11.92{\pm}0.13cm$, velocity $0.50{\pm}0.03$ vs. $0.60{\pm}0.02m/sec$, force as % of body weight $9.0{\pm}0.6$ vs. $11.3{\pm}0.7$). The correlation coefficients between body weight and body measurements at birth and at 3-month intervals indicate that heart girth has a relatively high correlation with body weight, especially in crossbreds. It is concluded that in Philippine smallholder farming systems in which meat and milk production are secondary to draught power, the native buffalo is preferable from the point of view of input needed to maintain the number of animals kept for a required draught force.

• 한국잠사곤충학회지
• /
• 제2권
• /
• pp.73-81
• /
• 1962

This treatise is to analyze the chemical components in the mulberry varieties which are cultured in Korea and to estimate the nutritive values for them. Some of these varieties were developed lately in this country just by the general breeding aspect of mulberry leaf producing and silkworm raising experimentation without analysing the nutritive values of them which may be differed by various culturing condition. This work will be helpful for the improvement of mulberry varieties and the correct judgement of them. The varieties used for the analysis are as followings; A. Morus bombycis Koridz species. 1.Ichi-Hei. 2. Shimano-Uchi B. Morus alba L. species. 3. Kairyo-Nezumigaeshi. 4. Suwon-Daeyop. 5. Suwon No. 3. 6. Suwon No. 4. 7. Yongchon-Chuwoo. C. Morus Ihou (Ser.) Koidz species. 8. Ro-Soh. The specimens were eventually taken under the air and soil dry season because of the rain shortage during the sampling period and the results are found as a rather different from the normal specimen under the normal climate. Therefore, this treatise will be an important report on a special culturing condition and the nutritive values by the mulberry varieties, and still comparable because they were grown under the same condition. The individual conclusions are; 1. Yongchon-Chuwoo which was originated in this country, was found as an important variety for this country from the aspect of mulberry nutritive value and leaf producing amount, and it is believed that this is the best suitable variety for the soil of Korea. 2. Ichi-Hei occupies the better situation as well as Yongchon-Chuwoo from the nutritive criticizing even though it was originated in Japan. 3. The lately developed Suwon No.3 and No.4 are best from the leaf producing point of view, but they are not found such a good varieties from the nutritive aspect. The result may be happened as poor because they were cut before spring sprout started. 4. Ro-Soh which was normally recognized as a poor variety, was also found as a poor nutritive and leaf producing variety. 5. The crude protein and crude fat components in the mulberry leaves decreased as the leaf maturity was progressed, but the crude fiber and crude ash components increased reversively in general view. It was also found that there were some specific changing nature by the mulberry varieties and could not rule them by just one conclusion. 6. During the air and soil dry season, the ash component increases but the hydrocarbon and moisture contents decrease considerably, and which resulted to the increase of mulberry hardness ratio and the decrease of sugar-protein ratio, eventually it causes the decrease of the nutritive value. It was also found that Ichi-Hei, Ro-Soh, and Suwon No. 3 had a strong recovering nature to their normal nutritive condition after raining. 7. Mulberry is of course a rich calorie diet, and is calculated as 50 to 60 Cal. per gram.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.39-45
• /
• 1995

