• 한국대기환경학회지
• /
• 제33권5호
• /
• pp.521-528
• /
• 2017

In the combustion treatment of explosive gases with a high heating value such as $H_2$ and $NH_3$ used in semiconductor and chemical processes, the heat recovery modeling and exergy analysis of the process using the Aspen Plus simulator and its thermodynamic data were performed to examine the recovery of high temperature thermal energy. The heat recovery process was analyzed through this process modeling while the exergy results clearly confirmed that the rigorous reaction mainly occurs in the condenser and the chamber. In addition, the process modeling demonstrated that approximately 95% of the exergy is destructed on the basis of the exergies injected and the exergy being exhausted. Using the exergy technique, which can quantitatively analyze the energy, we could understand the energy flow in the process and confirm that our heat recovery process was efficiently designed.

• 한국연소학회지
• /
• 제9권1호
• /
• pp.11-17
• /
• 2004

The purposes of this study are to analyze nitrogen oxides(NOx) formation mechanism and to reduce abnormal NOx emissions in gas turbines. Industrial gas turbines emissions have potential to negative affect to the atmosphere in many different ways such as photochemical smog, acid rain and global warming. In conventional gas turbine combustors, one of the main pollutants such as nitrogen oxide(NOx) species, are principally formed from combustion process of fuel with oxygen in the primary combustion zone, and their emission levels are highly depend on peak temperatures in the combustor. In order to examine the characteristics and the effect of NOx formation, we used gas turbine of which commercial operating in Korea. From the examination, it has been found that NOx emissions are relatively high at low load(output) and during combustion mode change. Also, the effect of Air/Fuel ratio was considered. As the Air/Fuel ratio was increased in Lean-Lean mode, the NOx emission was decreased. The results of this study indicated that NOx emission levels are highly depend on peak temperature and pressure of combustion process in the combustor.

• 한국연소학회지
• /
• 제13권4호
• /
• pp.47-53
• /
• 2008

The reaction mechanism of methane dry reforming has been investigated using an arc-jet reactor. The effects of input power, $CO_2/CH_4$ and added $O_2$ were investigated by product analysis, including CO, $H_2$, $C_{2}H_{Y}$ and $C_{3}H_{Y}$ as well as $CH_4$ and $CO_2$. In the process, input electrical power activated the reactions between $CH_4$ and $CO_2$ significantly. The increased feed ratio of the $CO_2$ to $CH_4$ in the dry reforming does not affect to the $CH_4$ conversion. but we could observe increase in CO selectivity together with decreasing $H_2$ generation. Added oxygen can also increase not only CO selectivity but also $CH_4$ conversion. However, hydrogen selectivity was decreased significantly due to a increased $H_{2}O$ formation.

• 한국세라믹학회지
• /
• 제55권1호
• /
• pp.44-49
• /
• 2018

The use of fossil fuels is steadily increasing. The thermal power generation industry uses a lot of energy and emits a large amount of greenhouse gases. On the other hand, a desulfurization facility can be installed to remove sulfur content during boiler combustion process of the power plant. Dry desulfurized gypsum generated from dry desulfurization facilities is suitable as a $CO_2$ absorbing material due to the presence of CaO. In this study, the carbonation properties of dry desulfurized gypsum were investigated by carbonizing dry desulfurized gypsum via mixing with water and stirring. As a result of microstructural, XRD and thermal analyses of the carbonized dry desulfurized gypsum, the carbonation age was found to be suitable for 16 h. Dry desulfurized gypsum absorbs about 16% of $CO_2$ per unit weight.

• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.253-258
• /
• 2019

연소 후 이산화탄소 포집용 고속 유동층 공정에서 사용되는 흡수제를 대량생산할 때, 흡수제 강도를 위해 여러 가지 물질을 사용한다. 본 연구에서는 흡수제 설계시 사용하는 물질 중 하나인 Micro-cell C (MCC)를 사용하여 $K_2CO_3$ 기반 건식 흡수제(KMC)를 제조하였고, 흡수 및 재생 특성을 평가하였다. 흡수반응은 $60^{\circ}C$에서 실험하였고, 재생반응은 $200^{\circ}C$에서 실험하였다. KMC 흡수제의 연속실험 결과, 1 cycle임에도 불구하고 이론흡수능(95.4 mg $CO_2/g$ sorbent)의 약 22%인 21.6 mg $CO_2/g$ sorbent의 낮은 흡수능을 나타내었고, 5 cycle에서는 13.7 mg $CO_2/g$ sorbent의 낮은 흡수능을 나타내었다. XRD 및 TG 분석결과, MCC에 함유된 Ca계 성분으로 인해 제조 및 흡수 과정에서 부반응 물질인 $K_2Ca(CO_3)_2$ 구조가 생성됨에 따라 흡수제가 비활성화된 것을 확인하였다. 또한 흡수제 비활성화 문제를 해결하기 위해, MCC를 $850^{\circ}C$에서 먼저 소성하는 과정을 추가하여 흡수제(KM8)를 제조하였다. KM8 흡수제는 1 cycle에서 95.2 mg $CO_2/g$ sorbent의 높은 흡수능을 나타낼 뿐만 아니라 5 cycle 동안 우수한 재생성을 나타내었다. 따라서 소성단계를 추가함으로써 부반응 원인물질 제거방법을 통해 흡수제의 비활성화를 해결할 수 있음을 확인하였다.

