• 한국토양비료학회지
• /
• 제32권4호
• /
• pp.412-420
• /
• 1999

하수오니 처리 석회질 토양에서의 Cd, Cu 및 Zn의 수송 특성을 조사하기 위하여 하수오니 무처리 토양, 하수오니 50과 100 ton $ha^{-1}$ 처리 토양 및 하수 오니를 대상으로 용출현상 (elution development)과 혼성치환 (miscible displacement) 기술을 이용하여 실험을 수행하였다. 하수오니 50과 100 ton $ha^{-1}$처리 토양의 Cd, Cu 및 Zn 의 용출곡선 (elution curve)과 출현곡선 (breakthrough curve)은 하수오니 무처리 토양의 Cd, Cu 및 Zn의 용출곡선 및 출현곡선과 거의 비슷하였다. Cd, Cu, 및 Zn 10 mg을 처리한 Cd, Cu 및 Zn의 용출곡선은 Cd, Cu 및 Zn을 처리하지 않았을 때의 용출곡선과는 거의 비슷하였으나, Cd, Cu 및 Zn의 50 mg을 처리한 용출곡선과는 크게 달랐다. Cd, Cu 및 Zn 혼합용액 500과 $1000mg\;L^{-1}$을 이용한 Cd, Cu 및 Zn의 출현곡선은 서로 비슷하였으나, Cd, Cu 및 Zn 혼합용액 $100mg\;L^{-1}$을 이용한 출현곡선과는 크게 달랐다. 실험에 사용한 석회질 토양에서 하수오니 50과 100 ton $ha^{-1}$ 처리량은 Cd, Cu 및 Zn의 수송특성에 큰 영향을 주지 못하였으며, Cd와 Zn의 수송특성은 서로 비슷하였으나 Cu의 수송특성은 Cd 과 Zn의 수송 특성과는 크게 달랐다.

• 공업화학
• /
• 제18권6호
• /
• pp.575-579
• /
• 2007

하수슬러지의 처리문제가 대두되어지면서 많은 연구자들에 의해 슬러지 처리 기술이 연구되어지고 있다. 대표적으로 소각, 탄화, 열분해, 매립, 비료화 등의 방법이 있지만 이러한 모든 공정에는 80% 이상의 높은 함수율의 하수슬러지를 원재료로 사용하기에 어려움이 있어 건조공정이 요구되어진다. 본 연구는 선행 연구인 수치해석적 연구로 설계된 로타리 킬른형 건조로를 이용하여 운전변수로 킬른 체류시간, 건조로 부하, 건조로 온도를 각각 변화시켜 최적의 운전조건과 기술을 확립하는데 그 목적을 두고 있다. 변수별 연구에 의한 결과로 킬른 체류시간, 건조로 부하, 건조로 온도는 각각 $62.5kg/m^3{\cdot}hr$, 26.2 min, $330^{\circ}C$로 결정되었다. 이때 함수율 $10{\pm}2%$, 건조효율 88%, 무게감량 80%, 부피감량 60% 정도로 나타났고, 슬러지의 입경은 10 mm 이하로 배출되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.17-26
• /
• 1996

This research was accomplished to evaluate possibility of using paper sludge for the raw materials of wood based panel products. The experimental panels were manufactured by four mixed ratios, the proportion of paper sludge to wood particle: 20:80, 30:70, 40:60, 50:50% (oven dry weight basis) and by three composition types, sludge-particle mixed board, three layered sludge-particle board and three layered particle board. They were tested mechanical (bending strength and internal bond) and physical properties (water absorption, thickness swelling and linear expansion). From the results they were shown that bending strength of mixed and three layered sludge-particle board were decreased with increasing of composition ratios of sludge. And the mechanical and physical properties of the boards of three layered composition types have superior to those of mixed composition type. Although composition ratios of sludge increased, the internal bond strength and dimensional stability of sludge-particle board not decreased quantitatively. We concluded that the mechanical and physical properties of three layered sludge-particle board were similar w those of three layered particle-board (control) made by our laboratory design. Therefore, it was recognized that paper sludge can be used as potential raw material in particle-board manufacturing industry.

• 유기물자원화
• /
• 제28권3호
• /
• pp.45-49
• /
• 2020

본 연구는 하수슬러지와 건조연료를 혼합한 혼합물에 대해 토지개량효과를 검토하기 위한 연구이다. 혼합물은 하수슬러지와 건조연료를 중량대비 1:1 비율로 혼합하여 만들었다. 1개의 대조군(0 %)부지와 혼합물을 10 %, 20 %, 30 % 시비한 3개의 비교군을 조성하였다. 토양의 유효인산 함량변화는 혼합물을 시비한 비율에 따라 상관관계가 높은 것으로 확인되었다(P<0.05). 케나프를 90일 재배 후 수확량을 비교한 결과 10 %투입된 배지에서 줄기의 길이가 대조군 대비 73 %증가를 보였으며, 잎 수확량의 경우 20 %배지에서 227 % 가장 높은 증가율을 보였다. 30 %에서는 다른 배지보다 꽃의 개화가 먼저 된 것으로 보아 성장률이 다른 배지보다 빠른 것으로 판단되며 엽록소 함량은 71.6(SPAD)으로 가장 높은 수치를 보여 조단백질의 함량이 다른 배지에 비해 높을 것으로 판단된다. 따라서 건조연료 혼합물의 투입을 통해 전체적으로 식물이 생육하기 좋은 토질로 개선하는데 효과가 있는 것으로 사료된다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1326-1331
• /
• 2009

