• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.153-161
• /
• 2004

A vehicle fuel economy is one of the most important issues in view of environmental regulation and customer's needs. In order to improve the vehicle fuel economy, great efforts has been carried out on the components bases. However, systematic analysis of vehicle fuel consumption is necessary for the further improvement of vehicle fuel economy. In this paper, a methodology for the breakdown of vehicle fuel consumption was studied and proposed for systematic analysis of the vehicle fuel economy. The energy equation for the vehicle power train was set up for the analysis of the vehicle fuel economy and simplified to be calculated or estimated using the measured data in a vehicle. The amount of fuel that was used in vehicle components under arbitrary driving conditions was quantified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1625-1627
• /
• 2005

In this paper, equipments arrangements of traction system and electric devices of a double deck train were studied to examine technical reasonableness for driving on the ground and underground. Double deck trains operated in other countries were also considered. For designing the electric devices, two types of accelerations and electric devices arrangements which are based on the current subway system were considered.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.547-550
• /
• 2006

The power split hybrid power train is considered to be one of the most prospective configuration for the hybrid electric vehicle (HEV). Toyota Prius, representing this type of vehicle, showed outstanding performances in fuel efficiency, emission reduction and acceleration. The excellence is largely due to the fact that it utilizes almost all operation modes of HEV. Those modes include ZEV (Zero Emission Vehicle) driving, idle stop, fuel cut-off, power assist, active charging, regenerative braking and so forth. In this paper, a few of the mode operations were simulated using AVL Cruise. Also, control logics to operate the powertrain in each mode were developed. The states of powertrain components were displayed and analyzed. By controlling the three components (engine, motor and generator), it was possible to run the powertrain in several hybrid operation modes.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.442-447
• /
• 2008

A numerical analysis has been conducted to investigate and characterize the unsteadiness of flow structure and oscillatory vacuum pressure inside of a supersonic diffuser equipped to simulate the high-altitude rocket test on the ground. A physical model of concern includes a rocket motor, a vacuum chamber, and a diffuser, which have axisymmetric configurations, using nitrogen gas as a driving fluid. Emphasis is placed on investigating physical phenomena of very complex and oscillatory flow evolutions in the diffuser operating at very close to the starting condition, i.e. minimum starting condition, which is one of major important parameters in diffuser design points of view.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.267-274
• /
• 2009

To predict efficiency of Interior Permanent Magnet Synchronous Motors(IPMSM) and to cope with the demagnetization risk of permanent magnets used in the IPMSM, accurate iron analysis of the IPMSM is very important at the motor design stage. In the analysis, we calculate the operation condition such as rotor speed and current angle. and then, we analyzed the iron loss of the machine for electric vehicle according to its driving condition. From the analysis results, it was shown that the harmonic iron losses of stator are larger than before at field-weakening region. In addition, it was revealed that rotor iron loss mainly induced by stator slot-ripples is independent of current angle and only varied according to the speed.

• International Journal of Railway
• /
• 제8권1호
• /
• pp.21-29
• /
• 2015

This study focuses on the performance enhancement of the levitation and guidance control system in urban and medium-to high-speed magnetic levitation trains. A levitation control system, which is currently being tested in Yeongjongdo, is a single controller that is neither designed nor produced on the basis of redundancy. Hence, vehicular stability and reliability should be improved for the situation in which levitation failure occurs because of a breakdown in a controller during vehicle operation. In addition, the control system should be developed to control electromagnetic levitation considering changes in normal force according to changes in the driving force of the propulsion system.

• ETRI Journal
• /
• 제45권5호
• /
• pp.862-873
• /
• 2023

Determining whether an autonomous self-driving agent is in the middle of an intersection can be extremely difficult when relying on visual input taken from a single camera. In such a problem setting, a wider range of views is essential, which drives us to use three cameras positioned in the front, left, and right of an agent for better intersection recognition. However, collecting adequate training data with three cameras poses several practical difficulties; hence, we propose using data collected from one camera to train a three-camera model, which would enable us to more easily compile a variety of training data to endow our model with improved generalizability. In this work, we provide three separate fusion methods (feature, early, and late) of combining the information from three cameras. Extensive pedestrian-view intersection classification experiments show that our feature fusion model provides an area under the curve and F1-score of 82.00 and 46.48, respectively, which considerably outperforms contemporary three- and one-camera models.

