• Journal of Hydrogen and New Energy
• /
• v.26 no.3
• /
• pp.241-246
• /
• 2015

The interest of New Renewable Energy is increasing globally because of the increment of the uncertainty for the energy's supply and demand, and the increment of the frequency in weather anomaly and its damages. One of the New Renewable Energies, Hydrogen receives attention as the future energy that can deal with global environment regulation. Fuel Cell Electric Vehicle (FCEV) is an environment-friendly vehicle that uses Hydrogen as fuel. The electric power for FCEV is generated by chemical reaction with Oxygen from the air and Hydrogen. Hyundai Motor Company (HMC) has developed a proprietary fuel cell system since 2005. In 2012, HMC is the first car maker that mass-produces the ix35 FCEV to the worldwide such as North America, Europe, etc. In order to develop and improve the FCEV technology, data acquisition and analysis of the driving vehicle information is essential. Therefore, the monitoring system is developed, which is consist of datalogger, Automatic Vehicle Location (AVL) server and main server. Especially, WCDMA technology is integrated into the system which enables the data analysis without any restriction of time and region. The main function of the system is the analysis of the driving pattern and the component durability, and the safety monitoring. As a result, ix35 FCEV has successfully developed by using the developed monitoring system. The system is going to take an advantage of development in the future FCEV technology.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.90-101
• /
• 2009

An objective of this study is to suggest a procedure to evaluate vehicle emissions regardless of the driving pattern. Field experiments using portable emission measurement system were conducted under the real world driving cycle. Standardized average for NOx, $CO_2$ emission and fuel consumption rates were calculated while the vehicle specific power distribution within each vehicle speed bin was taken into consideration. Composite emission factor and fuel economy, which were obtained based on the standardized average results and traffic statistics, showed good similarity to those acquired through the conventional chassis dynamometer tests qualitatively as well as quantitatively. Considering that a conventional method obviously has a limitation to reflect various characteristics of the real world, the new approach suggested in this study can be used as an alternative procedure to collect more specific data to establish the mobile emission factors.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.189-197
• /
• 2007

Developed safety system which transfers danger information to rear cars for accident prevention when drivers detect a accident, a dropping or a freezing during driving on the high way. To prevent an accident, each vehicles mount OBU which is made up of a GPS unit and a transmitter-receiver and the trace of road is always renewed and saved in OBU per a regular past distance. When the driver see dangerous situation, transfer a danger pattern and a trace information by pressing button. All cars which receive information compare the received data with the original data. And then, only cars which are located at the rear in a regular distance respond and occur a warning. Performed a road test at the rate of $30{\sim}50$ kilometer a hour using two test cars which saved about 120meter's space between them were mounted OBU which had 447Mhz transceiver. As a result of the experiment, communication between test cars had no problem. Accordingly, it can use a safety driving device because driver can notice a danger situation and set themselves ready for it using this system in advance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2018

AGVS (Automated Guided Vehicle System) is a core technology of logistics automation which automatically moves specific objects or goods within a certain work space. Conventional AGVS generally requires the in-door localization system and each AGV equips expensive sensors such as laser, magnetic, inertial sensors for the route recognition and automatic navigation. thus the high installation cost is inevitable and there are many restrictions on route(path) modification or expansion. To address this issue, in this paper, we propose a cost-effective and scalable AGV based on a light-weight pattern recognition technique. The proposed pattern recognition technology not only enables autonomous driving by recognizing the route(path), but also provides a technique for figuring out the loc ation of AGV itself by recognizing the simple patterns(bar-code like) installed on the route. This significantly reduces the cost of implementing AGVS as well as benefiting from route modification and expansion. In order to verify the effectiveness of the proposed technique, we first implement a pattern recognition algorithm on a light-weight MCU(Micro Control Unit), and then verify the results by implementing an MCU_controlled AGV prototype.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.12
• /
• pp.507-516
• /
• 2019

Costs invested in road maintenance and road development are on the rise. However, due to accidents such as portholes and ground subsidence, the risks to the drivers' safety and the material damage caused by accidents are also increasing. Following this trend, we have developed a system that determines road damage, according to the magnitude of vibration generated without directly intervening the driver when driving. In this paper, we implemented the system using a remote control car (RC car) simulator due to the limitation of the environment in which the actual vehicle is not available in the process of developing the system. In addition, we attached a vibration sensor and GPS sensor to the body of the RC car simulator to measure the vibration value and location information generated by the movement of the vehicle in real-time while driving, and transmitting the corresponding data to the server. In this way, we implemented a system that allows external users to check the damage of roads and the maintenance of the repaired roads based on data more easily than the existing systems. By using this system, we can perform early prediction of road breakage and pattern prediction based on the data. Further, for the RC car simulator, commercialization will be possible by combining it with business in other fields that require flatness.

