• Journal of Information Display
• /
• v.2 no.2
• /
• pp.7-12
• /
• 2001

A viscous Ni solution was coated over amorphous Si thin film for evenly spread of Ni metal source. The Ni s. prepared by dissolving $NiCl_2$ into IN HCI and mixing with propylene glycol. $NiCl_2$ and Ni were deposited on the amorphous film after oven dry and they enabled to obtain a uniform crystallization. The crystallization using the viscous Ni solution was a Ni-silicide mediated process, the same process used with Ni metal layer. The crystallization temperature was lowered to $480^{\circ}C$ by the synergy effect of silicide-mediated crystallization and microwave-induced crystallization. Lateral crystallization was also enhanced such that the velocity of lateral crystallization by microwave annealing became faster than by furnace annealing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.475-478
• /
• 2000

Maxwell displacement current(MDC) was generated when the area per molecule was about 140${\AA}$$^2$and 100${\AA}$$^2$. MDC were investigated in connection with monolayer compression cycles. It was found that the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles. The absorption spectra of polyamic acid containing p-methoxyazobenzene in a mixture of N,N-dimethylacetamide(DMAc) and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. The precursor LB film was heated in a vacuum dry oven at 120$^{\circ}C$ in order to convert it into the LB film of polyimide. The absorption spectra of LB films were also induced photoisomerization by UV and visible light irradiation.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.1
• /
• pp.55-62
• /
• 1998

The absorption spectra of polyamic acid containing p-methoxyazobenzene in a mixture of N, N-dimethylacetamide(DMAC) and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. This solution is influenced on temperature according to measure by UV-Vis Spectrophotometer. Ultra thin film of polyamic acid containing p-methoxyazobenzene was prepared on the hydrophilic quartz plate by Langmuir-Blodgett(LB) method. The precursor LB film was heated in a vacuum dry oven at $120^{\circ}C$ in order to convert it into the LB film of polyimide. The absorption spectra of LB films were also induced photoisomerization by UV and visible light irradiation.

• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.173-177
• /
• 1989

As widely known major cause of tooth discoloration is red blood cell in dentinal tubules after tooth trauma and extirpation. Hemoglobin in the red cells easily conbine with hydrogen sulfide and change natural tooth color into dark brown. To confirm and compare the effect of bleaching agents test material was made as fellows: No. 40 paper points were soaked in blood and put into the oven for 24 hours to dry. Dried paper points were again soaked in diluted yolk by distilled water for a minute and kept the points for a week to get fully sulfide. Hydrogen peroxide (25%), Sodium hypochlorite (2%), Sodium hyposulfate (2%), Sodium perborate and mixture of Hydrogen peroxide (25%) and Sodium perborate were employed as bleaching agents. About 0.2ml of each medicaments were put into the small test tubes and blood soaked paper points were gently placed vertically with the apex downward and kept 24 hours in the oven ($37^{\circ}C$). Every 24 hours the medicaments were renewed at 24 and 48 hours. Following are the results of the study: 1. Significant bleaching effect was found on the case of hydrogen peroxide (25%) after 24 hours. The area above 2mm from apex also fully bleached after 48 hours. 2. A mixture of hydrogen peroxide and sodium perborate treated case showed moderate effect at 24 hours and significant effect at 48 hours. High portion of the point (above 2mm) was bleached satisfactory at 72 hours. 3. The effect of sodium perborate at 48 hours showed moderate and significant at 72 hours. 4. Sodium hypochlorite and sodium hyposulfate were weak agent in bleaching. At 72 hours case revealed moderate effect and influenced on high portion of the point very weak effect.

• Journal of Hydrogen and New Energy
• /
• v.33 no.6
• /
• pp.636-642
• /
• 2022

The "Hydrogen Economic Activation Road map" was announced in 2019, and hydrogen demand is expected to exceed 470,000 tons per year in 2022 and keep increasing. Under this circumstance, it has become important to understand the greenhouse gas (GHG) emissions associated with various hydrogen production pathways. In this study, the evaluation of life cycle GHG emissions regarding the hydrogen produced as by-product from coke oven gas (COG) in steel mill is conducted. To cover the possible range of operations, three literatures were reviewed and their data of inputs and outputs for the process were adopted for calculation. Life cycle inventories and emission factors were mostly referred to GaBi and Intergovernmental Panel on Climate Change (IPCC) guidelines, respectively. When there are multiple products from a single process, the energy allocation method was applied. Based on these sources and the assumptions, the life cycle emission values of COG-based hydrogen were found to be 3.8 to 4.7 kg/CO₂-eq./kg-H₂.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1619-1619
• /
• 2001

