• Textile Coloration and Finishing
• /
• v.12 no.5
• /
• pp.301-307
• /
• 2000

Silk fabrics were dyed with Gromwell extracts after mordanted with various mordants and their dyeability, antibacterial.deodorization activity, fastness and change of surface color were investigated. Silk fabrics were mordanted at $60^\circ{C}$ for 30 minutes and subsequently dyed at $40^\circ{C}$ for 30 minutes. The dye-uptake of silk fabrics increased with the concentration of Gromwell extracts and mordants. Surface color of silk fabrics changed differently according to the type of mordants used. Antibacterial and deodorization activities of silk fabrics dyed with Gromwell extracts were good. Cu mordant was more effective for deodorization activity. Dyed silk fabrics showed poor light fastness but good dry-cleaning and perspiration fastness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.393-400
• /
• 2010

This study examines the mordanting effect and multi functional properties of silk fabrics dyed with onion shell extracts that were mordanted with gallnut. The contents of this study are as follows. First, the optimum dyeing conditions were investigated by measuring the K/S value that depended the on dyeing conditions when silk fabrics were dyed with onion shell extracts. Second, the color, brightness, and chroma differences that appear after mordanting with gallnut were investigated by measuring the K/S and Munsell value. Third, the color fastness and antimicrobial activity were measured. When silk fabrics were dyed with onion shell extracts, the optimum dyeing conditions were a dyeing temperature of $70^{\circ}C$, a dyeing concentration of 160%, and a dyeing of time 30min. After mordanting with gallnut extracts, the K/S value increased remarkably and was larger in pre-mordanting than post-mordanting. The H value displayed yellow-red in all cases of pre and post mordanting. However, the H value was more reddish in the order of non-mordanting

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.4
• /
• pp.213-219
• /
• 2007

Glass-to-metal contact should be prevented in the design of any structural glass component. Because glass is extremely brittle and will fracture readily if even a small point load is applied. If the assembly includes a glass component supported by metallic structure, designers should provide a pliable interface of some kind between the two parts. But there happens high demand of glass-to metal contact in semiconductor industries due to adoption of dry cleaning process as one of the good solution to reduce running cost - carry out equipments cleaning with high corrosive and etching gas such as CF4 with keeping process temperature as the same as high service temperature. Therefore the quartz glass have to be received compression by direct contact with metal as the form of weight itself and vacuum pressure and fatigue by vibrations caused by process during the process. In this paper investigation will be carried out on fracture behavior of quartz glass contacted with metal directly under local load and fatigue given by process vibration with apparatus which can give $lox{\backslash}cal$ load and vibration through PZT ceramics to give guideline to prevent unintended fracture of quartz glass.

• 보존과학연구
• /
• s.34
• /
• pp.110-122
• /
• 2013

The Seven-story Stone Pagoda of Jeongamsa Temple consists of dolomitic limestone. The surface of the stone stupa is efflorescene. There are spaces between parts in the stereobate and part of roof at the fifth story and above. The space between parts is colonized by biological contaminants. There are breakaway parts in the third, fifth, sixth, seventh story. The dry and wet cleaning of all the biological contaminants, efflorescene. The steam cleaning of rest of efflorescene. The use of poultice with oxalic acid, were done to remove the rust. Breakaway parts are inosculated by L30 and Por-rok. Spaces between parts are waterproofing by Porrok. After treatment, the efflorescene of part of waterproofing are comparatively scarce. So waterproofing is effective at reduced efflorescene and waterproof.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.640-644
• /
• 2008

Lubricating oil on aluminium surfaces was cleaned by a low temperature plasma process. Oxygen plasma mixed with argon was used, and process parameters were the mixing ratio of argon in oxygen, discharge power, and negative DC potential. The aluminium surfaces were analyzed with FTIR and EDX after the cleaning. It was found that almost all of the oil was eliminated in 20 min. if the oil was pure. Elimination efficiency was highly dependent on operational conditions of the process. The highest efficiency was obtained when treated at 300 W with oxygen plasma mixed with 30% argon applying negative potential more than -500 V on the aluminium surfaces. However, efficiency higher that 60% cannot be obtained at any condition if the oil contained inorganic materials.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.539-546
• /
• 1996

The physical condition of rapeseed delivered to fat industry plants plays a significant role in the formation of the qualitative features of the raw material for oil production and, consequently , of the oil itself. Rapeseed is stored in silos , frequently for months, before it is subjected to processing. During the long storage, the conditions of the seed cover is very important, as the seed cover provides natural protection of the seed against the effect of the environment. Seeds with damaged seed cover are more easily affected by mildew, and the rate of chemical processes. Deteriorating the quality of oil contained in the cotyledons is faster in such seeds. Cracked seed covers facilitates also the growth and development of microorgaism. So as rapeseed damage occurring inthe course of harvest and the post-harvest processing have a negative effect of the quality and quantity of oil the sees contain. The study presented here was aimed at examining the typical process of purcha ing and handling of rapeseed in fat industry plants, in the aspect of the occurrence of mechanical damage to the seeds. Special attention was paid to the condition of rapeseed immediately after combine harvesting : next , the successive stages of technological handling of the seed were examined. observing the operation parameters of the particular machinery and equipment in order to identify those operations which caused deterioration in the quality of the material (sees). Seed samples were taken successively from the following the hopper, prior to cleaning , after cleaning , prior to drying , after drying, from dry rape silo. The total level of damage increased through the handling. The content of unusable contaminants had the tendency to decrease in the successive operations. though the actual values still exceeded levels permitted by standards. The study allow to indicate the operation fo postharvest technological process, which cause the most seed damage as well as gave quantita ive description of the losses occurred.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.1-14
• /
• 2013