Drying process in the cylindrical thin film layer of sludge with the thickness less than a few millimeters has been investigated. Thin film drying is specially designed and used to dry the viscous materials like sewage sludge. The thin film layer of sludge is dried on the metallic cylindrical surface through which thermal energy is supplied to the layer during drying. The wall temperature is assumed to be constant during drying in the present study for the simplification. In order to solve the equations, the mass transfer rate on the drying surface should be determined. The mass flux of evaporated water vapor on the surface is estimated with the formulation given in the literature. The effect of some physical parameters on drying has been examined to figure out the drying characteristics of the sludge layer.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1128-1133
• /
• 2008

Drying process in the thin film layer of sludge with the thickness less than a few millimeters has been investigated using the simple one-dimensional model. Thin film drying is usually used to dry the viscous materials like sewage sludge. The thin film layer of sludge is dried on the metallic surface through which thermal energy is supplied to the layer during drying. In order to solve the equations, the mass transfer rate on the drying surface should be determined. The mass flux of evaporated water vapor on the surface is estimated with the formulation given in the literature. The effect of heating temperature, film thickness, and air velocity on drying has been examined to figure out the drying characteristics of the sludge layer.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.437-444
• /
• 2010

Dry Process(natural drying, hot-air drying, oil fry drying), optimized mixture ratio and the condition of carbonization was carried out in order to improve the product durability develop eco-friendly solid fuel mixing food waste and paper sludge. As a result of the experiment, oil fry drying process was the fastest method for drying food waste and paper sludge mixture that contains 80% water inside, and the optimized mixture ratio to minimize the generating concentration of chlorine gas against caloric value of mixture ratio was 7:3. Additionally proper temperature of product carbonization was about $200^{\circ}C$ and shown increasing product durability through the carbonization. Therefore, the pelletized solid fuel be shaped diameter around 0.5cm, length 2cm under which was pulverized and molded using 7:3 mixture of food waste, and paper sludge was the eco-friendly solid fuel possible to be industrialized which is consist of chlorine concentration of below 2.0wt% and the lowest caloric value of over 5,000kcal/kg. In conclusion, this developing manufacturing process of the solid fuel can be interpreted to contribute alternative energy development in accordance with low carbon and green growth era.

• 한국유기농업학회지
• /
• 제9권1호
• /
• pp.61-73
• /
• 2001

This study was conducted to investigate the effect of sewage sludge application on the growth of chinese cabbage and the changes of chemical properties of soil. The experiment were set up with two different place and cultivated from Feb. 10 to June. 20 of 2000. Treatments are 0, 1.25, 2.5, 5, 10 and 20kg/3.3$\m^2$ of sewage sludge applicated into the soil and recorded the growth characteristics. Chemical properties of soil were also analysed before and after treatment. The application of the sewage sludge resulted in increasing the content of EC, cations exchange capacity, available phosphate and organic matter. And increased the growth characteristics in terms of the number of leaves, leaf area, fresh and dry weight regardless of crops experiments. Optimum amount of the sewage sludge depended on chemical properties of soil used. This results demonstrated that application of sewage sludge in the soil attribute to have play an important both improving soil chemical properties and promoting the crop growth. As lowering the soil pH(pH 6) heavy metal content increased compared with higher pH(pH 7). Feasibility was recognized in the application of sewage sludge as a fertilizer for the growth of chinese cabbage. Detrimental effects such as heavy metal in the soil and crop followed by the application of sewage sludge was not observed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.21-26
• /
• 2004

This study deals with the Hydrated Ability of the Ready-Mixed Concrete's Sludge which is the recycling technology of that sludge. The experiment gathers sludge from Ready-mixed factory. shatters these into pieces in dry condition and understands the differences between current using Portland cement. And then. this examines the possibility of the recycle as a bonding agent through the Compressive Strength and considers the recovery of the hydration. This experiment concludes the same Chemical Composition with the normal Portland cement. while. under the appropriate procedure in hydration recovery. this sludge can be used as the bonding agent in cement. The chemical composition of solid Remicon sludge shows that it has 1.8 times $SiO_2$ than the normal Portland cement. meaning lots of aggregate in Remicon sludge. Also. the specific gravity of Remicon sluge increases with the rise of Baking Temperature and has no difference between 2.77 and 2.94. The mortar flow used for combining the baking material of Remicon sludge does was not changed and is the highest between $750^{\circ}C{\cdot}120min\;and\;800^{\circ}C{\cdot}180min$. Additionally. the Compressive Strength increases with the age, certifying the same Hydrated Ability like cement and the best condition for hydration is $750^{\circ}C{\cdot}120min.$

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.353-353
• /
• 2009

It is an important task to construct a recycling society with a low damage on the environment in our century. Magnetic separation is expected to be applied for the industrial waste treatment as an important supporting technology. In the magnetic separation of dry condition, the cohesive force between particles is strong compared with that in the wet condition's magnetic separation. The use of high magnetic field by the superconducting magnet enhances the powder's magnetic substance capture ability of the magnetic separation. In this study, the POSCO's coolant sludge of hot rolled steel was used for the superconducting magnetic separation of dry condition. Cryo-cooled NB-Ti superconducting magnet with 100 mm room temperature bore and 600 mm of height was used for magnetic separator.