Ourwork aims to assess the content of dry matter, protein, cell wall parameters and water soluble carbohydrates in forages without having to handle samples, transport them to a laboratory, dry, grind and chemically analyze them. for this purpose, the concept of fresh forage analysis under field conditions by means of compact integrated NIRS InGaAs-diode array instruments on small plot harvesters is being evaluated for plant breeding trials. This work was performed with the world first commercial experimental forage plot harvester equipped with a NIRS module for the collection, compression, and scanning of forage samples (including automatic referencing and dark current measure ments). It was used for harvesting and analyzing a number of typical forage grass and forage legume plot trials. After NIRS measurements in the field each sample was again analyzed in the laboratory by means of a conventional grating spectrometer equipped with Si-and PbS-detectors. Conventional laboratory analysis of the samples was restricted to dry matter (DM) content by means of oven drying at 105. Routine chemometric procedures were then employed to assess the comparative accuracy and precision of the DM assessments in the spectral range between 950 and 1650nm by the NIRS diode array as well as by the conventional NIRS scanning instrument. The results of this study confirmed that the type of NIRS diode array instrument employed here functioned well even in rugged field operations. further refinements proved to be necessary for optimizing the automatic filling of the sample compartment to adjust for the wide variation in forage material under conditions of extremely low or high harvest yields. The error achieved in calibrating the apparatus for forages of typical DM content proved to be satisfactory (SECV < 1.0). Possibly as a consequence of higher sampling errors, its performance in atypical forages with elevated DM contents was less satisfactory. The error level obtained on the conventional grating NIR spectrometer was similar to that of the diode array instrument for both types of forage.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.36-46
• /
• 2001

This study was to find a way of reusing wood and plastic wastes, which considered as a troublesome problem to be solved in this age of mass production and consumption, in manufacturing wood fiber-polypropylene fiber composite panel. And the feasibility of this composite panel as a substitute for existing headliner base panel of automobile was also discussed, especially based on physical and mechanical performance. Nonwoven web composite panels were made from wood fiber and polypropylene fiber formulations of 50 : 50, 60 : 40, and 70 : 30, based on oven-dry weight, with densities of 0.4, 0.5, 0.6, and 0.7 g/$cm^3$. At the same density levels, control fiberboards were also manufactured for performance comparison with the composite panels. Their physical and mechanical properties were tested according to ASTM D 1037-93. To elucidate thickness swelling mechanism of composite panel through the observation of morphological change of internal structures, the specimens before and after thickness swelling test by 24-hour immersion in water were used in scanning electron microscopy. Test results in this study showed that nonwoven web composite panel from wood fibers and polypropylene fibers had superior physical and mechanical properties to control fiberboard. In the physical properties of composite panel, dimensional stability improved as the content of polypropylene fiber increased, and the formulation of wood fiber and polypropylene fiber was considered to be a significant factor in the physical properties. Water absorption decreased but thickness swelling slightly increased with the increase of panel density. In the mechanical properties of composite panel, the bending modulus of rupture (MOR) and modulus of elasticity (MOE) appeared to improve with the increase of panel density under all the tested conditions of dry, heated, and wet. The formulation of wood fiber and polypropylene fiber was considered not to be a significant factor in the mechanical properties. All the bending MOR values under the dry, heated, and wet conditions met the requirements in the existing headliner base panel of resin felt.

• Geomechanics and Engineering
• /
• v.18 no.2
• /
• pp.179-188
• /
• 2019

This paper presents an experimental study to evaluate the effect of palm oil on the selected basic physical-chemical and geotechnical properties of kaolin. The experimental findings are further compared with literature outcomes investigating similar properties of fine grained soils subjected to contamination by different types of oils. To this end, palm oil was mixed with oven dried kaolin samples-aiding oil's interaction (coating) with dry particles first, in anticipation to emphasize the effect of oil on the properties of kaolin, which would be difficult to achieve otherwise. Oil content was limited to 40% by dry weight of kaolin, supplemented at intervals of 10% from clean kaolin samples. Observations highlight physical particle-to-particle bonding resulting in the formation of pseudo-silt sized clusters due to palm oil's interaction as evinced in the particle size distribution and SEM micrographs. These clusters, aided by water repellency property of the oil coating the kaolin particles, was analyzed to show notable variations in kaolin's consistency-measured as liquid and plastic limits. Furthermore, results from compaction tests indicates contribution of oil's viscosity on the compaction behavior of kaolin - showing decrease in the maximum dry unit weight (${\gamma}_{d,max}$) and optimum moisture content ($w_{opt}$) values with increasing oil contents, while their decrease rates were directly and inversely proportional in ${\gamma}_{d,max}$ and $w_{opt}$ values with oil contents respectively. Comparative study in similar terms, also validates this lower and higher decrease rates in ${\gamma}_{d,max}$ and $w_{opt}$ values of the fine grained soils respectively, when subjected to contamination by oil with higher viscosity.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.241-241
• /
• 2017