The plywoods commonly used as decorative interior materials for the construction are inflammable and so it is a causative factor for making fire accidents, resulting in the destruction of human life and personal properties. Indeed, it is, therefore, required to produce fire-retardant plywoods. In this study, a special grade of defect-free, Kapur plywood was used. Specimens were cut into 3- by 20cm dimensions from 120- by 240- by 0.33-cm panels(thin panel) or 120- by 240- by 0.5-cm panels(thick panel). Some specimens were treated with diammonium phosphate(DAP), but some were not treated with diammonium phosphate to use as control panels. Chemical absorption, drying curves, drying rates and dynamic Young's modulus were investigated. The results were summaries as follows; 1. The specimens were soaked into 19% diammonium phosphate solution by a full cell pressure process and the diammonium phosphate retained in the thin and thick plywoods was 1.409kg/$(30cm)^3$, 1.487kg/$(30cm)^3$, respectively. 2. Diammonium phosphate-treated plywoods were redried with press-drying process at one of either condition dried on the platen($115^{\circ}C$) for a period of time or dried on the platen($50^{\circ}C$) for 3 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. or dried on the platen($60^{\circ}C$) for 2 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. The drying rate of treated thin specimens dried at $60^{\circ}C$ plus $30^{\circ}C$ and $115^{\circ}C$ only was found to be 0.04 %/min. and 8.53 %/min. Similarly, the drying rate of treated thick specimens were 0.03 %/min. and 6.77 %/min. respectively. 3. It was evident that highly-significantly different drying rate of treated plywoods was observed between plywood thicknesses and platen temperatures and the rate was increased by elevating the platen temperature up to $115^{\circ}C$. Based on the two-way variance analysis, highly significant drying rate was observed from the interaction between plywood thicknesses and platen temperatures. 4. After redrying, the specimens were weighed and reconditioned to a constant weight in a facility maintained temperature ($20^{\circ}C$) and relative humidity(65%) prior to test dynamic Young's modulus. The test revealed that the thin specimens dried at the platen temperature of $50^{\circ}C$, $60^{\circ}C$, $115^{\circ}C$ and untreated specimens showed 1.070E+09 dyne/$cm^2$, 1.156E+09 dyne/$cm^2$, 1.243E+09 dyne/$cm^2$, and 1.052E+09 dyne/$cm^2$, respectively. Likewise, the thick specimens revealed 5.647E+09 dyne/$cm^2$ 5.670E+09 dyne/$cm^2$, 6.395E+09 dyne/$cm^2$ and 5.415E+09 dyne/$cm^2$, respectively. 5. It was evident that significantly different dynamic Young's modulus was observed between the plywood thickness and the platen temperature, but not in the two-way interaction between the plywood thickness${\times}$the platen temperature.

• 한국토양비료학회지
• /
• 제48권3호
• /
• pp.225-232
• /
• 2015

We evaluated the effect of mixed liquid fertilizer (MLF) on growth responses of plants and soil chemical properties. A pot experiment with red pepper (Capsicum annuum L.) using loam soil was conducted for 81 days in a temperature-controlled glasshouse, and four N fertilization treatments were laid out in a completely randomized design with three replicates: control (C), chemical fertilizer treatment (CF), and two rates (MLF-0.5 and MLF-1.0) of MLF treatment. Soils were periodically sampled and analyzed for pH, EC(Electrical Conductivity), total N, inorganic N and total C, and some growth characteristics of red peppers were measured. During the experimental periods, the pH of MLF soils was higher than that of CF soils. Soil EC increased right after application of CF or MLF, and the intial increase persisted in CF and MLF soils at the end of experiment. Soil total-N increased right after application of CF or MLF, and this initial increase persisted only in MLF-1.0 soils. Soil inorganic N content initially increased in CF or MLF-1.0 soils, but the initial increase disappeared in 56 days after transplanting. Soil total-C was maintained higher in MLF-1.0 soils and lower in CF soils than in control soils, and the intial increase in MLF-1.0 soils finally disappeared to the level of control soils. Plant height, dry weight of plant organs (shoots, roots and fruit), and the number, diameter and length of red pepper fruits were greatest in CF plants. On the other hand, the effect of MLF-application was different depending on the rate of application. However, no consistent effect of N treatments on some major elements of the organs of red peppers was observed. The amounts of N taken up by plants were 1.3 g for CF, 0.8 g for MLF-1.0, 0.5 g for MLF-0.5 and 0.4 g for control treatments. The results of this study showed that mixed liquid fertilizer (MLF) could appropriately serve as an alternative to chemical N fertilizer in red pepper cultivation.