• 한국해양공학회지
• /
• 제24권3호
• /
• pp.72-78
• /
• 2010

This paper presents a design approach of driving system for tidal flat vehicle. Firstly, topographic and geological survey of tidal flat zone was accomplished. 'Anac' located in the west-south coast of South Korea was chosen for the survey area. From the survey, the basic design data such as distribution of gullies size and bearing pressure was obtained. To figure out the shape of driving system, numerical simulations were carried out. Through the numerical dynamic simulations using $Recurdyn^{TM}$, the performance of various concepts of driving system was analyzed. From the results, we propose the conceptual design with the functions: a) low contact pressure, b) powerful driving force transmission, c) adaptation to the ground undulation. To satisfy these functional requirements, the driving system adopts rubber tracks, sprockets, tires and suspensions. The static structural analysis of the frame structure was executed as well, from which the detailed design was drawn out. To validate the performance of the designed driving system, the test vehicle which has gasoline engine of 27HP and mechanical transmission was constructed. The driving tests of the vehicle were performed twice at the "Anac" area, and unveiled its capability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.62-65
• /
• 2004

An optimal robust controller design method for gun driving system is discussed in this paper. The parameters of the gun driving controller are tuned by using the LQR characteristics for the performance and robustness. Tuning method that optimize velocity error gives a significant improvement over the existing PID tuning methods. It is shown that the tuning result of real gun driving system which is regarded as rigidness model or stiffness model satisfy performance and robustness.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.234-240
• /
• 2014

Driving-related injuries associated with elderly drivers are on the rise, although the overall rate of driving-related injuries has decreased. To determine the causes of this trend, we researched existing vehicle systems that use different sensors and signals to promote safe driving. We found that although the systems alert drivers to potential collisions and assist them in finding a location easily, they were created by people who rarely use the systems in their daily lives. For the most part, they're not created by people with driving difficulties caused by health problems, which in turn often afflict the elderly. To address this issue, we analyzed the drawbacks of the current systems and used a focus group of people with body conditions that have declined due to age to discover the problems they encounter while driving. With the focus group, we used diverse research activities, such as observation and interview to demonstrate how new system concepts could be developed for the elderly. Finally, we propose that adequate system concepts for the elderly would improve driving safety and provide a more enjoyable driving environment for this population.

• Journal of Power Electronics
• /
• 제9권6호
• /
• pp.960-968
• /
• 2009

This paper presents a design optimization process for interior permanent magnet synchronous motors (IPMSM) for hybrid electric compressors (HEC) which are applied to hybrid electrical vehicles. A hybrid electric compressor is composed of an electric motor driving section and an engine driving section which is connected to the engine by a pulley belt. A hybrid electric compressor driving motor requires half of the full driving power of a compressor. Even though an engine is not operated at the idling stop mode, the electric motor drives the air-conditioner compressor by itself so that the air conditioning system can produce its minimum cooling capacity. In this paper, the design optimization of an IPMSM for a 42 (V) applied voltage system is studied using the design of experiment (DOE) and response surface method (RSM) of 6sigma. The driving characteristics of this motor drive system are measured and analyzed by experiment.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.38-45
• /
• 2020

The purpose of this study was to analyze the design sensitivity of an independent driving system for disaster response. The research procedure was as follows. First, an analysis model based on the circuit diagram of the driving system was developed. Second, to ensure the reliability of the analytical model, the load-free test results and analysis results were compared. Even if different loads acted on four independent motors, the system was confirmed to be implemented according to the design intent. Finally, the design variables of the analysis model were analyzed to obtain design variables with a significant impact on system performance and stability. The analysis program used simulation X.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.614-617
• /
• 1995

The unbalance heavy-load elevation driving systems are composed of rotating link-mechanism and hydraulic cylinder which actuates elevation and compensates the static unbalance moment of supporting mechanism. Control and compensation of gun driving is very difficult because these mechanism imply highly nonlinearities due to hydraulic fluid characteristics and mechanical rotation of link-mechanism. In this study, through the analysis of manufactured link-mechanism, the optimal link-mechanism design of the elevating system is suggested. Also to estimate the control performance of the unbalance heavy-load elevation servo-control driving system, modeling and simulation of the system are carried out. To prove the reliability of performance estimation program,simulation results are compared with the experimental results. Both results are similar, therefore this program will be helpful to study the control performance improvement of the system.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.48-54
• /
• 2004

플라즈마 디스플레이 패널의 구동실험을 용이하게 할 수 있는 구동실험장치를 개발하였다. 이 장치는 펄스의 타이밍을 컴퓨터상에서 설계하고 시뮬레이션 할 수 있고 이렇게 설계된 타이밍을 사용하여 PLD에 프로그래밍하고 고전압 FET 스위치들을 제어할 수 있다. 이 장치는 기존의 로직 gate IC를 이용하여 하드웨어적으로 스위칭 로직을 구현하는 것 보다 펄스로직의 설계시간을 단축시킬 수 있으며 구동방식의 변경에 따른 펄스의 타이밍 변경도 용이하다. 이 구동장치를 가지고 상용화 되어있는 ADS 구동방식을 구현하여 3전극 AC PDP의 계조구현 실험을 하였다.

• 대한임베디드공학회논문지
• /
• 제19권2호
• /
• pp.115-121
• /
• 2024

Each ADS must have a validation and evaluation scenario for ODD. This requires a large number of scenarios, so a scenario library must be developed. In order to effectively utilize the scenario library, a system that supports testing in the ODD of the user's choice is required. In other words, in order to develop a scenario library, it is necessary to build a database on actual driving road conditions (geometry, etc.). Accordingly, in this study, we establish a domestic driving environment database based on HD-Map for driving safety testing, design a system that can search test target sections in connection with the ODD of the scenario, and present the implementation results. In the future, it is expected that the domestic driving environment database will be able to create scenarios through linking with the scenario library and directly utilize them for scenario-based evaluation of various demand sources.

• 한국정보통신학회논문지
• /
• 제3권2호
• /
• pp.465-470
• /
• 1999

This paper presents a design method of driving system for EV(Electric Vehicle). EV driving system consist of batteries, battery interface system and inverter. The power control circuit of the driving system is simple, since only one PWM(Pulse Width Modulation) inverter is used. These test spectrums and waveforms can be used to determine the filter component ratings as well as to compute the harmonics injected into the source. The hybrid control strategy which can reduced harmonic components. The analysis results indicate that the required capacity of the condenser can be reduced with LC filter. In this paper, the design and implementation of the proposed systems are described and some experimental results are given to show the performance of this driving system. The control strategy of the system to available inverter's power and motor's power and torque is discussed.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.569-578
• /
• 2008

The aim of this study is to propose economical safety driving speed index which those are geometric road status; examine the levels of which those cost-benefit of driving fuel expenditure; are search road safety design and operational technology for driving simulators. For the objective, we analyzed the current status of driving fuel expenditure and driving scenarios by the road alignments, and reviewed driving and technical specifications by the geometric types of road according to the implementation, and extended completion. Throughout the result of this study, diverse related driving information provision service, efficiently driving system is expected to be implemented in the national highway design system.