• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.6
• /
• pp.35-40
• /
• 2015

An IP-2 type container is used for the transport of low-level radioactive materials. An IP-2 type metal container was modeled and analyzed for the dropping conditions in normal transport conditions required by NSSC Notice 2014-50, "Regulations on the packaging and transport of radioactive materials." Structural analyses were performed by finite element method, and the acceptability was reviewed by comparing the results with technical standards and maximum allowable stresses of each material. Structural members of the container were modeled as 3D solid elements, and the possible dropping directions were considered in these analyses. Results show that maximum stresses, maximum deformed gaps in the cover, and maximum estimated thickness reduction in structural members were well below the allowable limits; thus, the structural integrity of the container was confirmed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.925-938
• /
• 2010

Depending on network conditions, a communication network could be overloaded when media are transmitted. Research has been carried out to lessen network overloading, such as by filtering, load distribution, frame dropping, and other methods. Among these methods, one of the most effective is frame dropping, which reduces specified video frames for bandwidth diminution. In frame dropping, B-frames are dropped and then I- and P-frames are dropped, based on the dependency among the frames. This paper proposes a scheme for protecting copyrights by encryption, when frame dropping is applied to reduce the bandwidth of media based on the MPEG-4 file format. We designed two kinds of frame dropping: the first stores and then sends the dropped files and the other drops frames in real time when transmitting. We designed three kinds of encryption methods using the DES algorithm to encrypt MPEG-4 data: macro block encryption in I-VOP, macro block and motion vector encryption in P-VOP, and macro block and motion vector encryption in I-, P-VOP. Based on these three methods, we implemented a digital rights management solution for MPEG-4 data streaming. We compared the results of dropping, encryption, decryption, and the quality of the video sequences to select an optimal method, and found that there was no noticeable difference between the video sequences recovered after frame dropping and the ones recovered without frame dropping. The best performance in the encryption and decryption of frames was obtained when we applied the macro block and motion vector encryption in I-, P-VOP.

• Tribology and Lubricants
• /
• v.22 no.5
• /
• pp.269-275
• /
• 2006

Rolling bearings are classified one of the most important machine elements. The various function of bearings are greatly influenced by grease, and higher performance of rolling bearing greases is required to improve bearing lubrication. Three urea/ether oil greases with different composition were synthesized to compare the performance of these greases. The typical grease physical properties were investigated, and life test of these greases was conducted by FE-9 grease life tester. The grease with higher content of the thickener showed higher performance. After these preliminary test, twelve greases were synthesized and evaluated the performance of dropping point and OIT value. And optimized conditions for grease synthesis were selected by SSRED (Six Sigma Robust Engineering Design) using dropping point and OIT value respectively. The optimized grease using OIT value showed longer grease life than that using dropping point. Two greases were synthesized following the optimum synthesis conditions by means of OIT value. Then grease life and other properties of these greases were investigated. These two greasaes showed longer grease life than typical urea/ether oil grease.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.44-48
• /
• 2000

In this study was modify the PRMA for supporting various types of traffic classes such as CBR, VBR, ABR and UBR. For uplink, we use reservation slots and so the performance will not degrade in case of over load conditions. For downlink broadcasting slots for informing the status of slot reservations are used so the high priority priority terminal can preempt. And we use almost same size buffer as the frame size. So we can dynamically deal with, the traffic changes of VBR terminals. It makes easy for the terminals to reserve supplementary slots. Each terminal is reallocated by the priority of traffic classes and so we can easily select the dropping packets in case of overload conditions. As a result, using our scheme, we can get high channel efficiency and get low packet dropping ratio and delay.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2004

One of the most frequently used method for measurement of the degree of sizing (viz., hydrophobicity) is the Stockigt test. However, the Stockigt test was influenced by various factors such as dropping height, dropping amount, dropping speed and viewing angle. The resultant data of the sizing degree on the same specimen also varied according to different testers. Thus, the Stockigt test should be modified to be regarded as a highly reliable and reproducible standard method. For modifying the Stockigt test, it was required to quantify red coloration by reaction between 1％ ferric chloride and 2％ ammonium thiocyante during Stockigt testing. The cameras capturing the serial images during the red coloration process were the CMOS (Complementary Metal Oxide Semiconductor)-type and CCD (Charge Coupled Device)-type cameras. For measurement based on KS M 7025, the CCD-type camera must be used due to its high resolution, and on the other hand, for measurement based on Tappi Useful Method 429, the CMOS-type camera may be used owing to its low resolution. It was needed to covert the RGB values of a droplet image into HSV(Hue, Saturation, and Value) values because the human eyes are much closer to HSV than RGB. Among HSV values, the Hue value was accepted as the most reliable index consistent with the red coloration process by excluding the surrounding conditions such as light, tester's movement etc.