The Hongjimun Ogansumun (Five-arched floodgates) is composed mainly of biotite granite, pink feldspar granite and granodiorite that are very similar with granitic rocks around the Seoul. Main damage in the floodgates was gray, yellow and predominantly white discoloration on the surface of stone blocks. All floodgates showed more discoloration in the wall than ceiling, and there were growing stalactite on the ceiling. Scientific analyses determined that the white discoloring substrates were mainly calcite. Therefore, conservation treatment was carried out to remove the substrates by using dry cleaning, high pressure cleaning and chemicals. The floodgates have been restored to good state, but it is still significantly necessary to install drainage on the top of the gates.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.1
• /
• pp.62-67
• /
• 2001

Green technology is being developed up to a point that is feasible not only in an environmental sense, but also in an economical viewpoint. This paper introduces two case studies that applied $CO_2$ technology into nuclear industry. 1) Nuclear laundry : A laundry machine that uses liquid and supercritical $CO_2$ as a solvent for decontamination of contaminated working dresses in nuclear power plants was developed. The machine consists of a 16 liter reactor, a recovery system with compressors, and storage tanks. All $CO_2$ used in cleaning is fully recovered and reused in next cleaning, resulting in no production of secondary nuclear waste. Decontamination factor is still lower than that in the methods currently used in the plant. Nuclear laundry using $CO_2$ looks promising with technical improvements-surfactants and mechanical agitation. 2) $CO_2$ nozzle decontamination : An adjustable nozzle for controlling the size of dry ice snow was developed. Using the developed nozzle, a surface decontamination device was made. Human oils like fingerprints on glass were easy to remove. Decontamination ability was tested using a contaminated pump-housing surface. About 40 to 80% of radioactivity was removed. This device is effective in surface-decontamination of any electrical devices like detector, controllers which cannot be cleaned in aqueous solution.

• 보존과학연구
• /
• s.32
• /
• pp.99-112
• /
• 2011

The three-storied stone pagoda located in Seungansaji temple site consists mainly of medium to fine-grained biotite granite and granitic gneiss, and partly macrocrystalline gneiss, muscovite gneiss and gabbro. The surface of the stone pagoda is extensively colonized by lichen and moss due to surrounding trees and lawns, and severly deteriorated. Therefore, a comprehensive deterioration diagnosis has been carried out and conservation treatment was conducted in this study. For the conservation treatment, dry cleaning is performed throughout all the surface of the pagoda for naturally grown lichen and biological contaminants using a soft brush and wooden knife. Crustose lichen strongly adhere to the surface was removed by wet cleaning using distilled water. Also, protective railings were reinstalled to an appropriate height with taking the distance from the stone pagoda into account. Finally, the ground around the stone pagoda was repaired with clay sand, and dike was installed with a natural gradient to facilitate water drainage.

• The Korean Journal of Community Living Science
• /
• v.17 no.4
• /
• pp.39-48
• /
• 2006

This study was carried out to make a search for the usefulness of marigold plants (Tagetes erecta) as a natural dye. And we have also examined into the dyeability and antifungal activity of silk and cotton fabrics dyed with 2% powdered colorant and 1% liquid colorant. Almost surface colors of silk and cotton fabrics dyed with 2% powdered colorant and that dyed with 1% liquid colorant except for that treated Cu and Fe with mordants were shown by Y-level. $L^*$ values of silk fabrics dyed with 2% powdered colorant were 66.2 to 86.39, those $a^*$ values were -1.97 to 6.09, and those $b^*$ values were 13.69 to 35.97. And $L^*$ values of cotton fabrics dyed with 2% powdered colorant were 78.97 to 89.62, those a values were -3.39 to 0.38, and those $b^*$ values were 5.63 to 15.61 $L^*$ values of silk fabrics dyed with 1% liquid colorant were 34.37 to 85.57, those a values were -7.79 to 12.33, and those $b^*$ values were 15.13 to 82.91, And $L^*$ values of cotton fabrics dyed with 1% liquid colorant were 44.12 to 87.90, those $a^*$ values were -8.37 to 6.18, and those $b^*$ values were 11.65 to 78.87. Colorfastness of silk fabrics against light treated nothing with mordants and that dyed with 1% liquid colorant decreased for a little by second grade, however, that against washing, rubbing, perspiration and dry cleaning were increased over fourth grade. Colorfastness of cotton fabrics in terms of rubbing, light, and dry cleaning, except for washing and perspiration, were shown by over third grade, when that was treated nothing with mordants. Antifungal activities of silk fabrics treated nothing with mordants and dyed with 1% liquid colorant of marigold extracts were shown by 28.9% against Staphylococcus aureus. However, those of Al, Ca, Cu and tartaric acid mordanting were more than 25.5% against Staphylococcus aureus and Klebsiella pneumoniae.