Sweet potatoes (Ipomoea batatas (L.) LAMK.,) have been cultivated in Central and South America for about 2000 years and are now grown mainly in Asia and South America. Sweet potatoes are annual in the temperate region, but are classified as perennial in the tropical region. In 2000, the cultivation area of sweet potatoes decreased to about 16,000 ha in 2000, but the cultivation area increased slightly in recent 20,000 ha in Korea. Sweet potatoes do not show higher maximum dry matter production of 120 ~ 150g per plant, and the leaf area index (LAI), which maximizes dry matter production, is known as 3.0 ~ 4.0. As the leaf area increase, the penetration of light into the canopy becomes poor, and sufficient photosynthesis cannot be achieved in the lower leaves, on the other hand the respiration increase, which results in poor dry matter production. This study was conducted to know the responses of sweet potatoes to intensive shading treatment of 80% shading. This experiment was conducted for about 42 days from September 6, 2016 to October 18, 2016 at Gyeongsang National University Experimental Farm, Jinju, Korea. The plant canopy was shaded with black nylon 80% shade cloth suspended 1.2 m above the ground. The photosynthetic rate, stomatal conductance, chlorophyll fluorescence, SPAD and NDVI were measured in 3 replicates every 7 days after shading initiation. After the fresh weight was measured, the samples were dried at $80^{\circ}C$ in a dry oven and measured. By the 80% shading treatment, chlorophyll fluorescence of the treated plants was slightly higher than that of the control, the SPAD value was higher by 3.4 and NDVI value was higher by 0.01. However, photosynthetic rate and stomatal conductance were lower than those of the control. The stomatal conductance of the control were two times higher than those of the control and the photosynthetic rate of the control was four times higher than that of the control. In control, plant showed a tendency to steadily increase in fresh weight and dry weight. However, in the case of shading treatment, the tendency to increase in the fresh and dry weight of tuberous roots was not clear. The fresh weight of shoot showed a tendency to increase steadily while the difference between treatment and control was not large, but tended to decrease after frost.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.2
• /
• pp.81-103
• /
• 1979

The weathered granite soil involves problems in its stability in soil structures depending upon the reduction of soil strength due to the water absorption, crushability, and content of colored mineral and feldspar. As an attemt to solve the problems associated with soil stability, the crushability of weathered granite soil was investigated by conducting tests such as compaction test, CBR test, unconfined compression test, direct shear test, triaxial compression test, and permeability test on the five soil samples different in weathering and mineral compositions. The experimental results are summarized as follows: The ratio of increasing dry density in the weathered granite soil was high as the compaction energy was low, while it was low as the compaction energy was increased. The unconfined compressive strength. and CBR value were highest in the dry side rather than in the soil with the optimum moisture content, when the soil was compacted by adjusting water content. However, the unconfined compressive strength of smples, which were compacted and oven dried, were highest in the wet side rather than in soil with the optimum moisture content. As the soil becomes coarse grain, the ratio of specific surface area increased due to increased crushability, and the increasing ratio of the specific surface area decreased as the compaction energy was increased. The highest ratio of grain crushability was attained in the wet side rather than in the soil with the optimum moisture content. Such tendency was transforming to the dry side as the compaction energy was increased. The effect of water on the grain crushability of soil was high in the coarse grained soil. The specific surface area of WK soil sample, when compacted under the condition of air dried and under the optimum moisture content, was constant regardless of the compaction energy. When the weathered granite soil and river sand with the same grain size were compacted with low compaction energy, the weathered granite soil with crushability had higher dry density than river sand. However, when the compaction energy reached to certain point over limitation, the river sand had higher dry density than the weathered granite soil. The coefficient of permeability was lowest in the wet side rather than in the optimum moisture content, when the soil was compacted by adjusting soil water content. The reduction of permeability of soil due to the compaction was more apparent in the weathered granite soil than in the river sand. The highly significant correlation coefficient was obtained between the amount of particle breakage and dry density of the compacted soil.