• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.2
• /
• pp.66-72
• /
• 1983

In order to improve the quality of salted sea mustard, the conditions of blanching, salting, and storage were examined. The process in which sea mustard was blanched for 20 seconds in boiling seawater, soaked in saturated brine solution for 20 hours and then salted for 10 hours by the spreading 10~20% (w/w) of granulated dry salt to obtain the moisture content of about 60% or below, resulted a good color retention of chlorophyll and carotenoid pigments, and organoleptic quality. The shelf-life of the product estimated by 30-40% pigment retention was 50-60days when stored at $4^{\circ}C$ or below.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.

• Journal of The Korean Association For Science Education
• /
• v.30 no.6
• /
• pp.752-769
• /
• 2010

The purpose of this study was to apply the microgenetic analysis method for development of information on an individual's change in a certain area during a consistent time period to seek change in scientific questions that elementary school students create. The study subjects were six 6th graders in I elementary school located in Kyunggido with the students conducting 6 sessions of two observational tasks about dry grapes contained in soda pop and candlelight. Information were collected through students' scientific question development paper, record of field observation and interviews. The results of this study are as follows: first, the number of scientific questions that the elementary school students developed showed a tendency for reduction; second, the changes in type of scientific questions bring different results, which depend on a particular characteristic of the tasks; third, By observing pattern changes in scientific questions of each individual, it was found that different results show for each time for the same task, which in other words means that there exists variability within an individual. Also, variability between individuals were shown by confirming that the change pattern for each person were diverse. Thus, the result of this study shows the following implications on education of scientific question development. For students, scientific question development mean more opportunities to increase the process of developing and acquiring knowledge. Therefore, it is important to create situations where one can come up with scientific questions. In addition, analysis in tasks' nature when selecting tasks would be necessary to develop diverse scientific questions.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.51-62
• /
• 1990

Pentadentate Schiff base cobalt(II) complexes; Co(II)(Sal-DET) and Co(II)(Sal-DPT) were synthesized and these complexes were allowed to react with dry to form oxygen adducts of cobalt(II) complexes such as [Co(III)(Sal-DET)]$_2O_2$ and [Co(III)(DPT)]$_2O_2$ in aprotic solvents. These complexes have been identified by IR spectra, TGA, DSC, magnetic susceptibility measurements, and elemental analysis. It has been found that the oxygen adadduct complexes of $\mu$-peroxo type have hexaccordinated octahedral configuration with pentadentate schiff base cobalt(II) and oxygen, but the mole ratio of oxygen to cobalt(III) complexes of first step for oxygen adduct formation reaction of cobalt(II) complexes in aprotic solvents are 1:1. The redox reaction processes of Co(II)(Sal-DET), Co(II)(Sal-DPT), and oxygen adduct of cobalt(II) complexes were investigated by cyclic voltammetry and DPP method with glassy carbon electrode in 0.1M TEAP-DMSO and 0.1M TEAP-pyridine. As a result the reduction reaction processes of Co(III)/Co(II) and Co(II)/Co(I) for cobalt(II) complexes and oxygen adducts of cobalt(II) complexes are two irreversible steps of one eletron process, and reaction processes of oxygen for oxygen adducts complexes were quasireversible and redox range of potential was $E_{pc}$ = -0.97V∼-0.86V and $E_{pa}$ = -0.87V ∼ 0.64V.

• Journal of Sasang Constitutional Medicine
• /
• v.10 no.2
• /
• pp.111-150
• /
• 1998

