• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.65-75
• /
• 1998

The $CO_2$ welding with 100% $CO_2$ gas is commonly used because of its cost and efficiency. Arc phenomena and spattering ratio of the $CO_2$ welding are influenced by various factors such as chemical compositions of welding wire, shielding gas, welding condition and welding power source etc.. Spattering ratio is predominantly influenced by the welding condition which determines a droplet transfer rode. In this study, arc phenomena and spattering ratio are investigated by using two type of FCW(titania type, semi-metal type). Then, the welding quality and optimum welding condition can be selected. From this study, the following results ware obtained; 1) In low current range(140A), FCW up to welding voltage(22V) resulted in a typical short circuit transfer, increase of spattering ratio and growth of spatter diameter. 2) In high current range(320A), the arc stability in titania FCW of a typical globular transfer is better than that of semi-metal FCW.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1473-1482
• /
• 2013

A disc-type rotary atomizer affords advantages such as superior paint transfer efficiency, uniformity of paint pattern and particle size, and less consumption of compressed air compared to a spray-gun-type atomizer. Furthermore, it can be applied to all types of painting materials, and it is suitable for large-scale processes such as car painting. The painting quality, which is closely related to the atomizer performance, is determined by the uniformity and droplet size in accordance with the design of the bell disc surface. This study establishes the basics of how to design a surface by modeling the operating bell disc's RPM, diameter, surface angle, and film thickness considering dye characteristics such as the viscosity, density, and surface affinity.

• Journal of Adhesion and Interface
• /
• v.15 no.2
• /
• pp.57-62
• /
• 2014

Pythagolas rule was used for investigation of static contact angle in particular figures. Static contact angle measurement was important to evaluate the wettability between solid and liquid. Optimum measurement method and standardization of calculation for static contact angle were investigated for practical application. Optimum diameter of droplet for static contact angle measurement was confirmed as 1 mm. Contact angle measurement using Pythagolas rule was also used to calculate advancing, receding angle and wettability of different surface condition. At last, it was concluded that the Pythagolas rule method was more accurate than general lineation method for static contact angle measurement.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.6
• /
• pp.84-93
• /
• 2018

Three-dimensional (3D) numerical simulations have been carried out to study how coolant injection conditions influence the cooling efficiency and projectile ejection performance in a mixture-gas ejection system (or gas-steam launch system). The 3D single-phase computational model was verified using a 1D model constructed with reference to the previous research and then a two-phase flow computation simulating coolant injection on to hot gas was performed using a DPM (Discrete Phase Model). As a result of varying the coolant flow rate and number of injection holes, cooling efficiency was improved when the number of injection holes were increased. In addition, the change of the coalescence frequency and spatial distribution of coolant droplets caused by the injection condition variation resulted in a change of the droplet diameter, affecting the evaporation rate of coolant. The evaporation was found to be a critical factor in the design optimization of the ejection system by suppressing the pressure drop while the temperature decreases inside the breech.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.51-57
• /
• 2008

we have demonstrated structural evolution and optical properties of Si-nanowires (NWs) synthesized on Si (111) substrates with nanoscale Au-Si islands by rapid thermal chemical vapor deposition (RTCVD). The Au-Si nano-islands (10-50nm in diameter) were employed as a liquid-droplet catalysis to grow Si-NWs via vapor-liquid-solid mechanism. The Si-NWs were grown by a mixture gas of SiH4 and H2 at a pressure of 1.0 Torr and temperatures of $500{\sim}600^{\circ}C$. Scanning electron microscopy measurements showed that the Si-NWs are uniformly sized and vertically well-aligned along <111> direction on Si (111) surfaces. The resulting NWs are ${\sim}60nm$ in average diameter and ${\sim}5um$ in average length. High resolution transmission microscopy measurements indicated that the NWs are single crystals covered with amorphous SiOx layers of ${\sim}3nm$ thickness. In addition, the optical properties of the NWs were investigated by micro-Raman spectroscopy. The downshift and asymmetric broadening of the Si main optical phonon peak were observed in Raman spectra of Si-NWs, which indicates a minute stress effects on Raman spectra due to a slight lattice distortion led by lattice expansion of Si-NW structures.

• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.279-285
• /
• 2007

We have demonstrated structural evolution and optical properties of the Si-NWs on Si (111) substrates with synthesized nanoscale Au-Si islands by rapid thermal chemical vapor deposition(RTCVD). Au nano-islands (10-50nm in diameter) were employed as a liquid-droplet catalysis to grow Si-NWs via vapor-liquid-solid mechanism. Si-NWs were grown by a mixture gas of $SiH_4\;and\;H_2$ at pressures of $0.1{\sim}1.0$Torr and temperatures of $450{\sim}650^{\circ}C$. SEM measurements showed the formation of Si-NWs well-aligned vertically for Si (111) surfaces. The resulting NWs are 30-100nm in diameter and $0.4{\sim}12um$ in length depending on growth conditions. HR-TEM measurements indicated that Si-NWs are single crystals convered with about 3nm thick layers of amorphous oxide. In addition, optical properties of NWs were investigated by micro-Raman spectroscopy. The downshift and asymmetric broadening of the Si optical phonon peak with a shoulder at $480cm^{-1}$ were observed in Raman spectra of Si-NWs.

• Current Research on Agriculture and Life Sciences
• /
• v.8
• /
• pp.45-50
• /
• 1990

This study was carried out ot investigate the effects of fetal calf serum (FCS) and gonadotropins supplemented to the medium on maturation and fertilization in vitro of porcine follcular oocytes. Ovaries were obtained from gilts at local slaughter-house. Oocyte-cumulus complexes were recovered by puncturing the ovarian follicles(3~5 mm in diameter). The complexes from individual ovaries were pooled in a $0.4m{\ell}$ droplet of medium covered with paraffin oil, then washed twice in fresh droplet and cultured for 36hrs in culture media according to experimental conditions. Boar epididymal spermatozoa were capacitated by preincubation for 4hrs in m-KRB medium and the preincubated spermatozoa were insemenated in the fertilization medium containing the cultured oocytes. The results obtained in this study are summarized as follows: 1. The maturation rates of oocytes cultured in m-KRB and m-KRB supplemented to 10% FCS were 82 and 37%, respectively. When PMSG, hCG. and PMSGt hcG($10Iu/m{\ell}$) were added to the media supplemented to 10% FCS, the maturation rates were 66, 58 and 68%, respectively. 2. Expansion of cumulus cells was not occured in m-KRB and m-KRB supplemented to 10% FCS. However, when PMSG, hCG and PMSG+hCG($10Iu/m{\ell}$) were added to m-KRB supplemented to 10% FCS, the expansion rates of cumulus cell layers were 92, 13 and 91%, respectively. 3. When oocytes were mltured in m-KRB, the rates of penetration and formation of male pronucle: were 93 and 7%, respectively. By adding FCS and gonadotropin to m-KRB, the penetration and formation of male pronuclei were 100 80%, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1881-1891
• /
• 2000

Cenosphere particles of different fly ash formed at the pulverized coal power plant were hollow sphere or filled with small particles inside solid particles. And size was relatively larger than other fly ash particles as well as specific gravity was small to suspend in the water. In this paper, it was demonstrated to contain a variety of morphological particle type, and the physical and chemical properties related to the cenosphere and fly ash particles. Furthermore it was estimated the possibility to reuse the cenosphere particles on the base of cenosphere properties. Cenosphere formation resulted from melting of mineral inclusion in coal, and then gas generation inside the molten droplet. As the aluminosilicate particle was progressively heated, a molten surface layer developed around the solid core. Further heating leaded to cause the formation of fine particles at the core. The mass median diameter(MMD) of cenosphere particles was $123.11{\mu}m$ and the range of size distribution was $100{\sim}200{\mu}m$ with single modal. It was represented that specific density was $0.67g/cm^3$ fineness was $1135g/cm^3$. The chemical components of cenosphere were similar to other fly ash including $SiO_2$, $Al_2O_3$, but the amount of the chemical component was different respectively. In the case of fly ash, $SiO_2$ concentration was 54.75%, and $Al_2O_3$ concentration was 21.96%, so this two components was found in 76.71% of the total concentration. But in the case of cenosphere, it was represented that $SiO_2$ concentration was 59.17% and $Al_2O_3$ concentration was 30.16%, so this two components was found in 89.33% of the total concentration. Glassy component formed by the aluminosilicate was high in the cenosphere, so that it was suitable to use insulating heat material.