• 한국입자에어로졸학회지
• /
• 제9권4호
• /
• pp.239-246
• /
• 2013

The purpose of this study is to determine the feasibility of dry-type desulfurization process for actual application to coal-fired power plant. We used actual exhaust gas from Facility Y, Plant #2 to fabricate a demo-scale testing device to attempt to improve the efficiency of desulfurization. A spout-bed circulating dry scrubber convergence system connecting turbo reactor with bag filter was devised, then analyzed for performance characteristics of $SO_2$ removal for Ca/S mole ratio, superficial gas velocity, and ammonia injection, and for secondary reaction characteristics of the non-reactive sorbent at the bag filter. As a result, the installation of spout-bed circulating dry scrubber convergence system showed better economy and efficiency for removing sulfur than the existing wet/semidry-type desulfurization process. In addition, the best efficiency for desulfurization occurred when connected to the bag filter, with differential pressure maintained at 150 $mmH_2O$.

• Fisheries and Aquatic Sciences
• /
• 제10권2호
• /
• pp.93-101
• /
• 2007

Concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were determined in marine sediments from Mokpo coastal water of Korea. Total and toxic equivalent (TEQ) concentrations of PCDD/Fs ranged from 19.4 to 175pg/g dry weight and ranged from 0.195 to 2.87 pg WHO-TEQ/g dry weight, respectively. These PCDD/F concentrations were below the safety sediment value (20 pg TEQ/g dry weight) of chronic toxicity. A highly significant correlation between the concentrations of PCDD/Fs and total organic carbon (TOC) in marine sediments was observed. Overall PCDD/F concentrations in the sediments were elevated in rivers and at inner locations close to harbors, indicating that these contaminants derived from local discharges of human activities. PCDD/F concentrations measured in our study were lower than those in several industrialized areas in Korea. Nonparametric multidimensional scaling (MDS) ordination showed that combustion processes from industrial complexes are the major source of PCDD/Fs in Mokpo coastal water.

• Nuclear Engineering and Technology
• /
• 제33권4호
• /
• pp.355-364
• /
• 2001

In order to evaluate and finally optimize the vitrification condition for combustible dry active waste (DAW), dust and gas generation characteristics were investigated for PE, cellulose, and mixed waste Tests were conducted by varying the operation variables such as melter configuration, excess oxygen amount, and waste feeding rate. Results showed that dust generation characteristics were affected by the operation parameters and the melter＇s configuration is the dominant one. For all tested DAWs, dust generation was reduced by increasing the waste feeding rate and the excessive oxygen amount in the melter. Among waste types, dust amount was decreased by the order of mixed wastes, PE, and cellulose. Other parameters such as temperature variation and operation time have also affected the dust generation. The optimum condition for the DAW vitrification was determined as the melter＇s configuration equipped for minimizing the waste dispersion with 20 kg/h of waste feeding rate and 100% of excessive oxygen supply. CO gas concentration in the off-gas was immediately influenced by the combustion state in the melter, but showed similar trend as the dust generation. For the NOx production during the vitrification process, thermal NOx, which is generated from the Post Combustion Chamber (PCC), rather than fuel NOx was assumed to be dominant. The gas cleaning of efficiencies of the PCC, wet scrubber, and Selective Catalytic Reduction system (SCR) were found to be high enough to keep the concentration of pollutants (CO, NOx, SOx, HCI) in the stack below their relevant emission limits.

• 한국분무공학회지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2009

This study carried out numerical analysis of flow field of combustion gas and sorbent to test sorbent efficiency of DSI process. To provide rapid mixing for increase utilization rate of sorbent, streamwise vorticity can be introduced into the flowing streams by other means; for example, by installing vortex generators immediately downstream of the wavy trailing edge. Computing results show that the degree of sorbent dispersion depends strongly on duct structure. Highest dispersion efficiency received when vortex generator was installed inside of duct. The results presented in this study a optimum condition for the development of practical DSI process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.711-714
• /
• 2001

A new technology to make fluoride gas such as NF$_3$contained in the exhaust gas from semiconductor manufacturing plants convert directly into a harmless substance have been established and new concept on the disposal treatment of global warming gases were presented. Experimental results verify that the chemical reactions can be take place at substantially lower temperature of 80-40$0^{\circ}C$ as compared with the combustion treatment method. Reaction product is mainly metal fluoride which is a harmless and a valuable chemical material as one of new resources. The other favorable characteristics are that the continuous treatment is possible at a low temperature under atmospheric pressure. Furthermore this process is compact, easily controllable and safely operable at low running cost. This paper concerns with a new harmless disposal treatment of toxic global warming gas.