• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2001.11a
• /
• pp.8-13
• /
• 2001

In recently, polishing tile(porcelain homogeneous polished tile) was used in the construction field as a finishing material. But, there happened some problems such as tile exfoliation by construction condition in early ages. Also, in the dry wall system which used to lightweight wall, for use of polishing tile on dry wall, the examination of adhesive stability of polishing tile is needed. In this Paper, adhesive strength of Polishing tile was investigated by tile bond types on gypsum board and non asbestos board coated by tar-urethane and polymer modified cementitious waterproofing membrane(Series I). Then, the effect of heat stress and vibration was estimated on gypsum and non asbestos board(Series II).

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.169-173
• /
• 2003

We demonstrated the applicability of dry film photoresist (DFR) in photolithography process for fine pitch solder bumping on the polytetrafluoroethylene (PTFE/Teflon) printed circuit board (PCB). The copper lines were formed with $100\;{\mu}m$ width and $18\;{\mu}m$ thickness on the PTFE test board, and varying the gaps between two copper lines in a range of $100-200\;{\mu}m$. The DFRs of $15\;{\mu}m$ thickness were laminated by hot roll laminator, by varying laminating temperature from $100^{\circ}C\;to\;150^{\circ}C$ and laminating speed. We found the optimum process of DFR lamination on PTFE PCB and accomplished the formation of indium solder bumps. The optimum lamination condition was temperature of $150^{\circ}C$ and speed of about 0.63 cm/s. And the smallest size of indium solder bump was diameter of $50\;{\mu}m$ with pitch of $100\;{\mu}m$.

• Journal of Korean Medical classics
• /
• v.21 no.2
• /
• pp.145-150
• /
• 2008

In this study, we investigated how prescriptions from "Sanghallon(傷寒論)", such as Oryeongsan(五笭散), Banhasasimtang(半夏瀉心湯), Dohaekseunggitang(桃核承氣湯), Jukyeopseokgotang(竹葉石膏湯), were applicated in Onbyeongjobyeon(溫病條辦). When applying prescriptions from "Sanghallon" onto Onbyeong(溫病), Odang had replaced warm, dry herbs with cool herbs which generate body fluid, considering general characteristics of onbyeong that may easily dry up and injure body fluid. In the case of Seuponbyeong(濕溫病), however, warm, dry herbs were also used, as well. Odang did not persist in the general characteristic of onbyeong, but composed prescriptions only based on pathological condition. From this, one can point out his precise thinking of Byeonjeung(辯證), and pragmatic nature of his study.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.3
• /
• pp.508-519
• /
• 2008

Hot air drying is a method that let moistures evaporate by heat exchange between heating air and dry target. This way is dominating more than about 70% of dryers that the use extent is wide fairly, and is established in domestic than dryer that use conduction or radiation etc. Most of research about drying had been emphasized in size of device through analysis for these dry phenomenon plain, heating topology, and aspect of form and so on by dry target's special quality, and research about device development or waste heat withdrawal technology in energy utilization efficiency side is slight real condition. Therefore, in this study, Investigated numerically about thermal efficiency elevation that is leaned against as that change the temperature of inlet and outlet in heat exchanger of the hot air drying tower.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.253-255
• /
• 2008

This paper gives a basic data of the surface discharge characteristics for epoxy resin in Dry-Air. Used electrodes are needle to plane, sphere to plane and KS M3015 electrodes. With the changing electrodes in same condition, we can obtain different creeping lengthes, breakdown voltages and dielectric strengths, respectively. Dielectric strengths of Needle to plane electrodes are more higher than the others. Breakdown voltage and dielectric strength increase as the thickness of epoxy resin and creeping strength increase.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.41-46
• /
• 1996

In this study, unsintered and pre-sintered low purity alumina ceramics were machined with various tools to clarify the machinability, optimum tool materials and optimum cutting conditions. The main conclusions obtained were as follows. (1)In the case of dry cutting, the sintered diamond and natural diamond tools exhibit better performance in machining of the ceramic pre-sintered at lower temperature, and the tool lives of both tools in machining the ceramics pre-sintered at high temperature becomes extremely short. (2)The performance of CBN tool becomes better in dry machining of the ceramics pre-sintered at higher temperature. (3)When the pre-sintered ceramics were wet machined with sintered diamond, the tool life becomes considerably long, and higher cutting speed can be used than in the case of the CBN and ceramic tools, the tool lives becomes shorter at wet cutting than at dry cutting, especially exhibiting extremely short tool life in wet cutting with ceramic tool.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.3
• /
• pp.47-54
• /
• 2012

As a large construction such as highway, dam, reclaimed land etc. increase in number more and more, large amount of fill materials are required. It is needed to utilize a gypsum which is a by-product yielded from chemical plants, as fill materials. Though some studies have been conducted to know a engineering characteristic of gypsum, it is not certain that water contents were checked at $45^{\circ}C$ dry oven. This study proposed that water contents must be measured at $45^{\circ}C$ dry condition because gypsum is changed to other types as a dry temperature. As the results obtained by compaction tests, it is found that moisture of gypsum in compaction must be within -5.0~2.5 % O.M.C (optimal moisture content).

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.194-195
• /
• 2007

$SF_6$ gas used widely as insulating component in electric power industry has excellent in insulation and arc extinguishing performance in gas-insulated switchgear. However, the concern about eco-friendly alternative gas is currently rising because $SF_6$ gas is one of the main greenhouse gases. In this paper, dry-air and composite-insulation (dry-air+epoxy) as the alternative technology for $SF_6$ gas insulation is studied. Under the gas pressure ranged from 0.1 to 0.6MPa, the breakdown voltage of dry-air were measured in AC electric field. The data of composite-insulation were acquired by changing the thickness of epoxy used in each composite-insulation under the same condition.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.4
• /
• pp.353-360
• /
• 2000

The purpose of this research is to find the fundamental data for the design and optimum operation condition for the disk atomization comparing the atomization characteristics of the modified straight vane type disk atomizer and the cup type atomizer widely used in the field of spray dry. First, the experimental comparison of the characteristics of $Na_2SO_4$ atomization has been carried out using the cup type disk atomizer and the three kinds of vane type atomization designed specially for the experiment. After the comparison of the experimental data of the $Na_2SO_4$ and raw milk have been conducted using vane type atomizer.

• Journal of Sasang Constitutional Medicine
• /
• v.20 no.3
• /
• pp.190-198
• /
• 2008

1. Objectives The purpose of this case study is to evaluate the effects of Sasangconstitutional diagnosis and treatment of chronic idiopathic urticaria patient who was diagnosed Taeeumin Dry-Heat Syndrome(煥熱證). 2. Methods Chronic idiopathic urticaria patient was diagnosed Taeeumin Dry-Heat Syndrome(煥熱證) based on their Nature & Emotion(性情), physical characteristics, symptoms. She was medicated Cheongsimyeonjatang(淸心蓮子湯). 3. Results and Conclusions Chronic idiopathic urticaria patient who was treated with Cheongsimyeonjatang(淸心蓮子湯) showed improvement in urticaria symptom and general condition. This case study describe the effectiveness on Chronic idiopathic urticaria symptom by using Cheongsimyeonjang(淸心蓮子湯).