• Korean Journal of Animal Reproduction
• /
• v.10 no.1
• /
• pp.100-108
• /
• 1986

Eik-Nes (1966) reported that the mechanism of spermatogenesis is controlled by FSH and LH and maintaned normally in scrotum terperautre which is 3-5$^{\circ}C$ lower than body termperature. But Ojeda and Ramirez (1972) have described that the abdominal testis was shrinked severely and lost its normal function in congenital cryptorchidism or surgically induced cryptorchidism. Ramirez and Sawyer (1974) reported that the compensatory hypertorphy occured in the remaining testis of unilateral castration and the scrotal testis of unilateral cryptorchidism. Cunninham et al. (1978) reported that the serum FSH levle increased after unilateral castration. Frankel and Wright (1982) reported that the serum LH level was unchanged greatly after unilateral castration. Gomes and Jain (1976) reported that the serum testosterone level increased temporarily but not varied after unilateral castration. On the other hand, Kormano et al. (1964) reported that the serum FSH level in unilateral cryptorchidism rat was unchanged in contrast with the control and Risbirdger et al. (1981) reported that the serum LH level was unchanged till 2 weeks after operation and after then increased to 77%. Kim (1984) reported that the serum testosterone level was somewhat lower than that fo control group but there was't significant different. There were many different reports on hormone levels among different investigators when the immarue rats were castrated unilaterally or induced cryptorchidism unilaterally. Liang and Liang (1970) and Cunningham et al. (1978) described that there were no true compenastory hypertrophy in the remaining testis of unilateral castration and scrotal testis of unilateral testis of unilateral cryptorchidism in rat but they grew faster than that of control. Kormano et al.(1964), Damber et al.(1976), Cunningham et al.(1978) and Karpe et al.(1981) reported that the testis weight, germinal epithelia height and seminiferous tubules diameter developed continuously and similarily in the control, the remaining testis of unilateral castration and scrotal testis of unilateral cryptorchidism increased, however, in the abdominal testis of the unilateral cryptorchidism, they were much smaller than those of other groups. In observation of the histological changes in the seminiferous epithelium of control, remaining tesis of unilateral castration and scrotal testis of unilateral cryptorchidism differentiated and developed fully(Cunningham et al., 1978). However, the abdominal testis of unilateral crytorchidism degenerated severely and only the germ cells in early stage and Sertoli cells were found in the seminiferous tubules. (Damber et al., 1976, Gomes and Jain, 1976 and Karpe et al., 1981). By electron microscopic observation, Nagano (1963) and Leason and Leeson (1970) found that the abdominal testis of unilateral cryptorchidism was thicked in boundary tissue, increased lipid droplet in the Sertoli cell, disarranged axial filament complex and increased lipid inclusions in the Sertoli cell.

• The Korean Journal of Malacology
• /
• v.22 no.1 s.35
• /
• pp.13-22
• /
• 2006

Gonadosomatic index (GSI), oogenesis and reproductive cycle of Glossaulax didyma were investigated by the cytological histological obserbations and morphometric data. Samples were collected monthly from the intertidal zone of Biin Bay, Seocheon, Korea, for one year. Monthly variations in the GSI showed similar patterns with gonadal development. In the early vitellogenic oocyte, the Golgi complex and mitochondria were invovled in the formation of lipid droplet and yolk precursor. In the late vitellogenic oocytes, the rough endoplasmic reticulum and multivesicular bodies were involved in the formation of profeid yolk granules in the cytoplasm. A mature yolk granule was composed of three components: main body (central core), superficial layer, and the limiting membrane. The spawning season was from early June to late August, and the main spawning occurred between July and August when the seawater temperature was above $19^{\circ}C$. The female reproductive cycle can be classified into five successive stages: early active stage (December to February), late active stage (February to March), ripe stage (April to July), spawning stage (June to August), recovery stage (August to November). Fully mature oocytes were approximately $250-270{\mu}m$ in diameter.