• Spatial Information Research
• /
• v.23 no.4
• /
• pp.47-56
• /
• 2015

Recently, there has been an increase in the number of people who use the smart-phone navigation for using various latest functions such as group driving and location sharing. But smart-phone has a limited storage space for one application, since a lot of applications with different purposes are installed in the smart-phone. For this reason, road network data with a large space of memory used for map matching in the device for navigation cannot be stored in the smart-phone for this reason map matching is impossible. Besides, smart-phone which doesn't use the external GPS device, provides inaccurate GPS information, compared to the device for navigation. This is why the smart-phone navigation is hard to provide accurate location determination. Therefore, this study aims to help map matching that is more accurate than the existing device for navigation, by reducing the capacity of road network data used in the device for navigation through format design of a new road network and conversion and using a database of driver's driving patterns. In conclusion, more accurate map matching was possible in the smart-phone by using a storage space more than 80% less than existing device at the intersection where many roads cross, the building forest that a lot of GPS errors occur, the narrow roads close to the highway. It is considered that more accurate location-based service would be available not only in the navigation but also in various applications using GPS information and map in the future Navigation.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.781-792
• /
• 2015

This study aims to develop a spring/fall motorcycle jacket for quick service transporter. Depending on the results of the previous research, this study produced the tested jacket which was improved in material, pattern, and design. For the tested jacket, 100% polyester fabric excellent in strength, durability and abrasion-resistance was selected as a major material, and Cordura was used as a partial material to improve the strength and abrasion-resistance of the sleeve side lines, elbow and shoulder areas. The retro-reflection material was applied partially in order to improve visibility of the jacket in the night or in a dark place. A total of 7 pockets were composed in the jacket for the sufficient storage spaces. The functional design elements such as the 2-way zipper and the placket at the center front, the action pleats at the upper part of back armholes, the pit-zip at armpit were applied. In addition, the sleeve pattern was bent with the shape of elbow curvature in time of driving and the back length of the jacket was lengthened 4cm. As a result of the appearance assessment, there was a significant difference from the existing jacket in all items but chest size, shoulder width, cuffs circumference, and jacket hemline circumference. In motion adaptability and field activity appropriateness assessments, the assessment grade for all items was found to be commonly higher than that of the existing jacket, and thus, the tested jacket was assessed to be suitable for a motorcycle jacket design for the quick service transporters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.95-95
• /
• 2009

Single-crystalline Bi nanowires have motivated many researchers to investigate novel quasi-one-dimensional phenomena such as the wire-boundary scattering effect and quantum confinement effects due to their electron effective mass (~0.001 me). Single crystalline Bi nanowires were found to grow on as-sputtered films after thermal annealing at $270^{\circ}C$. This was facilitated by relaxation of stress between the film and the thermally oxidized Si substrate that originated from a mismatch of the thermal expansion. However, the method is known to produce relatively lower density of nanowires than that of other nanowire growth methods for device applications. In order to increase density of nanowire, we propose a method for enhancing compressive stress which is a driving force for nanowire growth. In this work, we report that the compressive stress can be controlled by modifying a substrate structure. A combination of photolithography and a reactive ion etching technique was used to fabricate patterns on a Si substrate. It was found that the nanowire density of a Bi film grown on $100{\mu}m{\times}100{\mu}m$ pattern Si substrate increased over seven times higher than that of a Bi sample grown on a normal substrate. Our results show that density of nanowire can be enhanced by sidewall effect in optimized proper pattern sizes for the Bi nanowire growth.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.11
• /
• pp.1817-1823
• /
• 2020

Objective: The increasing consumer awareness of food, which can provide health benefits and potentially aid disease prevention, has become the driving force of the functional food market. Accordingly, the aim of this study was to investigate the effects of chicken genotype on the macronutrient content, bioactive peptide content, and antioxidant capacity within different breast meat. Methods: In this experiment, three genotypes of chicken, Thai indigenous, black-boned, and broiler (control), were reared with commercial feed under the same conditions. Thirty chickens were slaughtered at typical market age and the breasts were separated from the carcass to determine macronutrient content using the AOAC method. The antioxidant capacities of the chicken breasts were evaluated by in vitro antioxidant assays and the protein pattern was investigated using gel electrophoresis. Carnosine and anserine, which have antioxidant properties in animal tissue, were determined using high performance liquid chromatography. Results: The results showed that breast meat from Thai indigenous chickens had a greater macronutrient content and higher antioxidant capacity compared with the other genotypes (p<0.05). The protein pattern was similar between genotypes, however Thai indigenous chickens had the greatest myosin and actin content (p<0.05). In addition, carnosine and anserine values were greatest in the black-boned and Thai indigenous chickens compared with the broiler genotype (p<0.05). Conclusion: Thai indigenous chicken breast meat may be classified as a functional food as it has good nutritional value and is rich in antioxidant peptides.

• The Research Journal of the Costume Culture
• /
• v.23 no.1
• /
• pp.126-144
• /
• 2015

The object of this study is to develop textile designs and fashion products based on the cultural resource of Jeju Bangsatop, which means a stone tower preventing misfortune and driving out evil spirits. The field surveys of 32 Bangsatops located at 17 villages in Jeju were conducted. As a result, unlike stone towers located in other regions, Jeju Bangsatops made with basalt. In addition, wood and stone birds, Dolhareungbang, and other sculptures are built on the tops. Jeju Bangsatops were classified into four types based on the body form of the tops: Conical, truncated conical, trapezoid, and irregular shaped Bangsatops. Jeju Bangsatops located in a area or a village are symmetrically arranged in direction of south and north, left and right, east and west, or face to face. The conical, truncated conical, and irregular shaped Jeju Bangsatops which are designated as folk cultural properties or which have the unique sculptures of stone birds and the statues of Dolhareungbang built on the tops were selected as motifs for textile pattern design. The 4 basic patterns of Jeju Bangstops were designed. The six creative textile designs were developed by the various repeat arrangements of the basic patterns and were printed on oxford cotton fabrics by digital textile printing (DTP) method. The sixteen products of wallets, bags, hats and shoes were actually made with the DTP fabrics, the DTP fabrics which were naturally dyed in gray and blue colors, or the DTP fabrics which were redesigned with textile crayon. Therefore, it is confirmed that Jeju Bangsatop could be very useful as a motif for the development of cultural products focusing on Jeju tourism souvenir market.