• Design & Manufacturing
• /
• v.15 no.1
• /
• pp.66-71
• /
• 2021

In this study, die turning injection(DTI) mold design for manufacturing reservoir fluid tanks used for cooling in-vehicle batteries, inverters, and motors was conducted based on multi-field CAE. Part design, performance evaluation, and mold design of the reservoir fluid tank was performed. The frequency response characteristics through modal and harmonic response analysis to satisfy the automotive performance test items for the designed part were examined. Analysis of re-melting characteristics and structural analysis of the driving part for designing the rotating die of the DTI mold were performed. Part design was possible when the natural frequency performance value of 32Hz or higher was satisfied through finite element analysis, and the temperature distribution and deformation characteristics of the part after injection molding were found through the first injection molding analysis. In addition, it can be seen that the temperature change of the primary part greatly influences the re-melting characteristics during the secondary injection. The minimum force for driving the turning die of the designed mold was calculated through structural analysis. Hydraulic system design was possible. Finally, a precise and efficient DTI mold design for the reservoir fluid tank was possible through presented multi-field CAE process.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.199-202
• /
• 2009

Scan design is currently the most widely used structured Design For Testability approach. In scan design, all storage elements are replaced with scan cells, which are then configured as one or more shift registers(also called scan chains) during the shift operation. As a result, all inputs to the combinational logic, including those driven by scan cells, can be controlled and all outputs from the combinational logic, including those driving scan cells, can be observed. The scan inserted design, called scan design, is operated in three modes: normal mode, shift mode, and capture mode. Circuit operations with associated clock cycles conducted in these three modes are referred to as normal operation, shift operation, and capture operation, respectively. In spite of these, scan design methodology has defects. They are power dissipation problem and test time during test application. We propose a new methodology about scan shift clock operation and present low power scan design and short test time.

• Science of Emotion and Sensibility
• /
• v.16 no.2
• /
• pp.195-206
• /
• 2013

The main causes of traffic accidents while driving a car is of the driver's visual distraction. In this study, the color sensitivity of the information projected on the windshield were evaluated for HUD (Head Up Display) system which helps the driver's eyes on the road while driving. The driving Information were projected $9^{\circ}$ downward from front sight $0^{\circ}$ under lab's fluorescent lights, LED floorlights and the TV had having 25 [lux] illumination when driving at night environment and 100,000 [lux] of daylight environment. Munsell color hue of the basic five colors (R, Y, G, B, P) and the color of traffic lights YR, W were the color of the seven characters, each character were outlined by White, Gray except for W. Total of 19 experimental stimuli was shown in the environment of day and night driving for asking visibility information of color, fatigue, preferences, and evaluate the degree of interference. The results came out that the bright Y and G color is visibility significantly for daylight. Second, with the outline of the text, the color of the outline works as a background for luminance contrast effects and affects visibility. Third, without the outline, the glass in front of the vehicle acts as the background and the luminance contrast of characters achieve greater brightness and visibility. The luminance contrast between the stimuli and background should be considered for increasing color visibility for driving information which is an important factor for HUD commercialization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.404-409
• /
• 2005

This paper describes the result of structure analysis and load test for bogie frame. The purpose of the analysis and test is to evaluate an safety which body structure shall be considered fully sufficient rigidity so as to satisfy proper system function under maximum load. Bogie system consists of bogie frame, suspensions, wheel-sets, braking system and transmission system. Among these component, the bogie frame is most significant component subjected to the vehicle and passenger loads. The evaluation method is used the JIS E 4207 specification throughout the FEM analysis and static load test. The analysis and test results have been very safety and stable for design load conditions.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.3
• /
• pp.25-34
• /
• 2002

The road sign in dynamic traffic system is an important element which affects on human cognitive performance on driving. Web-based vision system simulator was developed to examine the cognition time of the road sign in dynamic environment. This experiment the cognition time of the road sign in dynamic environment. This experiment was designed in with-subject design with two factors: vehicle speed and the amount of information of the traffic sign. It measured the cognition time of the road sign through two evaluation methods: the subjective test with vision system simulator and computational cognitive model. In these two evaluations of human cognitive performance under the dynamic traffic environment, it demonstrated that subject's cognition time was affected by both the amount of information of traffic sign and driving speed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.166-174
• /
• 2002

Power steering systems far automobile are becoming ever more popular because they reduce steering efforts of the drivers, especially during parking lot maneuver. In this paper, the controller of the motor driven hydraulic power steering(MDHPS) has been designed and developed. This system uses a power source of DC motor instead of engine power source for power steering drive oil pump. The developed MDHPS system is accomplished a highly sensitive power steering resulted from electronic control under variable driving condition. Furthermore, this system is more improvement than type of engine driving far fuel economy.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.487-490
• /
• 1998

During driving an automobile, drivers push the clutch and transmit gear by their feeling. At the automobile which have the manually operated gear box by using apart designed equipment, for get the semi-auto function, a lot of research to realize the system which have passive transmission and automotive transmission has developed. In this paper, basically using one chip .mu.-comcontrolled the clutch of automobile by means of LPF, F/V converter and TR driver circuit which is designed. In the past, it was controlled the motor by operating relay which is int eh output system to control the clutch. This system some noises is made by on and off the relay, lessen the motor speed and causes many error due to consume the large power on driving the motor. In this paper, to solve these problems the output TR is operated by using one chip .mu.-com decrease the electic power consumption and designed the actuator to control the clutch by measns of vacuum.

• Journal of computational fluids engineering
• /
• v.14 no.1
• /
• pp.62-69
• /
• 2009

The cooling system for electric devices of hybrid vehicles is examined. The present system is composed of coolant paths, inlet diffuser and heat sinks whose shapes are diamond and circular. In this work, inlet duct and fin arrays are combined in proposed models and examined by numerical calculations. Nusselt number and Reynolds number are considered for heat transfer performance. Main focus lies on the looking for optimal model for the cooling system adopted to compact driving module of a hybrid vehicle. The optimal model shows uniform flow patterns in the inlet diffuser and secondary flows after the fins attached to heat source. It is found that the vortical flows around the heat sinks are effective for heat removal mechanism.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.725-731
• /
• 2003

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-.oiling system (MD-ARS) might be one candidate of several systems against the ship's rolling. As the movable range of the mass on the ship is finite, the control system must include restriction on the mass position to protect the device and the ship. This restriction usually causes windup phenomenon and control performance is deteriorated seriously. We adopt anti-windup technique to improve the control performance and demonstrate its efficiency by simulation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.229-234
• /
• 1999

This thesis presents the design method using CAE(Computer Aided Engineering) with the consideration of reliability for optimal gear driving system. The validity and feasibility of the proposed method are verified by the application to transmission of machine tool. The reliability and life analysis is based on the two-parameter Weibull distribution lives of the gears and bearings. Ninety-percent of reliability life is the life of the component or system in million output rotations or hours at which ninety percent of identical components or system would survive under the given loading conditions.