1. Background and Purpose: I intended to understand the medical and pharmacological theory of Taeumin, through a study of the process through which Lee Je-ma discovered the Interior-Overheated-Disease of Taeumin and created the prescriptions for it. 2. Methods: I studied and analized the change in the medical and pharmacological theory, through a historical study on the quotations and prescriptions of "DongYi Soose Bowon". 3. Results: Through a literature study I could find that in the existing Oriental Medicine before Lee Je-ma, the difference of the Liver Febrile Disease of Taeumin and the Stomach Febrile Disease of Soyangin were recognized, and the prescriptions of the two diseases were a little distinguished, but the medical theories of those were not distinguished at all. And I found that the Liver Febrile Disease of Taeumin shows the pain in the eyes and the throat, and drying of the nose due to interior dry and heat, so it is different from the Stomach Febrile Disease of Soyangin that shows irritation of fever, headache, and the trouble in passing feces and urine. Also I could know that Radix Puerariae, Rhizoma Cimicifugae, Rhizoma Ligustici, Radix Angelicae Dahuricae, and Radix et Rhizoma Rhei are Taeumin's medicines because these medicines had been used for Taeumin's syndromes, and that Radix Scutellariae, Radix Platycodi, Semen Raphani, and Fructus Gleditsiae are Tae-Eum-In's medicines because these medicines are known as acting for lung.

• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.161-178
• /
• 2006

Heathcote (1998) identified a systematic, seven-step approach to general watershed planning and management. It consists of 1) understanding watershed components and processes, 2) identifying and ranking problems to be solved, 3) setting clear and specific goals, 4) developing a list of management options, 5) eliminating infeasible options 6) testing the effectiveness of remaining feasible options, and 7) developing the final options. In this study the first five steps of that process were applied to the Anyangcheon watershed in Korea, which experiences streamflow depletion, frequent flood damages, and poor water quality typical of highly urbanized watersheds. This study employed four indices: Potential Flood Damage(PFD), Potential Streamflow Depletion(PSD), Potential Water Quality Deterioration(PWQD) and Watershed Evaluation Index(WEI) to identify and quantify problems within the watershed. WEI is the integration index of the others. Composite programming which is a method of multi-criteria decision making is applied for the calculation of PSD, PWQD and WEI (Step 2). The primary goal of the study is to secure instreamflow in the Anyangcheon during dry seasons. The second management goals of flood damage mitigation and water quality enhancement are also set (Step 3). Management options include not only structural measures that can alter the existing conditions, but also nonstructural measures that rely on changes in human behavior or management practices (Step 4). Certain management options which are not technically, economically, and environmentally feasible, are eliminated (Step S). Therefore, this study addresses a Pre-feasibility study, which established a master plan using Steps 1 through 5.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.243-248
• /
• 2010

Sonic nozzles have been a standard device for measurement of steady state gas flow, as recommended in ISO 9300. This paper introduces two sonic nozzles of diameter ${\Phi}$ 0.03 mm and ${\Phi}$ 0.2 mm precisely machined according to ISO 9300. The constant volume flow meter(CVFM), readily set up in the Vacuum center of KRISS. was used to calibrate the discharge coefficients of both nozzles. The calibration results were shown to determine them within the 3% expanded measurement uncertainty. Calibrated sonic nozzles were found to be applicable for precision measurement of steady state gas flow in the vacuum process in the ranges of 0.6~1,800 cc/min. Those flow conditions are equivalent to the fine gas flow with Reynolds numbers of 26~12,100. Those encouraging results confirm that calibrated sonic nozzles enable precision measurement of extremely low gas flow encountered very often in th vacuum processes. Both calibrated sonic nozzles are proven to provide the precision measurement of the volume flow rate of the dry vacuum pump within one percent difference in reference to CVFM. Calibrated sonic nozzles are applied to a new 'in-situ and in-field' equipment designed to measure the volume flow rate of vacuum pumps in the semiconductor and flat display processes. Furthermore, they can provide other applications to flow control devices in vacuum, such as MFC, etc.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2002.08a
• /
• pp.54-63
• /
• 2002