• 한국산업융합학회 논문집
• /
• 제26권6_3호
• /
• pp.1223-1231
• /
• 2023

In the case of internal combustion engine vehicles, transmissions are essential for various reasons, such as vehicle starting and speed control. However, in the case of electric vehicles, unlike internal combustion engine vehicles, a transmission is not necessarily required. Of course, considering the efficiency of electric vehicles, a transmission is necessary, but installing the existing transmission as is has the opposite effect due to increased vehicle weight, so it has not been considered so far. In this paper, a non-contact reducer type using the Arago disc effect is proposed rather than a transmission using a conventional gear train, and the aim is to examine whether this can increase the driving efficiency of electric vehicles while minimizing weight. In addition, the effectiveness of the proposed reducer will be verified by manufacturing and testing it.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.578-585
• /
• 2018

본 논문은 고속철도차량에 전기기계제동장치(EMB : Electric Mechanical Brake)를 적용하기 위한 주요 구성품인 3상 매입형영구자석동기전동기(IPMSM : Interior Permanent Magnet Synchronous Motor)의 설계방법과 이를 이용한 인버터 제어시스템의 압부력제어 시뮬레이션 방법을 제안한다. 최근 자동차에서 주로 사용하는 유압식 제동장치는 유압을 발생시키기 위해 필요한 오일류와 유압 라인의 관리, 유지보수성 및 유압펌프의 동작으로 인한 효율성 등이 문제로 제기되면서 EMB에 대한 관심이 높아지고 있으나 비용증가 및 안전측면의 보완이 지속적으로 요구되고 있다. 공압식 제동장치를 주로 사용하는 철도차량은 EMB 시스템을 적용할 경우 차량 하부에 큰 공간을 차지하는 공기압축기, 제동공기통 및 연결 배관 등의 부품이 필요하지 않으므로 50% 이상의 소형화가 가능하며 인버터를 적용한 전동기 구동방식으로 인하여 상대적으로 빠른 응답속도와 정밀제어를 통해 공주거리를 단축시킬 수 있는 장점을 갖는다. 또한, 철도차량은 다수의 제동장치가 제동력을 분담하는 구조로 설계되어 자동차와 비교하여 EMB 적용이 안전측면에서 유리하다. 본 논문에서는 JMAG을 활용하여 고속철도의 제동 캘리퍼와 제동력 출력에 적합한 모터설계 및 전자계해석을 수행하였다. 제동 압부력 제어 시뮬레이션을 위해 기계구동부는 기존 EMB 시스템에 주로 적용된 볼스크류 형태의 동작방식과는 달리 고속철도차량에 적용된 편심축 회전을 이용한 구동방식으로 모델링하였다. IPMSM 제어를 통한 제동압부력 및 제동력 출력결과는 Matlab/Simulink를 활용하여 JMAG의 IPMSM 모델과 co-simulation을 통해 보였으며 결과의 타당성은 차세대고속철도(HEMU-430X)의 제동사양과의 비교를 통해 검증하였다.

• 한국철도학회논문집
• /
• 제16권1호
• /
• pp.7-13
• /
• 2013

철도차량의 실차 규모 동특성시험은 설비 구축, 대차의 제작 및 시험 조건의 설정등과 관련하여 비용, 시간 등의 증대로 많은 어려움이 따른다. 본 연구에서는 실험실 환경에서 차량 진동문제와 안전성을 평가하기 위한 목적으로 축소모델을 제작하고, 개발된 축소모델이 해당 철도차량의 동특성을 정밀하게 모사하는지를 검증하는 평가방법에 대한 연구를 수행하였다. 축소이론은 Jaschinski 상사기법의 이론을 적용하였으며, 1/10 축소모델을 구축하였다. 본 연구에서는 축소 대차의 상하 진동에 초점을 맞혀 시스템을 제작하였다. 시스템은 구동부, 보기, 대차 등 3개의 하부구조로 구성되었으며, 실제 차량으로 환산 시 400km/hr까지 실험가능 하도록 목표로 하였다. 축소 대차의 설계 및 제작과 함께, 동역학해석 프로그램인 ADAMS/View를 이용하여 고유치 해석을 수행하였다. 전산해석으로 도출된 고유진동수는 실험결과와 비교 분석되었다. 시스템이 가지고 있는 초기 5개의 자유도에 상응한 고유진동수를 비교한 결과, 개발된 상사 이론에 따른 축소모형은 충분한 신뢰성을 확보한 것으로 검증되었다. 본 연구에서 개발된 축소모델은 대학실험실에서 차량진동모드를 모사하는 용도로 기획되었으나, 추후 자유도의 추가보완을 통해 고속철도 차량의 대차와 보기구조 동특성 해석에 활용될 수 있을 것으로 판단된다.