• Journal of Environmental Health Sciences
• /
• v.38 no.2
• /
• pp.118-127
• /
• 2012

Objectives: This study was undertaken to assess the sanitary conditions in the kitchens of food court/cafeterias and determine seasonal variations. Methods: We measured environmental factors (air temperature, relative humidity, illumination intensity, noise level), and dropping airborne microbes (bacteria and fungi) in the kitchens of eight food court/cafeterias in four seasons (January, April, July, and October). Air temperature and relative humidity were measured with in/out thermo-hygrometers at 1.2-1.5 m above floor level. Illuminance measurement was performed through the multiple point method of Korean Standards (KS). Noise level was measured by the standard methods for the examination of environmental pollution (noise and vibration) of Korea. The estimation of dropping airborne bacteria and fungi was performed through use of Koch's method. Results: The highest kitchen air temperature was in July, and the lowest in January. The average temperature surpassed $21^{\circ}C$ throughout the seasons, suggesting a higher temperature than required for the safe handling of food. Humidity in all the kitchens was measured in the range of 50-60%. Half of the kitchens showed illumination intensities below 300 Lux in April. It was found that the sound pressure level of noise in almost all of the kitchens was higher than 85 dB (A). The highest levels of dropping airborne bacteria and fungi were noted in July. The numbers of airborne bacteria were higher than those of fungi. The levels of dropping airborne bacteria and fungi were affected by air temperature, relative humidity, season, and place. Conclusions: This study indicates that the kitchen environments were unqualified to supply safe food. The hygiene level of the kitchens should be improved.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.4
• /
• pp.60-73
• /
• 1973

The reactor noise analysis was performed by the cross correlation method using two detectors to determine the dynamic stability and the system parameter of TRIGA Mark-II reactor under critical and subcritical conditions. The a values turned out to be 46.67 and 70.04 respectively at zero power and full power under critical condition, while 79.47 and 97.59 respectively at the safety rod dropping and the regulating rod dropping under subcritical condition. Prompt neutron life time of TRIGA Mark-II reactor measured 107 and 160 $\mu$sec, and shut down margin was -10.03$\times$10-4 at the safety rod dropping and -29-43$\times$10-4 at the regulating rod dropping CDC 3100/MSOS digital computer, HITACHI 505 Analog computer, and preamplifier, bandpass filter, FM modulator or demodulator designed for this specific purpose, were employed for the present investigation.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.461-467
• /
• 2014

Active queue management (AQM) algorithms run on routers and detect incipient congestion by typically monitoring the instantaneous or average queue size. When the average queue size exceeds a certain threshold, AQM algorithms infer congestion on the link and notify the end systems to back off by proactively dropping some of the packets arriving at a router or marking the packets to reduce transmission rate at the sender. Among the existing AQM algorithms, random early detection (RED) is well known as the representative queue-based management scheme by randomizing packet dropping. To reduce the number of timeouts in TCP and queuing delay, maintain high link utilization, and remove bursty traffic biases, the RED considers an average queue size as a degree of congestions. However, RED do not well in the specified networks conditions due to the fixed parameters($P_{max}$ and $TH_{min}$) of RED. This paper addresses a extended RED to be adapted in various networks conditions. By sensing network state, $P_{max}$ and $TH_{min}$ can be automatically changed to proper value and then RED do well in various networks conditions.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.25-31
• /
• 2010

Polymer core and metal shell composite particles have been prepared by the electroless nickel plating on the surface of monodisperse polystyrene microspheres. Various sizes of polystyrene particles with highly monodisperse state could be synthesized by controlling the dispersion medium in dispersion polymerization. Electroless nickel plating was performed on the polystyrene particle with diameter of $3.4\;{\mu}m$. The morphology of polystyrene/nickel composite particles was investigated to see the effect of the plating conditions, such as the $PdCl_2$ and glycine concentrations and the dropping rate of nickel plating solution, on nickel deposition. With $PdCl_2$ and glycine concentrations at more than 0.4 g/L and 1 M, respectively, more uniform nickel layer and less precipitated nickel aggregates were formed. At the given plating time of 2 h, the same amount of plating solution was introduced by varying the dropping rate. Though the effect of dropping rate on particle morphology was not noticeable, the dropping rate of 0.15 mL/min for 60 min showed rather uniform plating.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.3
• /
• pp.240-245
• /
• 1995

This study was conducted to find out environment conditions in order to increase of growth and yield of tuberlets in pinellia ternata (Thunb.) Breit. The optimal temperature conditions for the growth of tuberlets were good rather temperature fluctuations than constant one and the optimal photoperiod was a 6hr-photoperiod. The growth of tuberlets to the kinds and concentration of growth regulators was good for 0. lppm 2.4- D, 10ppm kinetin and 50ppm gibberellin treatment. In colchicine soaking treatment, the growth of tuberlets was bad, but bulblets formation was good for 0. 05% colchicine treatment for 48hr. -soaking. In colchicine dropping treatment, dry tuber yield was good for 0. 1% colchicine treatment with once dropping for one day.