Post-harvest technology for rice was focused on in-bin drying system, which consists of about 100, 000 facilities in 1980s. The modernized Rice Processing Complex (RPC) and Drying Storage Center (DSC) became popular for rice dry, storage, process and distribution from 1990s. However, the percentage of artificial drying for rice is 48% (2001) and the ability of bulk storage is about 15%. Therefore it is necessary to build enough drying and bulk storage facilities. The definition of high quality rice is to satisfy both good appearance and good taste. The index for good taste in rice is a below 7% of protein, 17-20% of amylose, 15.5-16.5% of moisture contents and high concentration of Mg and K. To obtain a high quality rice, it is absolutely needed to integrate high technologies including breeding program, cropping methods, harvesting time, drying, storing and processing methodologies. Generally, consumers prefer to rice retaining below b value of 5 in colorimetry, and the whiteness, the hardness and the moisture contents of rice are in order of consumer preference in rice quality. By selection of rice cultivars according to acceptable quality, the periods between harvesting time and drying reduced up to about 20 days. Therefore it is necessary to develop a low temperature grain drying system in order to (1) increase the rate of artificial rice drying up to 85%, (2) keep the drying temperature of below 45C, (3) maintain high quality in rice and (4) save energy consumption. Bulk storage facilities with low temperature storage system (7-15C) for rice using grain cooler should be built to reduce labor for handling and transportation and to keep a quality of rice. In the cooled rice, there is no loss of grain quality due to respiration, insect and microorganism, which results in high quality rice containing 16% of moisture contents all year round. In addition, introducing a low temperature milling system reduced the percentage of broken rice to 2% and increased the percentage of head rice to 3% because of proper hardness of grain. It has been noted that the broken rice and cracking reduced significantly by using low pressure milling and wet milling. Our mission for improving rice market competitiveness goes to (1) produce environment friendly, functional rice cultivars, (2) establish a grade standard of rice quality, (3) breed a new cultivar for consumer oriented and (4) extend the period of storage and shelf life of rice during postharvest.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.4
• /
• pp.242-252
• /
• 2016

A process-based ecosystem model, BIOME-BGC, was applied to simulate seasonal and inter-annual dynamics of carbon and water processes for potential evergreen needleleaf forest (ENF) biome in Korea. Two simulation sites, Milyang and Unljin, were selected to reflect warm-and-dry and cool-and-wet climate regimes, where massive diebacks of pines including Pinus densiflora, P. koraiensis and P thunbergii, were observed in 2009 and 2014, respectively. Standard Precipitation Index (SPI) showed periodic drought occurrence at every 5 years or so for both sites. Since mid-2000s, droughts occurred with hotter climate condition. Among many model variables, Cpool (i.e., a temporary carbon pool reserving photosynthetic compounds before allocations for new tissue production) was identified as a useful proxy variable of tree carbon starvation caused by reduction of gross primary production (GPP) and/or increase of maintenance respiration (Rm). Temporal Cpool variation agreed well with timings of pine tree diebacks for both sites. Though water stress was important, winter- and spring-time warmer temperature also played critical roles in reduction of Cpool, especially for the cool-and-wet Uljin. Shallow soil depth intensified the drought effect, which was, however, marginal for soil depth shallower than 0.5 m. Our modeling analysis implicates seasonal drought and warmer climate can intensify vulnerability of ENF dieback in Korea, especially for shallower soils, in which multi-year continued stress is of concern more than short-term episodic stress.

• KSBB Journal
• /
• v.21 no.2
• /
• pp.96-102
• /
• 2006

Recently, it has been known that Hericium erinaceum is a one of the very useful functional materials with great attention in mushroom processing industry. In present study, a liquid culture which was not studied systematically until now, was conducted as a method of cultivation for H. erinaceum, and also examined the characteristics of the liquid culture and conditions of process optimization. A good basal medium was selected through the cultivation of 16 species mushroom media and the optimum condition for medium and cultivation were chosen by response surface method. From these results, the optimum condition of medium for mushroom was 3% glucose, 0.2% yeast extract/peptone(1:1) and 0.1% $KH_2PO_4/MgSO_4$(1:1) and also the optimal culture condition was obtained at inoculum of 13.42%, temperature of $22.3^{\circ}C$ and pH of 5.7. The mycelial dry weight of 9 g/I was obtained under these conditions and this amount was about 1.7 times higher than that which were cultivated in basal medium for 8 days.